Reviews
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
ca1374
We need to retrofit my friend's SUPER CUB CUSTOM with the necessary spare parts that will positively affect the operation of the equipment over time. One of the main things is to protect the internal parts of the engine from small chips (which are formed during engine operation). This plug is the optimal solution to this issue. View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
ca1374
My friend found out that I have bolts with a magnet on all my equipment to collect chips from the engine cavity. He asked to buy this bolt for him on a HONDA SOLO, too. Upon arrival, he handled the installation himself and he really liked the quality of the material!!! View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Large I'm satisfied.
This was my first time replacing a tire, but the wheel was also rusted and had a bad hole in it, so I replaced the wheel and tube altogether. I was prepared for the quality because of the low price, but Large was totally durable. After painting and assembling, I am satisfied with Large. The store responded to my questions right away and shipped my order immediately after I placed it. View detail
Tanaka Shokai (TANAKA) Tanaka Show Kai Seat StopperRubber Se
It is a good product that fits perfectly. View detail
in line with the price
I am thankful that it is much cheaper than OEM Product.
It is also nice to know that the body can be any color since it is Carbon Style.
With JC61, if I wanted to use the collar that came with the OEM, I had to use a drill to widen the hole.
If you use Bolt without collar, it may not be necessary to modify it, but I am afraid that it may crack.
For people who prioritize cost performance anyway.
View detail
Fits: HONDA dachshund, HONDA Shirley.
OEM Equivalent Product
The front hub bearings were sticking and the shaft axle was worn, so we replaced them with new bearings. The paint was very good and the bearings were already greased up, so it was just a matter of assembly. View detail
Parenthesis good!
I installed it and I am satisfied with its appearance and Parenthesis.
However, the Change Pedal and the sub-frame interfere with each other because the engine is set to 125cc, and it seems that some ingenuity is required for installation.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, HONDA CHALY
CROSS CUB (JA45)
Used for CROSS CUB (JA45)
The one from a certain Manufacturer is too expensive, so I chose this one.
It doesn't feel Aluminum-ish, but the texture is usually good.
It is also easier to turn when adjusting, increasing practicality.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Necessary thing
Защита маятник нужная вещь. По просьбе друга купил ему . Она прекрасно подошла на его Honda Monkey. Теперь он доволен и радуется использованием. Отличная недорогая вещь. Рекомендую всем.
The pendulum protection is a necessary thing. At the request of a friend , I bought it for him . It fit perfectly on his Honda Monkey. Now he is happy and enjoys using it. A great inexpensive thing. I recommend it to everyone.
----------------------------------------------------------
Protecting the pendulum is the right thing. At the request of a friend, I bought him. She perfectly approached his Honda Monkey. Now he is satisfied and rejoices in use. A great inexpensive thing. I recommend to all.
The PENDULUM Protection is A Necessary Thing. At the Request of a Friend, I Bouught it for Him. It Fit Perfectly on His Honda Monkey. Now he is happy and enjoys using it. A Great Inexpensive Thing. I Recomment it to EVERYONE.
Powered by Google Translator
View detail
I wonder if I need it to replace the carburetor on the CUB.
Since the replacement of the carburetor in the CUB forced us to replace the cook with an OEM fuel cock carburetor, we had a little choice and thought about it.
(1) 2 system Cook replacement
(2) No Cook with Tank set to Custom.
(3) No Cook with Tank as one line with After stuff.
(4) On/OffCook installation with one Tank system.
So, for now, we decided to just use Cook, which is cheap and doesn't cost a lot of money up front.
The mounting position was extended with Bracket and temporarily attached. It was usable as usual. Not bad for the price.
I just put it on, so I don't know how durable it is. Therefore, I gave it 1 star minus.
View detail
Fits: HONDA CUB, HONDA CUB, HONDA CUB, HONDA CUB
Required for Engine conversion
I purchased the Crankcase because I needed it after the engine was converted to a Large type.
I would have preferred a foldablefootpeg if I could have, but I had no choice.
Brake pedal is also a Quantity:Set, and is required in the Quantity:Set sales are Reasonable and appreciated.
Perhaps Pedal plating is more prone to rust than domestic plating, so maintenance will be more frequent.
View detail
Required for disassembly work
It would be nice to have when doing overhaul.
I have searched and found that many people reuse the Crankcase gasket, but I think it is better to smooth the Crankcase gasket with oil stone and replace the gasket to prevent oil leakage.
I studied the initial overhaul with New Engine.
View detail
Fits: HONDA MONKEY/GORILLA, DAX, CHALY, CUBetc. vehicles equipped with Horizontal TypeEngine, HONDA MONKEY, HONDA GORILLA, HONDA CHALY, HONDA CUB
This is faster and quicker than a poorly designed Engine.
I bought this once because the Engine I put together myself was sluggish no matter what I did.
I was wary of the Chinese Engine or ……, but it worked on the PON without any problems.
I don't know about durability etc. yet, but I didn't have any difficulties except for the wiring process on the car body side.
CUBOEM's SeesawShift Pedal can also be used normally.
However, as mentioned earlier, if the supplied Harness is not used, it is necessary to modify the generator/StarterWiring on the car body side to Bullet Terminal.
Especially with Cell motor Harness, you should buy a Bullet Terminal that is compatible with thicker Cable because you need to process the thicker Wiring for Starter on the Grounding Wire.
View detail
Fits: HONDA MONKEY, HONDA CHALY 50, HONDA DAX70, HONDA DAX, HONDA GORILLA, Others , Others 4-pole terminal RegulatorSpec. It can be widely used for vehicles.
Voltage increased slightly when running.
I bought this Regulator to review the ignition system because the MONKEY was malfunctioning. It was not the direct cause of the problem, but the original one was so old that it seemed to be worn out. After replacing it with this product, the voltage when driving went up a little. It is a little bit larger than the OEM product, but I had no problem installing it. View detail
Fits: HONDA DAX, HONDA CHALY
Tanaka Dax fender
Fitment is great and paint finish is beautiful. Fitted on a USA spec 1970 Honda CT70 that I am converting to Japanese spec. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Replacement for OEM grommets
I got these as a replacement bush for my new fenders. They fitted much firmer in the holes and are a excellent price vs oem. Super basic and easy to install. A+ View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA MONKEY
Great oil gauge
Help add to the final look of your motor with this machined oil dip stick. same length as the stock 50cc but adds a little bit of class to the overall look of the engine View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Chain Slider Protection
Rubber protection boot feels high quality. Installation was very easy and simple, the fitment isn't 100% perfect around the chain cover bolting position but can hardly notice id say 9.5/10. It will protect my swingarm from my chain perfectly. Packing was very nice and shipping times from Webike is always very fast! Thank you Webike! View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
Used in CUB110.
Installed at the time of oil change and also installed with bore up and it catches surprisingly well. View detail
It would be nice if there were!
It looks different when it is there!
I want it to be attached from the beginning.
View detail