Reviews
Parenthesis is good.
First of all, I was considering purchasing the OEM because of the cracks in the OEM. However, A-TECH's Bolt is embedded, so I don't think there will be any cracks due to aging deterioration. The OEM shape was ideal, but since it doesn't reach the maximum speed, and since it is installed, I think it is a good idea to use Parenthesis. I think Parenthesis is good. Also, it is lighter than OEM. However, the delivery time is 5 months &Gold price is too expensive. View detail
Precautions for installation
Please keep in mind that not only the A-TECH Fender Eliminator Kit but also most large exterior parts require some modification. Please keep in mind that not only the A-TECH Fender Eliminator Kit, but most large exterior parts require some modification.
Used on Ninja 250R.
The first challenge came with the installation of the BlinkerBush.
The diameter was smaller than the mounting area of the OEMBlinker, so it was difficult to insert the bushing. Grease must be applied. I installed it without grease, but it took a long time.
Then some Gap in Bolt hole.
The bolt included in the kit is smaller in diameter than the OEM bolt, so it can be installed without difficulty.
The third is the attached License Plate Light.
The Bullet Terminal Male was attached, so the OEM License Lamp's Wiring was smashed and installed.
The fourth is the mounting position of the License Plate.
Leutor or Drill is required for this area, so the hole needs to be widened.
Please be aware of the need for these hassles for those who aspire to Carbon.
View detail
RearTire cover (Mudguard)
The presence of Full carbon is overwhelming, I am satisfied with the functional design. View detail
Parts with a strong presence.
The OEM is a combination of several parts, but this is a one-part unit. Therefore, two ScrewOne Sides are not used.
Still, it is firmly fixed, so there is no obstacle.
Acceptable, but some Screw position adjustment is required.
Changing this one makes me want to go Carbon on everything else!
View detail
Attention to installation
It is so thin that it may break if you are not careful when installing it.
It will hit if it is mounted on an OEM Cover with the attached collar.
If you put a washer on it and Offset it, it will be fine.
View detail
?????
Installation is easy even for beginners. View detail
?????
Installation is easy even for beginners.
Used in combination with MRRACING's Number Seal Cowl
After all, it is aerodynamic and moves forward.
Better extension at high RPM range.
View detail
I put it up in reference to the Demonstration car.
120mmSize is attached to the Lower cowl with other sponsor Sticker
I have a few questions about it. I personally think it looks good on Black.
View detail
For Circuit
I bought this for Circuit.
Installation is easy as it is bolted to the place where the Maintenance Stand hangs. It would be better if it looked a little more stylish.
View detail
I put up a Sticker.
I installed it on my zrx1200ZrX1200 DAEG. I chose the Standard Type Fender for the design. I am very satisfied with the quality and precision of A-TECH. I also put a BLACK DIAMOND Sticker on it. I was a little bit worried about the Plastic Spacer when I installed it. View detail
Repurchase.
At the time of the first 25R, there were not many options and I purchased this one, which was also installed on KawasakiDemonstration vehicles.
It's been two years since then and all the companies have released their products, but I don't like the rounded design, so I'm going back to it after all lol.
View detail
The flag of Japan is my favorite.
It is a good Size to put next to Screen.
I had a hard time transferring it because I put it on when the temperature was low.
Usually, I think it can be applied immediately.
View detail
A-TECH Earplugs
At a quick glance, the texture is no different from TRI*ST*R and this Slider.
The packaging is insanely kind, protecting the Screw part with Tape to prevent Garbage, etc. from sticking to it.
StickerQuantity as a bonus:1 Set of 2pc.
Just in time for earplugs, man! (This product is HookSlider. Good kids don't copy it!)
View detail
Radiator core guard protection
I'm posting this because there were no impressions yet. The manual is not included, but it was easy to do. I think it is better to install from the oil cooler side first. The large size is very satisfactory. View detail
Stand hook slider
The gold and plastic parts are not crimped on one side, so it turns round and round, but it is still usable. View detail
Carbon is still good for Parenthesis.
Purchased this product to be able to handle the next time my Motorcycle was almost buried when parked on gravel.
I could have just put down a board, but I found this product anyway and bought it because of its coolness.
It is smaller in size than I imagined, but on the other hand, it is a convenient size for carrying around, so I am glad.
It has a hole at the end and can be carried like a Key Holder.
It worked well as Side Stand Support.
Included Parts:a ring that can be used as a Key Holder? The delivery time was indicated as 6 months, but it took about a month to arrive. It took about one month to receive it, although the delivery time was indicated as 6 months.
Carbon cool, so if you like the way it looks, buy it!
View detail
attachment
Installation was more difficult than expected. The shape is slightly different from OEM. View detail
Is this a guarantee of conformity?
What is the conformity guarantee for this product?
Made by A-TECH yzf -r1 4xv Fender Eliminator cannot be installed, but I was prepared to have to do some modification, but there are some parts (distortion, etc.) that cannot be modified due to the specifications other than those shown in the photos.
View detail
It was good
I am still using it at this point while Repairing it, but I wanted to buy it while I could get a new one!
The Motorcycle is currently in hibernation, so we will not be able to make an Impression etc. until after it is installed in the early spring.
The reason why I chose to have the effect is because I have chosen to use Twill Weave Carbon, and my mood is reflected in the Large portion of the effect. (Lol)
View detail
Quality not commensurate with price
To be honest, I can't say that the QUALITY is commensurate with the price.
The Screw holes do not match and the Bolt that comes with it is obviously too short.
The screw holes were not aligned, so I installed it forcibly, and the Crack was easily inserted.
Well, it is a handmade product, so accuracy may not be a problem, but I thought I would never buy A-TECH's parts again.
View detail