Reviews
Along with Hose Replacement
The Hose was replaced along with it.
The Hose part was Red, so we installed Blue here.
The color is nice, but you have to be careful not to overtighten or lick the corners when tightening so that the color doesn't peel off.
View detail
It's safe.
Material:Because it is Stainless Steel, Material:I like that it's more secure than Aluminum and not too flashy. View detail
Can be used like OEM Product
Used for FrontIN side, OEM Product can be replaced. No problem with installation. View detail
A little disappointing
It is possible to install it like OEM. it is used for the front OUT side, the hole for the block fixation can only be installed in Small and SmallNut, and the use of Bolt is forsaken and fixed with Band, because Line comes to the center, I guess that Large hole cannot be processed. If there is a female screw on the frame side, there will be no problem. View detail
It's nice and black.
I changed the brake hose from Earls to Goodridge along with the hose.
Originally, it was a conventional Hose color, but I don't like to stand out too much, so I chose Black and it was the right choice.
View detail
Used when changing the routing
I bought this to change my original Brake hose routing from Direct to hPattern.
The product is solid and reliable as it is a famous manufacturer.
View detail
Straight
I thought the Banjo adapter would hit the Handlebar, so I bought this one. It did what I thought it would do. View detail
It's for GOODRIDGE.
In the column of the corresponding MODEL of the Page of the product of Active "Universal It only states.
WebBig's Page was the same way, and there was no mention of GOODRIDGE at all.
The product name of the actual item is "GOODRIDGE #3 Type S Handling which is called
So, shouldn't the name of the product Page also be listed as such? I think.
Other products are listed as being for GOODRIDGE, but only this product is not.
I left it for three weeks after I bought it, and by the time I figured it out, I'd already opened it.
I gave up on returning it.
View detail
Is good
To be honest, the price is high, but it makes sense when you see how well things are made. I use this one because I don't like twisting when I fix the hose, and the finish is beautiful. View detail
No problem
I bought this in case it fails. There is nothing wrong with the quality. View detail
Precisely built and satisfied
After changing the specs this time, I wanted to make the brake hose a couple of centimeters longer, so I turned it off.
It is more Reasonable than buying a new brake hose, and I'm happy with this PriceTag because I expect it to improve the performance in terms of function.
View detail
Let's make the most of it
If you've calculated your hose routing perfectly, you can use the Banjo bolt and Banjo Because it is possible to fasten Hose and Caliper by 1 Piece rather than using the adapter Refreshing in appearance and inexpensive to replace the hose
It is not possible to adjust the angle of the Hose out with the Banjo adapter in a subtle way It will not be possible, so would that be a little severe against the measurement? I'm sure you like it, but if you want to assume that it will be installed neatly anyway I think this one is better
View detail
It is a good product.
We are using ZrX400 in 1998. With the installation of Brembo caliper, this type was perfect.
Torque wrench is necessary. I mean, it's essential around Brake. When installing on Caliper side It is difficult to fasten unless Socket is Semi-deep socket or Deep socket.
Accuracy was very high, there were no leaks.
View detail
Large It is satisfactory!
I used this item to realize Brake around Refreshing.
Stable quality, fluffy.
The price is also cheap, and you can recommend it for those who are planning to exchange Brake hose from now on.
View detail
Fairly
Used in combination with APCaliper for Z2.
It can be handled the same way as OEM.
Normal hoseBracket usable.
The price is expensive, but it can not be helped ^ ^;
View detail
Is it all?
Bought twice, BALI appears in Receptacle screw neither, Screw does not enter as it is.
Is Earls such a thing like this ...
View detail
The point is defective
Earls remaining and combined with Fitting, but I can not fix it until the end Fitting can not be fixed.
Loupe expanded Large and it seems that Screw has not been cut to the end and the rest 1 / Screw is not cut in 3 laps.
With this I can not screw up to the end.
The last one / I shuffled Screw for 3 laps and finally it became possible to screw it to the end.
View detail
Inspected good
When trying to connect to Adridge of Goodridge, Screw does not mesh.
I felt it was funny though it was a conforming item but when I confirmed it by expanding it with Loupe, BALI remained in Sheng Large in the first part of female Screw.
After removing BALI with File, Cutter and Tweezers, Screw finally got to mesh..
It must be said that it is a miscellaneous finish.
View detail
Because it is a necessary part -
I found Crack when I exchange MASTER!
As Aluminum cracks, Stainless is good, it has been said before
Exactly! - - But this time, we exchanged only necessary parts.
Brake is the most important part so install and Maintenance must be exactly right!
View detail
It is not possible either
Purchased for Nisshin's Semi-radial master. I used it for installing to Direct because the Banjo attachment part of MASTER becomes an obstacle if it is an ordinary thing. It's Joint so it's not even possible or even impossible. Dare to say Material : It is light in Aluminum, but it is scary because it seems Nurutu will hang when Torque is hung.. People who are not confident of Torque management should be more secure with Torque wrench. View detail