Reviews
Easy to use as a Universal Hose.
I used this Hose because I couldn't use the OEM Radiator-Hose because I appropriated the Radiator from another car.
It's available in a wide range of sizes, so if you need to replace your Hose, this is a great product to try.
It would be much easier to use and less wasteful if you could select the length as well as the Size in detail.
Personally, I like the blue look and feel of it because it's very Custom.
View detail
Used to change the handling of the Radiator when it is replaced
When I replaced my STREET TRIPLE Radiator with another model of Radiator, I had to change the way the Radiator hose works. I had to use it.
The Universal Pipe is available in a variety of diameters and angles at a fraction of the cost of other products.
I would say it's worth the price, but aside from the angle, the Pipe itself is not a beautiful circle. I was worried about leaks when I first installed it, but it hasn't leaked in over a year, so I guess accuracy is not that much of a problem.
It's worth a try if you're considering getting around the Hose yourself.
View detail
It's definitely better than Tie Wrap!
The front fork on a motorcycle is always moving with the road, isn't it?
But have you ever wondered how much it's working?
I often see them installed on Motorcycles that run on Circuit Stroke sensor
Some of the modern motorcycles are equipped with an electronic stroke sensor But the Large Motorcycles are not included Tie Wraps are often used for Displacement Volume motorcycles and the like Sometimes I put it on and substitute it
I'm one of them...Tie Wrap is enough! And I've used it until now
However, if you put too much pressure on it and stop it, it can cause damage to the inner tube when you chew on debris or something If you tighten it gently, it won't work
I think I could do this one because it can be done briefly, but when I was rummaging through the We-Big, I found the Stroke I found a thing called sensor
Hmm, the price in its own way
And it's only 1pc. so I guess I could use Tie Wrap
But I bought it for the long-term Inner Tube Damage and for the sake of looking good! It was
I installed it on YAMAHA's YZF-R25
It's GOOD because it looks cooler now
View detail
As a matter of fact, it's good
If you know the amount of Pre-road and Bottom, the rest is not so necessary, so you can use In-Hemp Palmick is enough But the accuracy and slippage are very safe and gentle to Fork I felt the price is too high View detail
It's good for less aggression to Riding Pants
I was looking for something else because the OEM Knee Grip Pad is slippery, and the aggression to the Pants I was looking for something less and came across this product
You can cut it to your desired shape, but it's also easy to cut and paste the knee The grip is no longer slippery and has improved
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S
visually satisfied with the appearance of
It's been 15 years since I bought my motorcycle, so I had to replace the coolant water by Timing Replace with SiliconHose
Motorcycle is Red, so I changed Hose to Blue
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S
I'm happy with the way it looks
The coolant hose has deteriorated and has been replaced
Buy the book SiliconHose to stand out from NORMAL
At the time of the replacement, the exhaust pipe of the exhaust system had to be removed as well It took some time for this to happen
View detail
Fits: KAWASAKI ZZR1100, KAWASAKI ZX-11
Hose length is wrong. It's not safe to use
I posted to the We-Big query and got an in-play email with no response I think it's disrespectful to the customer or they're fooling the customer I think it's best to reply to the problem as soon as possible View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750
Bonsai Parts
Well or something, is not it inconspicuous function Parts, is it impression - - -
Our Motorcycle also exceeded 55,000 km, Gasoline Drain hose was Rubber cushion and so on getting fucked a lot and there was still resilience but decided to exchange.
I thought that exchange was also good except for Dress-up a while ago, but because the price was settled internally and it was where I was stepping on my foot, the boat that went on over there.
It is time to exchange, but anyway.
Although the difficulty level of the work itself is not so large, in order to install it on the GSX - R 750, it is necessary to detach the Throttle body. This is another troublesome work.
First, drain coolant from Drain of Water pump, thrust Hose from Radiator Cap part and thoroughly clean the route with tap water. Finally SiliconHose replacement work after draining water becomes colorless and transparent.
Remove Cowl, remove Tank, remove Air cleaner box, Throttle body finally Cylinder Access to Hose connection behind Access.
So I never took it off, so Hose clamp dig into Hose and can not come off.
It's already standing like this! It's bitefully stuck + the place is not tasty and the power to enter the hand holding the Hose clamp does not enter. Even with Wrench, it is difficult to put force in the direction to remove it, fighting with Silicon spray and fighting It was not long ago that Hose fell off in about 30 minutes.
Because it was relatively easy to remove the other parts, loose the Hose Band in various places and exchange Hose.
When fitting Hose, it is easier to apply Silicon lightly to the Nipple part and then work.
Once you get all set up, reassemble from Slovo to Cowl in reverse order this time, tighten CoolantDrain bolt tightly and put in a new Coolant.
When the Radiator Cap is about to overflow, add the Coolant while crushing the newly installed Hose and rubbing it and bleeding air.
If you do not need it any more, tighten Cap, engine it and check the operation of Thermostat - After confirming that the Radiator fans turn, cut engine and leave. After the water temperature has dropped to about 60 ° C, open the cap, add the reduced Coolant, tighten the Cap and repeat the engine and repeat until the Coolant does not decrease. After putting a specified amount of Coolant in Reserver tank, wash the whole vehicle and finally end the work.
It was 14 o'clock in the day that started and finished at 9 am.
Large It took a variable time...
Although it looks, it is hiding in Cowl and it really looks shiny ww
Well because I had expected it.
Since performance is not clearly understood, it can be said that it is just a bonsai Parts.
As Coolant replacement is an indispensable work, it is inevitably time-consuming work, so I think that it is best to do according to the Timing of Coolant exchange. The degree of difficulty itself is not difficult as I wrote earlier, but since it takes time anyway it may be right to throw to a Motorcycle store if it is troublesome.
View detail
Can I use it for Front suspension adjustment?
I purchased thought to use for adjustment of Front suspension in Circuit driving.
Easy to install, just plug in White resin and stop with Spring. I think that it will end in less than 1 minute.
Although it can be used for pre-road adjustment of Front suspension, since only the place where you made the most Bottom is known, if you make a full Bottom even while you are traveling, it will be stopped at the same position each time. It is almost meaningless to make the Front suspension softer than a certain amount.
As an appearance effect, a Race ish atmosphere appears.
It is not necessarily indispensable, but I think Motorcycle can be SS.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Ninja 1000 (Z1000SX)
It will be good in terms of performance but as a bonsai Parts effect Large
When my car also got close to 6 years, Radiator hose also became new as Rubber parties came to harden, so I switched parts I care about each part.
Although it is installation, there is also a mounting part of Hose behind the Engine, so it was easier for the person who removed the Throttle body to find it, so I removed it at the time of removing OEMHose.
By the way Clip holding Hose is pretty hard so I think that Radio pliers are also possible, but I think I'm Hose clip pliers mandatory.
Partly, since the thickness of Hose itself is thicker than OEM, NORMAL's Clip does not stop and I find the appropriate Size and install it.
After that I added the water temperature Meter, so I cut off Hose in order to let Sensor interrupt in the middle, but cut it with Large miscellaneous with Scissors and made it with Cutter.
It seems to be a 4 layer structure, but it can be soft and crispy.
Finally, put cooling water and check if there is no air vent and leakage is finished.
Kawasaki car unique Lime green ColorHose shines and I am sure of my satisfaction UP!
View detail
Stroke quantity is visible so it is easy to manage
I have not done Suspension setting until now, but after installing this product, I can grasp how far I am using the amount of Stroke, Front - It became possible to adjust to the comfortable ride including Rear and it changed to what it thinks is really the same Motorcycle. Once purchased it will not be replaced so I think Cost performance is good. View detail
Fits: KAWASAKI ZX-11, KAWASAKI ZZR1100
Hose
Easy to install because the shape is the same as NORMAL. Recently there are not too many kinds of Radiator hose for ZZr 1100, but this item is also reasonable and I will recommend it. I made the color Green, but it is Cool. I am satisfied.. View detail
Used for cbr 1000 rr
Since it reached about 50,000 kilometers, I exchanged Hose. You can attach a shape and quality without problems.
The color selected Blue. Red or Color : Yellow was good, but I wrote sunburn and it was written so it is safe to be Blue.
Hose that looks a little from Cowl is good.
View detail
I bought this part as a stand hook for my Z800.First of all, you need to insert a spacer at the root of the hook bolt, for the hook bolt installation screw of Z800 swing arm is not flush with the swing arm.I secured minimum clearance with
I bought this part as a stand hook for my Z800.
First of all, you need to insert a spacer at the root of the hook bolt, for the hook bolt installation screw of Z800 swing arm is not flush with the swing arm.
I secured minimum clearance with two pieces of spring washer, because the screw size washer interfered with the spring arm. (Applied screw lock to prevent loosening)
I bought this part for my maintenance stand, but actually, I also wanted to decorate the swing arm!
The titanium color will not weirdly stand out, and it also matches with the color of the chain adjuster. It blends in with the swing arm without stressing its existence, and I am satisfied with it.
* M8 screws can be used on Z800.
View detail
I had been using a insulation locking band instead of a stroke sensor, but decided to try this part because it said that I could install it without disassembling the front fork.The tip of the spring is threaded and you can connect it by making it
I had been using a insulation locking band instead of a stroke sensor, but decided to try this part because it said that I could install it without disassembling the front fork.
The tip of the spring is threaded and you can connect it by making it into a circle. Still the spring force is a bit strong, and you might find it hard to make it into a circle by threading its tip.
Once you install it, you will feel like "That's all?"
It's just a product to measure the front stroke amount, nothing special. But it's a necessary part for the setting operation.
However, I think its price makes one hold back from buying it.
I think it should have a price like 1500 yen or so, but maybe it's priced this way for there are almost no other competitive parts in the market. For this reason, I posted 4 stars.
View detail
It was used also by all the vehicles (ZRX1200 ZRX1200 DAEG).If you have got to know and managed the amount of Strokes, it is convenient in it being various at the time of a Setting.It is worries whether by a Spring, although it is fixation, it is separate
It was used also by all the vehicles (ZRX1200 ZRX1200 DAEG).If you have got to know and managed the amount of Strokes, it is convenient in it being various at the time of a Setting.It is worries whether by a Spring, although it is fixation, it is separated and lost for a while ... View detail
[Webike Monitor] It was a Hose which there is pliability, and may manage and be easy to carry out. I would like to be easy to become also in appearance, to feel, and to have come to change a portion besides ! to this Hose.
[Webike Monitor] It was a Hose which there is pliability, and may manage and be easy to carry out.
I would like to be easy to become also in
appearance, to feel, and to have come to change a portion besides !
to this Hose.
View detail
The Stand hook of NEX Performance. It is used at the time of Swing-arm-slider manufacture. Although coloring is also good sufficient result, it is kana [ want / a device ] to form ...
The Stand hook of NEX Performance.
It is used at the time of
Swing-arm-slider manufacture.
Although
coloring is also good sufficient result, it is kana [ want / a device ] to form ...
View detail
[ -- the Webike Monitor ] -- it is very better for appearance than being attached simply and aiming at a Stroke by a Cable tie too! Even if it does not remove a Fender, a white Teflon is inserted in, a little Spring is pulled, and it is ラクラク wearing
[ -- the Webike Monitor ]
-- it is very better for appearance than being attached simply and aiming at a Stroke by a Cable tie too! Even if it does not remove a Fender, a white Teflon is inserted in, a little Spring is pulled, and it is ラクラク wearing in a screwed type!
View detail