Reviews
crimping
This is used for re-crimping due to Cable disconnection from the terminal construction part.
Single Item sales, not too expensive, so it is good for purchasing only the quantity you need.
View detail
Construction
Wiring is missing and used for re-installation.
Single Item sales are inexpensive, so you can buy only the quantity you need.
View detail
exchange
Since there was discoloration and deterioration of the used products as the terminals were reconnected, the Cover was also replaced with a new one while it was being used.
Since it is a Single Item sale, it is good for purchasing only the quantity you need.
View detail
Cover
When the terminals were re-installed due to wire breakage, the cover was deteriorated and discolored, so it was replaced with a new one together with the new cover.
Single Item sales and reasonable prices are good for those who want to purchase only the number of items they need.
View detail
Fits: YAMAHA XSR155, YAMAHA MT-15, YAMAHA XSR155, YAMAHA MT-15
This is what retrofitted Parts are like.
[How is it used?
For ChainMaintenance
Was the one you received as per Image?
Well, not like this.
Was the installation difficult?
Throw in your favorite Motorcycle shop.
How was your experience with it?
Sufficient for the intended purpose, but stability is uncertain
[Included Parts:were they on?
Nothing, no instruction manual.
[Was there anything that disappointed you?
The Center Stand is only an external parts, so it is a bit expensive, but it is for those who can use it with discretion.
I installed it with a normal muffler and it came on without any problem, but it is better not to use it if you are planning to replace the exhaust system.
View detail
Size 5-3/4 suitable for many front tank models. There are high and low lights. and notification light View detail
Replace with new one
The Connector used was old and the claw was broken, so it was replaced with a new one.
Single ItemSince it was sold, it was a great help.
View detail
Power Supply Branch
Used for branching and connecting Power Supply Cable.
Single Item sales were helpful because I could buy only the kind I wanted.
View detail
Branch
Used for branching of Power Supply Cable.
Single ItemThey are sold and the price is not that expensive, so it was very helpful.
View detail
exchange
The Connector we were using was discolored and deteriorated, and was hard to detach and attach, so we replaced it.
It is sold as a Single Item, so I was able to purchase only what I needed.
View detail
exchange
The Connector we were using was discolored and deteriorated, and was hard to detach and attach, so we replaced it.
It is sold as a Single Item, so I was able to purchase only what I needed.
View detail
I'm not buying anymore.
Two weeks after installation, I tried to remove it because it was interfering with my work.
Screw on SIDE is stuck and cannot be removed.
If you are prepared to buy it with the knowledge that you will not be able to remove it, it may be a good price point.
I wouldn't choose it again, though.
View detail
Plating is Beauty, but durability is a problem
[How is it used?
I purchased this bracket to change to a bracket that can be directly attached to the front fork when converting to a front disc.
Was the one you received as per Image?
Plating is more Beauty than expected.
Was the installation difficult?
The fork is sandwiched with rubber to prevent damage to the fork, but the attachment itself is of the sandwiching type, so it can be easily installed without detaching the fork.
How was your experience with it?
I have used it without any defects, but it is easily distorted when force is applied due to interference, etc., so it is not strong enough.
[Included Parts:were they on?
Mounting Screw is included.
[Was there anything that disappointed you?
It is thin Steel, so its strength is weak.
The one made by ▼Posh is made in the same way, so we recommend this less expensive one.
View detail
Fits: YAMAHA VIRAGO250(XV250), HONDA CB400SS, HONDA FTR223, HONDA GB250 CLUBMAN, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W650, SUZUKI GRASS TRACKER, SUZUKI ST250, SUZUKI RV200 VANVAN, SUZUKI VOLTY, YAMAHA DRAGSTAR250, YAMAHA RENAISSA, YAMAHA SR400, YAMAHA SR500, YAMAHA SRV250, YAMAHA TW200, YAMAHA TW225E, YAMAHA XS650, Others
Defective item
It was defective; one of the two was governor.
It was difficult to install after purchase, so I could not process a return.
View detail
Low-profile License Plate Base
[How is it used?
If you have a Fender Eliminator, there is a risk that the License Plate may bend, so we purchased a base plate as reinforcement.
Was the one you received as per Image?
The quality is not bad, but since it is FRP, strength needs to be taken into account to a certain extent.
Was the installation difficult?
It is easy to fix by simply clamping it onto the License Plate.
How was your experience with it?
Quantity:Pair (for Left and Right) The reverse side is attached with Carbon Seat, and the other side is attached with Carbon Seat. [Color] Clear is blown on it so it seems to be easy to clean.
[Was there anything that disappointed you?
It is thinner than you might imagine, so it is likely to be cracked by a Damage that hits it. It is a reinforcement to prevent the License Plate from bending.
View detail
We will be reverting back to OEM.
When replacing the OEMHeadlight, the Light is too small and all the Wiring that was originally in the OEMLight is now out of the Light.
I asked my favorite motorcycle shop to install it, but they couldn't help me. The handlebar area was too messy.
Design is very Parenthesis, so if you still like it, I recommend this product!
View detail
Fits: KAWASAKI 250TR
Large satisfaction with sound and ease of installation work.
After I got my motorcycle license, I bought a motorcycle for the first time and I got used to driving it, and I was not satisfied with the normal muffler anymore. I bought it because I thought it would be easy for me, a beginner, to install. The installation was easy and the sound of the Exhaust System is great and it makes it even more fun to drive. View detail
SR400 is perfect.
I reverse-mounted it on my SR400. I like the angle of the droop and aperture, and the texture of Stainless Steel. The switch, grips, and wires are also fine as they are in NORMAL. View detail
Compared to OEM
The OEM was worn out, so I replaced it with a new Seat, and the pitch is perfect, so no modifications are needed. View detail
42.7mmPipe Clamp
I purchased this product to make an exhaust system for my YamahaXV750E.
42.It is used for Clamp when assembling 7mm Exhaust pipe.
The actual Pipe outer diameter is 45mm since it is used on the assembly side.
It is a very ordinary Stainless Steel Exhaust Band, but I chose it because of its claim that it is SUS316, which is more corrosion resistant than the common SUS304.
I would expect high corrosion resistance, as OEM exhaust bands on older motorcycles often stick or decay due to rust.
It would be great if you could keep it clean to look at since the Band will be in a position where it can be seen from the outside.
View detail