Reviews
I can make it.
Rear brakeMaintenance is also purchased, compared with other Manufacturer other people are told, but the price is a little expensive, I think that making is good, Plate diaphragm ? Although Diaphragm is required, preparation of O-ring and attachment Screw diverted or exchange premise is necessary, the place of installation Screw is somewhat but since it is being processed so that the neck can be adjusted, it can be adjusted. View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
very good
I was able to put it on just right, it's really good, but taking it off takes a bit of force but it's great. It looks really good. I really like it. Wherever I go, people are watching. I can put it right, it's really good, but when I take it off, it takes a little bit of effort, but it looks great and looks great It is recommended to buy. View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
brake lever adjustment bolt
Brake lever adjustment bolt from Kohken for Brembo Radial Master White Logo and Red Logo The engraving is made of SUS304 Titanium Coating, golden color Kohken Brake Pads for Brembo Radial Master White Logo and Red Logo The engraving is made of SUS304 Titanium Coating gold. ( translated by Google Translator) View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Reliable because the color of OEM Parts Number is different
It is the same Manufacturer as OEM Parts Number, because it is the same shape color difference, it was able to install without any processing without any problem.
I think that it is a handy Custom that can change the appearance of the conspicuous part because it can be done to change Fluid and not cost much too much.
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
It is cute though it is astringent
• 【What made you decide the purchase?】 I also like White Oil tank and I like to wear a Wrist band, but I wonder if that's fine.
• 【How was it actually used?】 There is no problem at all. Favorable.
• 【Was it difficult to install? (Hard parts case)】 I'm wondering what type of Tank Bracket to buy.
? Please tell me the point of installation and hang (Hard parts case) It depends on Motorcycle, it is different, it is different in the form of the original MASTER and Oil tank, but there is a possibility of interfering somewhere.
• [Is there anything I was disappointed about?] None.
? [Hope for Manufacturer - Please tell me if there are any improvement points】 None
• 【Have you compared items?】
• [Others]
View detail
Fits: YAMAHA YZF-R25, HONDA CB250F, その他 , HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOL D'OR, HONDA GROM, HONDA GROM, HONDA 400X, HONDA CB1100, HONDA CB500F, YAMAHA YZF-R3, HONDA 400X, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, YAMAHA MT-09, SUZUKI GSX250R, HONDA Forza300, YAMAHA MT03, KAWASAKI Z125 PRO
Looks good to BlueBlack
Blue color of Anodized is gathered up as Accent in the whole of BlackBase.
I use it together with MASTERSinterCap of the same series
View detail
Galespeed oil tank for rear master cylinder
Great quality as usual from Galespeed and much cheapre than Brembo, really reduce a bunch of oil lines from the rear of the bike View detail
brake oil line and end cap
Brake fluid line and end cap from Kitaco. The cable is well made. brake fluid does not bite And does not harm the cable. The end cap is meticulously produced. And colors look beautiful. (translated by Google translation) View detail
Easy Maintenance
lightweight and easy maintenance. Feel Racing. Beautiful. thank you webike for good product. because you can see the amount of oil in the line View detail
I like host color
Ready to use. Easy to install. Best product. I like hose color. I can see dirt in brake system. It beautiful and is not that expensive. View detail
To prevent Rust
I used GALE SPEED 's Clutch holder, but when I notice it suddenly Rust on the surface of Pivot pin ...
I am surprised that this is iron!.
Whether the Black coating on the surface is weak, Rust seeped out from the Edge part.
Since it can not be helped, exchange Pivot pin. While praying that it is Gold this time, but while wishing not to rust, pour Silicon spray all over, Pivot part painted Molybdenum grease and then incorporate. The work itself takes only about 10 minutes.
It is nice to be beautiful. Since Brembo of Brake master is also changing to Titanium's GoldPivot pin, (Lol)
Although it does not have the function as well as a function, it is perfect for a bonsai Motorcycle because its appearance is beautiful (Lol)
View detail
Mr. Jita
I think Cost performance is better compared to each Titanium Bolt 64 0 0 Or this was Set sales so do not measure Length Do not hesitate to purchase
Other Titanium Bolt and Nut also bought Size which is in Mr. Zeta
What I can say for all items is that they are good products together
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Cool
I tried putting on a trendy place.
Used in combination with Nisshin's separate body MASTER.
I installed it using Universal's Bracket and H Type Rubber.
It looks better than the original White Cup.
View detail
Fits: Others RCSMaster Cylinder(Brake/Clutch)
A similar Pivot arrived at GPMachine
【What made you decide the purchase?】
At some time before Events, GPMachine (Was it Rossi 's Machine? A similar thing is attached to the Pivot of Brake lever of the Brake lever, and I thought that I would definitely put in the brembo Master cylinder someday when I put my brembo Master cylinder.
This time, I purchased & installed it after exchanging from Oremble of brembo to Cut-outLever of Other Company Product.
【How was it actually used?】
As Lever changed together, the shape of Lever changed and Impact is strong and the shadow is thin, but I feel that the feeling when I stroke Lever is not different from OEM's Pivot, to be honest.
Just at OEM's Pivot, the coating on the surface has already been scraped off at less than 3000 kilometers so you can check on how much improvement is the durability of Stainless Steel Material and Titanium coating which is the selling phrase of this product Maintenance can be confirmed later I think that pleasure has increased.
【Mounting was difficult?】
At the same time, the outside Cut - outLever set which was installed at the same time was a thing with a high degree of difficulty in installation, so we asked the Motorcycle shop, who was always indebted, to perform the installation work.
【Please tell me the installation point and hang】
When OEM or Nisshin 's Master cylinder, the Master cylinder itself was inexpensive so I was maintaining without thinking anything, but since the brembo' s Master cylinder is quite luxury goods, the Master cylinder is broken I think that it is better to use Torque for tightening so as not to.
Just fixing the Pivot with Hexagonal Wrench while loosening the Nut on the lower side of the master cylinder and replacing it.
If you are familiar it will not take less than 5 minutes.
[Is there anything I was disappointed about?]
It is longer and heavier than OEM's Pivot.
Regarding Length, I think that the clearance of Tank and Master cylinder is fatal to vehicles with Limit, but my car is NAKED of Pipe Handlebar so there is no problem.
As for weight, aside from Racer running with Circuit, I have not seen it as a problem, since it is not a thing which changes by Motorcycle used in public road to a few Gram weight and becomes heavy.
Rather it is more important for me to obtain durability Up and Dress-up effects of Stainless Steel & Titanium coat from Steel.
【Hope for Manufacturer - Please let me know if you have any improvement points]
None
【Have you compared items?】
- KOHKEN KOKEN (Formerly photo-irradiated) : Lever Pivot Brembo RCS Master BlackXCoat
I thought Black was also astringent, but that was not the same as OEM if that was it!.
[Others]
I think that there is difficulty in wearing on vehicles with Clearance Limit, but I think that this luxurious sense of presence is quite Cost performance although it is inexpensive.
When replacing with brembo's Master cylinder, how about another one Plus?
View detail
Fits: Others , Others , Others , Others , Others , Others , Others , Others , Others
I think that it is a good product with good looking and no rattling.
I bought it to attach brembo MechanicalSwitch to FRANDO's Radial brake. I am satisfied that I can install Exactly. View detail
Solid product
bremboetc. A little Hose thin is not sold to the nearby Parts store so buy it with Wye Big.
Size is also Exactly also as an adaptation item.
View detail
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR50, HONDA NSR100, HONDA NSF100
It looks good Parenthesis.
Although it is not necessary to change it, it is a casual one point that is cheap compared to NORMAL which does not pack with iron.
I like the engraving of GCraft so casually.
I feel a little expensive, but I am satisfied.
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
OEMMaster cup has deteriorated and replaced
OEMCup for 10R began to crack due to aged deterioration, so at this time I exchanged to the scaling type of spear.
It is very easy to install it for H2 just by removing Fluid and replacing it.
It was a good shopping, because the parties who entered the field of vision exchanged the satisfaction was also high.
Fluid is also recommended for the Green type of Active!
View detail
Fits: Others
Just use it for cutting.
Although I was worried about exchange, angle, etc. because I got a Motorcycle scratched a bit, I was worried so soft and durable, so I could install without worrying, there are clasps to stop Hose, sold separately, but at least two I thought it would be nice if it came in. View detail
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR50, HONDA NSR100, HONDA NSF100
Hi all, This product is of the highest quality and finish, fits perfectly and works great. I would highly recommend this to anyone.
Hi all, This product is of the highest quality and finish, fits perfectly and works great. I would highly recommend this to anyone. View detail