Reviews
Silencer Inner Replacement
I bought this to replace the Glass Wool on Striker's Bolt on silencer that I purchased used about 5 years ago.
At first, I was thinking of using DAYTONA's Ceramic coated Glass Wool in combination with NeoFACTORY's Reasonable Glass Wool, but when I rose the Silencer, I found what looked like Stainless wool wrapped around the Punching part. However, when I rose the Silencer, I found what looked like Stainless wool wrapped around the Punching section, so I decided that it would be better to use Stainless wool wrapped around the Punching section.
The product I received was smaller than I expected, but when I spread it out, it was long enough to wrap around the Punching part twice, and it was just right. Then, I wrapped NeoFACTORY's ordinary glass wool on top of it, and wrapped needle gold on top of it to fix the Silencer.
I have tried to play the engine, and the sound was not so different from before I changed the contents.
View detail
The pull is quite Large.
This is a very well-made handlebar with beautiful plating.
The Narrow Trucker Bar was a TRACKER-like Position Image.
I used it on a TW200, but it was squeezed to make it Narrow and the position is much more drawn forward.
If that is your preference, it is fine, but if you are too pulled in by the name TRACKER, the Image may be a little different.
I am 180cm tall and when I held Handlebar, I felt like I was standing upright.
It is suitable for those who like to ride Style sitting on the street.
View detail
Used for PositionHazard
The switch of PositionHazardRelay harnessKit was broken due to deterioration, so I replaced it with this one. 3-position switch (ON-OFF-ON) was needed, but it was a little difficult to modify due to the special wiring. It is usable for now, but I wish it had a more sophisticated design. View detail
I appreciate the low price, high quality, and the fact that I can buy from 1pc.!
[How is it used?
I purchased the Bullet Type Terminal when I needed to replace the Blinker on my old car, Yong FourType.
Was the one you received as per Image?
It was more solid than Image. It is totally different from the one from a hundred-odd different places.
Was the installation difficult?
With Electric Works Pliers, crimping is easy.
How was your experience with it?
So far, the contact is energized and usable without any defects at all.
[Included Parts:were they on?
Nothing.
[Was there anything that disappointed you?
Not particularly
I'm glad I bought it because it's the perfect size. I think it's good to buy it as an adjustment when you are almost to the Gold amount for free shipping.
View detail
Fits: KAWASAKI W400, KAWASAKI 250TR, SUZUKI ST250, KAWASAKI W650, SUZUKI GRASS TRACKER, HONDA GB250 CLUBMAN, HONDA CB400SS, YAMAHA SRV250, YAMAHA SR500, HONDA FTR223, SUZUKI RV200 VANVAN, SUZUKI VOLTY, YAMAHA DRAGSTAR250, Others , YAMAHA SR400, YAMAHA XS650, YAMAHA RENAISSA, YAMAHA VIRAGO250(XV250), YAMAHA TW200, YAMAHA TW225E
W800 has short length
I drive a 20 year old Kawasaki W800.
I was looking for a glossy plastic material because the existing white grip had a problem of burning due to the rubber material.
The material is satisfactory, but the grip is relatively short compared to the handle.
When purchasing, please refer to the benefits. I'm just using -------------------------------------------------- -------- I have a 20-year Kawasaki W800. The existing white grip was a problem that was burned because of the rubber material, so I was looking for a glossy plastic material. The material is satisfactory, but the grip is relatively shorter than the handle. Please refer to this when purchasing. I'm just using it. Powered by Google Translator
View detail
Lowdown that is optimal for me.
I thought NORMAL would be fine for my cautious 173cm, but I still thought I would like a net with a little more leg room when stopping at traffic lights, etc., so I bought it.
Since it is 1cm lowdown on the Seat surface, it is not necessary to protrude the Front.
And when the car was originally parked on the side stand, it was at the right angle to prevent the car from leaning too much, thus killing two birds with one stone.
View detail
GOODS 5-3/4 Bates Light Kit
I purchased the headlights of the goods company. It is mounted on the w800 and I am satisfied with its more beautiful appearance. I am satisfied with the change from heavy to light. Go ahead and buy it. Thank you. View detail
Installed on TT-R125LWE!
Size and sound are also good.
Installation was Bolt On.
View detail
RearRefreshing
OEM was good, but I took the plunge. The quality and appearance were good. The only thing is that it came with an installation manual, but I didn't understand it very well and finally installed it after looking around for a video on the Net. View detail
Exhaust SystemBlack since I purchased it.
I installed a black exhaust system, but the exhaust pipe looked like it was floating, so I bought this. When installing it, you need rubber gloves because it is prickly. View detail
Fits: YAMAHA SR400 (FI model is also available), YAMAHA SR500 (also compatible with FI models), YAMAHA SR400 (FI model is also available), YAMAHA SR500 (also compatible with FI models)
GOODS Pipe Work Front Fender Kit - 1980 SR500 19 inch wheel
Seems to be very well made. Very sturdy stabilizer. I feel like the fiberglass fender could've used a few extra plies to make it thicker. I was able to snake the stabilizer into position without taking apart the front wheel. I first positioned the stabilizer only between the front forks and attached the fender to the stabilizer afterwards. I used blue Locktite to on the screws that attach the fender to the bracket. The bike has a left disk brake, and there was no interference with the brake caliper. View detail
Good looking, good price
If you are worried about ETC placement, this is a must-recommendation.
I think it is easy to use.
View detail
for Brembo
Caliper from brembo has a different Screw Pitch than Nisshinetc. so I have to buy this one.
I appreciate the fact that it has a Copper Washer for what it's worth.
View detail
Fits: YAMAHA SEROW225 W, YAMAHA SEROW225 WE, YAMAHA BRONCO, YAMAHA SRX250, YAMAHA XT350, YAMAHA SEROW225, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200
Heavy-duty filter; can be used repeatedly.
It can be used many times compared to paper OEM Parts. View detail
Processed to VM38.
I bought this for a YamahaXV750E with two VM38Carburetors.
Quantity since it is a 2-stack:I bought 2pc
I once bought a 2-sided Cable for another car model, but it was not long enough and the Piece of the 2-sided part was not enough φ38Carburetor could not be opened.
The VMcarburetor is a type that directly pulls up the throttle valve, so the wire stopper is a traditional gourd shape.
There are some available, such as for SUPER CUB, but I was concerned because the lengths do not match and they seem to be very poor.
Surprisingly, I could not find one for Large size vehicles, and after much searching, I found that GOODS sells one for SR400 and purchased it.
They said it was forφ38Carburetor, but it is only for AMAL364TypeThrottle holder, so it needed Outer processing.
In my case, I have a two-stack, so Tommaselli's Quantity:2pc pull Throttle is used.
It is a pull×2Type instead of a pull/reverse, which is a bit unusual in modern times.
The Inner cable was not long enough at all, so we cut the Outer by 7cm.
The Crimp in the end section was also ported.
Thailandco used Active's products, but since Screw alone seemed to fall out, Solder was poured to fix it in place.
I was able to install it successfully, and since it can be adjusted in the middle of Cable, it can be tuned out.
View detail
Good quality
It's good to give off a classic look. Good finish and neat design. It's easy to adjust the handlebar size because there's an extra gasket in it. View detail
A must have for classic outlook
Good build quality for any retro bike, preventing dust and rain water from outside to shock absorbers. Highly recommended product! View detail
It's perfect.
I am satisfied with the solid construction for the price. View detail
quite painful
It was used for VOLTY.
The appearance, including the texture, is very good.
I have not tried other suspensions of this length, so this is subjective, but the impact is still not comparable to OEM and is quite painful even at the softest setting.
However, I think the people who choose this length are mostly concerned with appearance, so I think it is a very good evaluation.
View detail
Don't ever make a purchase possible!
SSK's product was also Large outlined, but
The only thing I managed to do when I roasted it with a heat gun was to
This can be seared to death and bent in the opposite direction of distortion.
The distortion will return to its original distorted state and the distortion will not be corrected.
Also, the product image looks like Carbon.
The back side was FRP with a dirty finish.
View detail