Reviews
Size feeling, good effect
I used CRC over it instead of Engine oil. It soaks in quickly, so use it after pouring more oil. It is effective in removing Gasket marks, etc., and the size was just right. View detail
Easy to use with no deflection
When receiving, shifting, and lifting the Oil, there is no deflection and no problem in use.
However, cleaning the container after transferring the waste oil has become a hassle, so the number of times it has been used in recent years has decreased considerably.
View detail
For Sidecar
I use it for parking on hills and I am a little worried about parking brake alone so I use a stopper on the rear wheel just in case. it fits inside the glove box so when I stop the Sidecar, I just take it out and put it on the rear wheel.
If you have a Motorcycle with GEAR, you can put GEAR in it, but I would recommend it to Scooter owners.
View detail
Used for Clutch Cable!
Used for Clutch Cable of GB250 CLUBMAN.
I used an injector because the lubricant would fly out if injected as is. The GB250 CLUBMAN is not a heavy clutch, but it feels smoother. If you have an old car and the clutch is heavy, I recommend you to use Injector because the lubricant will spread to the whole Cable.
View detail
Good feeling
I'm glad I was able to reuse the OEMSeat, even though it's pointless to use the wasted hole, but since I'm removing the OEMRubber from the Seat, it would have been nice to be able to attach the Rubber to the wasted hole anyway. View detail
Convenient to have. Universal.
I saw the president of the Motorcycle shop using it for a little while and bought one myself.
It is useful for those who work on the ground, kneeling on the ground, or for storing small tools or removed parts.
The material is quite firm, so you can kneel or sit on it without any problem. I think it is useful to have one of these in your car not only at home in the garage, but also when you ride your motorcycle on a transporter such as Circuit or OffRoad course.
View detail
I was able to adjust it properly.
I have used it a total of three times on my medium and large motorcycles and have been able to adjust the oil level well each time without feeling any deterioration. (Purchased 1 year ago)
After use, I clean it lightly with Parts cleaner before storing it, and it has been used without any problems.
Cost-effectiveness is also Large, so a dedicated Tool is useful! (^^)
View detail
This is for the ZX-6R! (LOL)
Great for the ZX-6R!
Other cars have an oil filter right above the oil pan, which only serves to prevent oil from dripping into the exhaust pipe, but the ZX-6R has a filter in a strange place on the gearbox, and if not cured, it would be covered in oil. This product prevents Sauce.
It is as if it is for the ZX-6R.
After use, just a quick wipe with Parts Cleaner is all that is needed.
I can't let go of it.
View detail
Good for cleaning bikes
There's a lot to clean up in the garage. I don't have much experience with silicone accessories and am aware of the benefits and drawbacks and pretty much knew what I was doing when it came to ordering them. Pros: 1) I keep the water at 70 degrees and I can keep my hands in it. These gloves are much thicker than the latex kitchen gloves you can buy at the grocery store, and hot water is not a problem. 2) Tired of smelly sponges when washing parts with a sponge. With these gloves, you don't have to worry, they rinse and dry almost instantly. 3) No way the soft silicone cleaners on fingers and palms will scratch anything delicate. 4) It's really easy to clean and rinse the sink after washing the parts with these gloves. 5) Although easier to put on than latex or plastic gloves, I made it even easier by occasionally dusting the inside with unscented talc. 6)Long lasting and really durable View detail
That would be handy
Bracket used to stop Wiring, 1Quantity:Set contains 8 pieces.
I often use it for in-house Wiring of cars and I also use it for Motorcycle as you can see in the picture.
Thin Wiring is fine, but thick Wiring is not very suitable.
The clasp is made of soft gold, but this means that it is easy to open, and if you hold Wiring from below, it will eventually loosen.
If the Bracket is placed in a direction that does not require any force to open it, there should be no problem.
The adhesion of the double-sided tape is neither good nor bad.
If you apply it with a good surface preparation, it will hold up reasonably well.
It is a useful tool that is easy to use.
View detail
as if one were an innocent person
[How is it used?
Used to surface the clutch cover
Was the one you received as per Image?
Yes
How was your experience with it?
Nice Size and easy to use.
It can be easily crushed, so if you prefer a smaller size, you can use
Crush with a slotted screwdriveretc.
[Points to note]
Hit straight and parallel.
Be careful not to cut too much
View detail
I'd use it if I had it.
The items are useful if they exist, but they are useful.
When kneeling, you do not have to put your feet directly on the ground, and when sitting on the ground, it feels reasonably comfortable to fold it up and sit on it.
It is not a revolutionarily convenient Level, but I don't think you will feel lost if you buy it anyway.
View detail
![[PIT GEAR] Wheel Brush PG-270](https://img.webike-cdn.net/catalogue/images/7837/pg-270_01_TS.jpg)
It's Brush that falls down a lot!
I bought this product to wash for Vehicle for cars and Motorcycle Wheels. It is very useful and large enough to remove dirt from every corner of the vehicle. I bought a good product. I am satisfied with it. View detail
A must for Valve clearance
I purchased this for Valve clearance adjustment.
The part requiring Thickness Gauge is essential because it is not possible to measure it with other measuring tools such as Caliperetc.
Kowa Seiki is a company that I had not heard much about, but it is a very long-established tool manufacturer established in 1952, and it seems to be a company that manufactures not hand tools that we ordinary users use, but special tools and equipment that motorcycle and automobile factories install as equipment. It seems to be a company that manufactures not hand tools for us ordinary users, but special tools and equipment that are installed as equipment in motorcycle and automobile factories.
Unlike Dial gauge and Micro meter, Thickness Gauge does not deviate so much.
However, if rusting occurs, the thickness can easily change with rust, so only that point should be noted.
Since it is not a tool that is used so routinely, it is better to store it in Vinyl after use with a rust inhibitor, or if not available, a lubricant smeared all over it.
It has been about 10 years since I purchased it and it still remains rust-free.
View detail
Keep one and use it all the time.
I bought this for servicing the Cylinder area of my DT50.
It's for Gasket stripping.
Scraper can remove some of the surface, but it is better to use oil stone at the end for a firm surface to avoid unnecessary troublemakers.
Water-cooled engines, in particular, have a water jacket, so it is best to do this properly.
One unit can be used in various places such as Cylinder head, Cylinder, Exhaust manifold, Carburetor Joint, etc.
It is not something that decreases so much, so it is good to be able to use it for a long time as long as you don't drop it or something.
I bought 220 because I wasn't concerned about grain size at the time I bought it, but I think 400 would be fine for surface preparation.
View detail
![Female Cylinder [250cc]](https://img.webike-cdn.net/catalogue/14762/06130139_51b8a457cc4ea_TS.jpg)
(something) better to have
[How is it used?
Used for Fork oil change
Was the one you received as per Image?
Street Image
How was your experience with it?
Easy to use as it is a dedicated product.
The Measuring Cup sold at 100-yen stores has a wide spout that might overflow, so it would be less stressful to have a Measuring Cup.
[Points to note]
nothing special
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
It is better to have something like ForkSTAND so that you don't blunder the Oil that you have poured. Especially for those who work alone.
View detail
Well, it's Brass, so I don't blame you.
I purchased this product to remove rust from the exhaust pipes of the Exhaust System.
Compared to the cheap wooden Grip Brush sold at Home center and other places, the grip of the Gold attribute is thinner and easier to handle.
I used it on some stubborn rust, but it is a Brass Brush, so it was a little soft, and I felt that a Brush with a little more firmness would be better...but that's a matter of tool selection.
For heavy rust, I think Brush with a harder material would be better, but for light rust removal, I think it is sufficient.
View detail
Brush was quite firm.
[How is it used?
Motorcycle, I bought it to see if I could clean up the Emblem area of my car.
Was the one you received as per Image?
Brush is quite firm, although I thought it would be a little softer.
How was your experience with it?
As the name suggests, it is more of a Brush than a brush, so it takes courage to use it on painted surfaces.
I am glad I used it because it got rid of the dirt around the Emblem.
I don't know about the hairs, as I have only used them on Cowl so far, but they seemed less likely to fall out.
[Points to note]
It might scratch depending on the car body or paint color, so it might be better to try it on an inconspicuous place before using it.
I think it is for footwear and such in the first place.
You might want to write down what Brush is for or something. I was thinking of doing a tepla or something.
How did it compare to other products?
A wide variety of numbers and thicknesses are available and inexpensive.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
General Hose Band!
[How is it used?
I purchased this product as a FOR REPAIR because the Oil cooler hose band I use has rusted over time.
How was your experience with it?
The type is tightened with a slotted screwdriver, so it was difficult to apply Torque when tightening.
I think Phillips Screwdriver is easier to tighten.
How did it compare to other products?
It gives the impression of being cheap compared to other products, but since the use is for the Hose Band, there is no problem if it is considered a consumable product.
[Points to note]
Screw part is steel, so it rusts easily.
However, it is rare to find a Hose Band that is all Stainless Steel, even in other products, so this is not an option.
View detail
Easy to use
Cheap, but easy to use, and made it easy to change the Exhaust System. View detail