Reviews
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ450F, YAMAHA YZ450FX, YAMAHA YZ250FX
Easy to apply Decal without YAMAHA's stamp
When applying Decal, OEMGuard has a raised YAMAHA imprint, and I bought it because I thought Decal would peel off easily.
It looks good, installs well, and is durable enough when used. No complaints, no excessive interference with the Fork outerTube, and the Decal was easy to put up.
View detail
ACERBIS to Spec. change
My FTR was wearing an ACERBIS Fender, but the shape of the triangle looked awkward when viewed from the front, which was bothersome.
I was planning to buy this product in April, but all the sites said it would arrive in October, so I waited for 6 months and finally bought it.
FTR does not have Up Fender originally, so I had to make it myself from Bracket, but I think it is not that difficult.
I was very satisfied with the natural forme when I put it on and looked at it from the front.
View detail
Awesome Product!
I often travel 3+ hours to a riding spot and usually have the bike strapped down, with the suspension compressed the whole ride there. It DOES keep you from reefing down on the fork springs so tightly and makes it more stable when hauling. Not to mention all the pressure blowing out your fork seals.This keeps that from happening. A must buy to keep your shocks healthy all season. Plastic there's no danger of scratching fork legs.round portion goes on the tire and square portion on the triple clamp. Plus, the material is A+. Great investment for the money.Good piece of hardware. Only complaint is it could be about 2cm longer. Lastly, it stays in place better than the chinese, which I have actually lost more than once. View detail
crf150rRear Fender
Willy's failure to bust it up and purchase Rear Fender.
Before I bought it, I was told that the screw holes might have to be modified since it is not an OEM product, but that was not the case at all!
It was a batch.
View detail
Large effect on Makeover
I replaced the CRF250L Large long Fender with this MOTARD Aero Fender. It is troublesome to measure and fit for drilling holes, but even that is not a problem. [Color] If you can Clear, replacement is easy.
I was worried about contact with the light cowl, but there was no problem at all. The front area looks lighter.
Minus the quality of the included LogoDecal, which is all black and tasteless, it is a cheap and good quality Part.
View detail
Fits: YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA WR450F, YAMAHA WR250F
Replacement of consumables with Custom WR250F
Used in WR250F
Guide and Quantity because the OEM has worn out to a pretty wadded up state.:I replaced them with a set. I changed both of them to Blue, it looks like Yamaha, Parenthesis is good!
After the replacement, I felt that the running noise decreased.
In my case, I was able to install it by removing the front sprocket and slipping it into the gap between the chain and the swing arm, but I heard that some car models can't be replaced without removing the swing arm from the frame, so I recommend that you check beforehand.
View detail
And as a backup!
[How is it used?
We will have a RenBarrel vehicle available when the race is held and for those who want to experience the off-road.
MinimotoHardEnduro has been in vogue lately, but one thing you can't avoid is Fender breakage.
Also, when you lend it out for a beginner's race, you'll find that it's a three-stage seat style when you get back.
The price is cheaper than OEM, and it is a hassle to look up the part number and put it in the Page of estimate every time, so I bought this one.
I think it is a good point of Other Brand Product that you can choose the color which is not in OEM such as White and Black.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Just remove the Seat and a few Bolts and you're good to go.
How was your experience with it?
It's outside the company, so it won't break easily.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you spray Silicon after every car wash, the gloss will last.
View detail
Same with OEMs!
A little cheaper than the OEMs, performance is the same as the OEMs!
The sticker is attached to the photo I took, but it is sold separately.
Also, there is a large gap between the Seat and the Seat. There is no problem with the accuracy of the product.
Unpacked, the plastic surface is glossy and clean, and no machining is required for installation. The Truth Pimping. can be done. With normal use, it has been uncracked for a year with every weekend of driving.
It is stored indoors but does not show any deterioration due to UV light.
The color also feels the same as the OEM and is no different than the OEM Front Fender.
View detail
I used it with Universal!
According to Base, I opened the hole and tried using it.
I also used the LED Blinker and it looks good Parenthesis? Haha? I like it and I use it.
View detail
It's stylish
I used it in Universal processing because I got a Wound on fall. It also serves as LED BlinkerBase. I finished it very well! View detail
I got it on LITTLE CUB (Ishimichi)
Michelin's PilotSTREET, Grip performance is great, but it is discovered that you can jump up the moisture on the road diagonally upward.
Therefore, such as after the rain will be muddy to the whole body.
So I tried installing this Fender forcibly. (For the installation, we cut off the rear part at once. )
Performance for Motocross is expected!
There is a thicker resin than CUB's Fender, it worked well for bouncing up.
It looks ticky "Black squid" It seems that it stuck (~_~;)
View detail
Product has no problem. KX80
Just a description of Shop is wrong and the Guide arrived without a Slider. Since it can not be helped it was not exchanged. Just pinch it and just remove it and exchange. By the way, the Slider that arrived later was Black, not Blue. View detail
Used when transporting Motocrosser
Similar items have come out cheaply from other Manufacturers, but when I saw what my friends are using, I felt that the structure was thin and the strength seemed to be unlikely, so I chose this item slightly expensive.
Building is solid and it seems to be strong.
View detail
KSR-2 was equipped.Although it is necessary to process a mounting hole a little with cutting a little backside, it fits like brand-name parts only by it.Although the KSR-2 pure Fender had short die length and its mud splashes were severe, it has improved
KSR-2 was equipped.Although it is necessary to process a mounting hole a little with cutting a little backside, it fits like brand-name parts only by it.Although the KSR-2 pure Fender had short die length and its mud splashes were severe, it has improved substantially by Fender change. View detail