Reviews
It is a quintessential Pitchli state.
The finish is so beautiful that it is hard to resist. The workmanship is really high, light and rigid, and the anodized treatment is even and perfect.
When installed, it has a solid Size feel, which we can expect to support us well when the need arises.
The instruction manual was not included, but it is very easy to install the Z125PROOEM Mirror by simply tightening the Bolt or Mirror together, which is difficult to see.
Since it is mounted on the end of HandlebarRight, we didn't want to install too much weight, and this super lightweight, high rigidity (Probably so.) I was able to realize that I was very happy with the AGRAS product.
And we've been through this before. (Lol) Even if the mirrors are co-tightened, the fluid tank may be damaged, so it is also a good idea to install a fluid tank just in case.
The only negative point is the price, since the construction is good.
View detail
Fits: HONDA DREAM50, HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSF100
Easy installation with dress-up effect
I rarely fall down, but I bought this because I was going to attack with "KillUp" from now on. I would prefer not to have a chance to test the effectiveness of this product, but it's a good thing to have. It is easy to install with a little knowledge. It is also quite visible, so it has a high dress-up effect. View detail
Installed on JC92 Grom
I purchased and installed it for a sense of security to prevent damage to the slot side in the event of a fall.
I haven't tipped it over yet, but it looks sturdier and stronger than I expected.
However, on the 92 Grom, the edge of the CableGuard was near the base of the Throttle, so when I gripped the Grip, my fingers hit it a little.
At first it was uncomfortable, but one gets used to it and now it does not bother me.
In my case, it was a Bar end mirror, so I left it as it was, and since it was a pontoon, I think the Normal mirror and others are the same as others' impressions.
I thought the cosmetics were not squeaky clean and a little expensive, so I'll give it a 3.
View detail
Fits: KAWASAKI Z650RS, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
I tried Gold.
KRT is being finished in Gold. ?
I like it a lot!
View detail
Fits: Others , YAMAHA NMAX125, KAWASAKI KSR110, KAWASAKI Z125PRO, KAWASAKI Ninja250R, KAWASAKI KSR PRO, KAWASAKI D Tracker 125, HONDA PCX160, HONDA PCX HYBRID, HONDA PCX, HONDA PCX150, HONDA MSX125, HONDA GROM, HONDA MSX125SF, HONDA ADV150, HONDA XR100Motard, HONDA Ape100 Type-D, HONDA CB125R, HONDA MSX GROM, HONDA CROSSCUB110
Protection for Master Cylinder and Dress-up
I think this product will protect Master Cylinder in case of a fall, and it will also lead to a dress-up.
Gold was selected to match the Inverted Front Fork and Billet lever.
View detail
Fits: HONDA CBR600RR, KAWASAKI Ninja250SL, KAWASAKI Z250SL, KAWASAKI Z250, KAWASAKI KLX250, KAWASAKI KLX125, KAWASAKI Z125 PRO, KAWASAKI NINJA250R, KAWASAKI NINJA250, KAWASAKI KSR110, KAWASAKI 250TR, YAMAHA XT250X, YAMAHA WR250X, YAMAHA WR250R, HONDA XR50 MOTARD, HONDA XR400 Motard, HONDA XR250MOTARD, HONDA XR250BAJA, HONDA XR250, HONDA XR230
Perfect for SEROW in Blue.
Perfect for SEROW, which is filled with Blue/Blue.
I am satisfied because it does not interfere with Mirror.
View detail
Fits: YAMAHA TZR50, YAMAHA RZ50, YAMAHA TZM50, HONDA NS-1, SUZUKI street magic, YAMAHA TZR50, HONDA XR100 Motard, HONDA NSR50, HONDA Dream 50, HONDA XR50 Motard, HONDA NS-1, SUZUKI street magic, YAMAHA TZR50, HONDA XR100 Motard, HONDA NSR50, HONDA Dream 50, HONDA XR50 Motard
It is good kana rather than there is nothing, although it does not die easily to a master cylinder even if it fails to get off the ground!?
It is good kana rather than there is nothing, although it does not die easily to a master cylinder even if it fails to get off the ground!? View detail
It purchased for the purpose of the dress-up up. Since attachment only removes one bolt which has stopped the brake lever, it is very easy. As for the attached comment, the circumference of a handle becomes a beauty!! Since it is fairly high when
It purchased for the purpose of the dress-up up.
Since attachment only removes one bolt which has stopped the brake lever, it is very easy.
As for the attached comment, the circumference of a handle becomes a beauty!! Since it is fairly high when the back falls and a master cylinder breaks, it is safe if this is attached ^^
View detail
Fits: KAWASAKI NINJA250, KAWASAKI NINJA400, KAWASAKI Z250, KAWASAKI Z400
Mounted on Z400Front brakes master
[How is it used?
Model used:Z400
Driving in Touring Main.
About 2 weeks after installation.
Was the one you received as per Image?
The red coloring of the Anodized is also good, and I felt it would be good to increase the number of red Anodized areas on the body.
Was the installation difficult?
To install, remove the Fluid Tank Cap Mounting Bolt and install this product without removing the Fluid Tank Cap, using the long stainless steel bolt provided.
The work itself is simple, but since the bolt on the Fluid Tank Cap has a +Screw, it must be removed using a good precision driver.
Note that +Screw should be loosened with a pushing force of 6 and a turning force of 4, rather than with full force in turning, to avoid licking the screw head.
How was your experience with it?
Although it has only been installed for a short time, the coloration of the Anodized is satisfactory and has improved the appearance.
Since this product is a Guard, there seems to be no doubt that it will protect the MASTER well in terms of shape, although it is for insurance purposes in the event of a fall.
Although it can improve the appearance, Z400 can recommenendation to those who compete in Gymkhana competitions with Normal master.
High SIDE may not work, but SlipDown would provide protection.
The holding of Anodized will be verified in the future.
The edge processing was a little lax in some areas, and it was a little unfortunate that the anodized material was a little peeled off in these areas.
[Included Parts:were they on?
Stainless bolt
[Was there anything that disappointed you?
Edge treatment
Point and hang of installation
Loosening of Fluid Tank Cap+Screw
Pushing force 6, Turning force 4
Installation of the included Stainless bolt
To avoid seizure and other troubles whenever possible, it is recommended to use Anti-seeds, CopperThread, Molybdenum grease, and Molybdenum anti-seizure agent for tightening.
Note that a Hexagonal Wrench should be used for installation.
View detail
Fits: HONDA PCX, HONDA Dio110, HONDA ZOOMER-X, HONDA MONKEY125, HONDA CT125, HONDA MONKEY125
very satisfied
Delivery is fast and I am very satisfied with the product. I have ordered so many products from Webike. However, these high-quality and in good condition products are really reliable. We recommend this product to those who love and like bikes. Reliable product, fast delivery, I am very satisfied with the result. I am very satisfied. I will order again and trust. Thank you, I love you. I will order today. I have ordered so many products from Webike. However, these high-quality and in good condition products are really reliable. For those of you who love and love bikes, Now I recommend this product. Reliable product, fast delivery, very satisfactory results I like it very much I will order again and trust thank you Love it I'm taking orders today View detail
Fits: SUZUKI KANATA, SUZUKI GSX1300R Hayabusa, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
The price is high, but I am satisfied with the product.
The screw is also included for installation, and it is easy to just put it over the OEM Master Cylinder.
Also, the Gold color is stronger and more luxurious!
View detail
Fits: HONDA PCX, HONDA Dio110, HONDA ZOOMER-X, HONDA MONKEY125, HONDA CT125, HONDA MONKEY125
To dress-up the Handlebar area
Purchased for protection Plus looks.
The Handlebar area is always in view.
Custom is highly satisfying.
View detail
Fits: YAMAHA TZR50, YAMAHA TZM50, SUZUKI STREET MAGIC, YAMAHA TZR50, YAMAHA RZ50, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR50, HONDA NS-1, HONDA DREAM50
Minimize damage
It helps prevent Fluid leaks in the event of a fall. View detail
Fits: HONDA PCX, HONDA Dio110, HONDA ZOOMER-X, HONDA MONKEY125, HONDA CT125, HONDA MONKEY125
Dress-up effect rather than practicality
It is better to have Parts in case of emergency.
Usually as a dress-up! Looks better now!
It's a totally different atmosphere without it!
View detail
Fits: HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA FE501, HUSQVARNA TE150, HUSQVARNA TE250, HUSQVARNA TE300, HUSQVARNA TX125, KTM 125XC-W, KTM 150XC-W, KTM 200XC-W, KTM 250EXC-F, KTM 250XC-W, KTM 250XCF-W, KTM 300EXC, KTM 300XC-W, KTM 350EXC-F, KTM 350XCF-W, KTM 350XCF-W, KTM 450EXC-F
Fallen cannibals
Since I have been running more and more in Narita, Hino, and Whitei, I installed this as a precaution to prevent the Clutch master from being damaged and becoming undriveable. The actual product is very heavy and rigid, and I was worried that Handling would become heavy. I was worried that it might make the handling heavier, but I didn't feel any effect. So far, Clutch master is safe. If there is a possibility of hitting the rocky ground or the trunk of the tree, I think that it is the Parts that there is no loss if I install it. View detail
Fits: KAWASAKI Z650RS, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R SE, KAWASAKI NINJA ZX-4R
this cylinder guard fits perfectly
this cylinder guard is very beautiful and it's fits my bike perfectly. very easy to install and no special tools required. View detail
Just in case.
It protects the Master Cylinder and the Throttle in the event of a fall.
It was easy to install and seems to be strong enough.
View detail
Fits: KAWASAKI Z650RS, KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R SE, KAWASAKI NINJA ZX-4R
Master cylinder guard
It is a product to protect Master Cylinder at the time of a fall, but Dress-up effect is also high, and it is a good product. Because it is a part that enters eyes while driving, there is a dress-up effect more than I thought. View detail
Fits: YAMAHA TZR50, YAMAHA TZM50, SUZUKI STREET MAGIC, YAMAHA TZR50, YAMAHA RZ50, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR50, HONDA NS-1, HONDA DREAM50
Master Cylinder cannot be cut.
If you fall over and scrape it off, the Fluid will bleed. I think it's good because it prevents that. View detail
Fits: Others , YAMAHA NMAX125, KAWASAKI KSR110, KAWASAKI Z125PRO, KAWASAKI Ninja250R, KAWASAKI KSR PRO, KAWASAKI D Tracker 125, HONDA PCX160, HONDA PCX HYBRID, HONDA PCX, HONDA PCX150, HONDA MSX125, HONDA GROM, HONDA MSX125SF, HONDA ADV150, HONDA XR100Motard, HONDA Ape100 Type-D, HONDA CB125R, HONDA MSX GROM, HONDA CROSSCUB110
Ideal for those who want One point
It is only one item to be installed on Master Cylinder, but it attracts attention.
I decided to use Gold to match the color of the front fork.
It's a world of self-satisfaction, but I would recommend it to myself.
View detail