Reviews
ECU, Exhaust System and Quantity:Set
The Urethane construction seems to breathe air more easily. Install the filter with care, paying attention to the joints between the filter and the box. I removed the Diaphragm at the intake, fixed the lid fully open, removed EXUP, GET It is a waste if you don't change to full power spec. of WR. View detail
The effect is Large
KTM FREERIDE 350 (2015) I used the product for the following purposes. I was surprised at the sturdiness of the Frame and its weight when I received the product.
I thought it was probably aluminum (I believe it was marked "Aluminum"), but I don't think it has such specific gravity, and I think it is definitely steel under the black paint. I am a stickler for weight reduction, so I did not use this frame, but made it out of resin (I cut and pasted the one for 250R), which is perfectly fine for those who are not interested in weight reduction. However, the rubber cap on the top may not come off. I imagine it is supposed to be rotated and removed to insert the sponge, but it was firmly stuck and could not be rotated. I don't think it is possible for the smallest hole on the top of the sponge to pass through the rubber cap without removing it. The sponge is thick and solid, and I feel secure in its ability to remove dust. I have a friend's FR350, and he replaced the filter with this filter and removed the gold net at the Exhaust System outlet, and the response improved considerably (it will not pass inspection). I think it is better not to change the Exhaust System to pass the vehicle inspection, but to change only this filter except for the vehicle inspection. The filter structure of the Normal is good for the Sponge, but the filter frame is extremely narrow, so replacing it with this DT-1 is quite effective. However! More combustion means more heat generation, which is even more difficult in the 4st freeride where exhaust heat is naturally accumulated. Specifically, it is necessary to insulate the underside of the fuel tank, otherwise the gasoline will boil over. I have added a cooling fan, changed the exhaust system to AKRAPOVIC, and rewritten the map at OrangeShop. The value of changing to AXIS Rapo is that you can keep the NORMAL Exhaust System as it is, and it is also lighter.
View detail
No problem!
Installation is easy. I am satisfied with the quality and the longevity of the product. View detail
I appreciate the low price.
[How is it used?
I purchased this relatively Reasonable product because the AirCleanerElement on an old vehicle I inherited was falling apart.
How was your experience with it?
I thought it was a little small, but when I incorporated it into Case or Cage? I thought it was a little small, but when I incorporated it into a Case or Cage, it was ExactlySize. If you try to incorporate it roughly, it may be damaged, so it is better to work carefully.
How did it compare to other products?
I think the quality is the same as OEM. The service life depends on the owner's maintenance, so be sure to maintain it regularly.
[Points to note]
As mentioned above, since the size is smaller than the size of the original, there is a possibility that the sponge will break or the adhesive surface will peel off if the work is done carelessly.
Work carefully.
Other items that would be helpful
【Included Parts:presence or absence】.
It is a very simple product, containing nothing but Element.
[ITEMS TO BUY TOGETHER
Soak in AirCleanerElement Filter oil. (I used to use engine oil instead of filter oil. Engine oil has a lower viscosity than filter oil, so if you don't squeeze the engine oil tightly, you may get oil accumulation at the bottom of the air cleaner box...)
A dedicated Cleaner for cleaning when dirty might be even better.
[Opinions and requests to Manufacturer
For older vehicles, the OEM Air CleanerElement may no longer be available, depending on the Manufacturer.
Please continue to be a strong ally in such situations.
View detail
Reasonable and recommended.
It is the best choice now that there is no OEM product supply. View detail
Compatible with CRF250R 22MODEL
While other makers are out of stock!
Very helpful!
I love the colors, they look so pretty!
View detail
The part that touches the Box is perfect!
Since the part in contact with the air cleaner box is made of Neoprene, there is no need to apply high clay grease to the joint part.
Just blend the Oil for Air cleaner normally and it will stick perfectly.
I've used several of them, including a spare, and I can use them over and over again without them peeling off from Sponge's adhesive surface.
View detail
This product is a classic.
The Gold net on the frame of the OEM Air Filter is causing air resistance, so I changed the frame to one without the Gold net.
I chose this product of the Air Filter which doesn't burn because this Gold net plays a role that the Air Filter doesn't burn by BackFire from the Engine. (When OEMAir filter oil is used)
I chose this product because it is made of SpongeForm, which is a two-layered structure with excellent dustproof properties, and because the surface used for attaching the Filter Air Box is made of Neoprene, which is used for wet suits, etc., and I thought it would prevent dust, etc., from entering through the gaps.
I think it is because of the effect of changing the frame, but both acceleration and extension of the engine have become better.
I bought two to wash and use them alternately.
(At first I used the Air Filter Frame in the middle of the picture, but it was a little large and hard to fit, so I used the one on the Right Side that I found on Amazon.
View detail
Improved intake efficiency!
I installed it on HardEnduro, G650 XCOUNTRY, Enduro, KTM and Freeride. View detail
I am satisfied with the cost performance
The price is cheaper than other filters, and I don't think it's less powerful than the Normal filter It is not
The fabric is solid and I feel that it is durable
View detail
It is a good feeling.
Since the exhaust was changed,
Purchase this product in anticipation of the intake efficiency Up.
It contributed to intake efficiency Up with a good feeling.
Although I wash and use it many times, durability as a Filter is enough without being broken.
For Exactly Size also in OEM's Cage,
The point which can be used as it is without the need for any processing was also good.
View detail
Excellent dustproof property
Because genuine parts are 3229 yen, it is cheaper than the DT-1 filter. Since the genuine material is an ordinary sponge, this time I decided to use DT-1 with a two-layer structure. The shape looks like a lunch box, it is slightly larger than the one with a one-piece structure and it is clunky. Two types of materials are fastened with adhesive, and the contact surface with the air cleaner uses a material called neoprene. Wearing on the filter case was due to neoprene being inflexible or somewhat troublesome. The product is standard, it seems that oil application is not done. Bio air cleaner oil is required separately, but it will cost 3600 yen in 1 L. Bio air cleaner oil is flame retardant and back fire measures are being applied. For air cleaner oil, some people apply 2 - cycle oil, others apply 4 - cycle oil. Even if it enters the engine, there is no bad influence Oil is 2 cycle oil, but the oil of DT - 1 is flame retardant. It is surely strong and it will not enter the engine. I applied Yamaha's two cycle oil this time.. I will not run extensively enough to cause a back fire - - -. I think that the use feeling after wearing got better elongation of high rotation. I would like to confirm the durability from now.
View detail
Used for WR250F
In conformity it is WR 250, but exactly it is WR 250 F.
Air cleaner Box side is Neoprene Material and you can be in close contact !!.
View detail
WR250R DT - 1 AIR FILTERS Air Cleaner
NORMAL's FilterGuide (framework) The mounting.
Slightly tight, but no problem.
It seems that the intake efficiency has improved and Torque has increased.
I also expect durability.
View detail
There is nothing particularly outstanding
I do not have any special mention. This type of hand wears Iroiro Manufacturer, but there is not much difference in performance. I installed it on the WR 250 R, but I do not feel the difference with OEM in particular.
Fit feeling also OEM and Large no difference, if you buy OEM as spare, recommend DT-1 also price.
By the way, Maintenance uses WAKOS cleaning agent and Filter oil.
I chose it by Brand name and price. If you are not crispy Tune you will not feel the difference in Manufacturer.
View detail
To be sure by the product made from a Neoprene, the contact surface with an Air-cleaner VOX has stuck well.However, since elasticity of the Neoprene was bad, pains was taken over attachment. Compared with a pure Filter like a free Sponge, structu
To be sure by the product made from a Neoprene, the contact surface with an Air-cleaner VOX has stuck well.However, since elasticity of the Neoprene was bad, pains was taken over attachment.
Compared with a pure Filter like a free Sponge, structure is considerably solid.
Although a fire-resistant Filter oil is the appearance of boast of this Manufacturer, since severe usage that a backfire happens is not carried out, the surplus Engine oil is used.A bad condition in particular is not likely to occur but it is likely to be satisfactory.
View detail
Since the Filter was like tattering powder when overhauling the Air-filter VOX, when it searched confusedly, the splendid price used that it was unexpected.Since DT-1 was cheap No. 1 in it, it thought how kana ?, but structure is also solid and it is very
Since the Filter was like tattering powder when overhauling the Air-filter VOX, when it searched confusedly, the splendid price used that it was unexpected.Since DT-1 was cheap No. 1 in it, it thought how kana ?, but structure is also solid and it is very pleasing.
Satisfied.
View detail