Reviews
Fits: SUZUKI DL1000 V-STROM1050XT, SUZUKI DL1000 V-STROM1050, SUZUKI GSX-8S
There is a mistake in the instruction manual
As others have mentioned, the parts for the connection to the tank are not installed, and I have to drill a hole in the back with a drill and screw it in place myself. The hole position is less difficult because the hole is drilled with a jig, but the problem is that the instruction manual specifies a drill diameter of 8.5mm, which does not match the diameter of the hole in the jig. Note that 8.0 is actually just right.
Even though it says 11-15L, the luggage capacity is small, so don't expect too much.
View detail
I bought it.
I bought it but haven't used it three times, only to go shopping for curry and dumplings. It is not a very large bag, so it can only hold about one or two days and nights. It is faster to bring Single Seat and replace it when you remove the Back. View detail
Price difference several times. Dozens of times more durable.
[How is it used?
? Continuous use from December 12, 2015 to as of April 13, 2024
100% outdoor use (no roof, with Motorcycle Cover)
Vehicles used:YZF-R25, YZF-R6
How was your experience with it?
The lock is as heavy as it looks, sturdy and secure.
Compared to YAMAHA's Steel links, the durability of the Sleeve is much higher.
I feel that the durability is improved because the sleeve is strong and the chain, which is the body part of the lock, is not exposed.
The rubber part of the product is in a bad shape after more than 8 years of use, but this does not bother us because the rubber accounts for only a small percentage of the product.
It feels like a pure chain covered with a sleeve, and while it can be moved freely enough to aim at the ground right next to where it was lifted, if you are not careful, it will unintentionally come into contact with the Wheel when you put it through it.
While it is heavy and secure, I am concerned about the load on the Spoke section, even though I know that it is better to float the Chain lock for security purposes.
Although the price is higher than the typical chain locks and locks sold at home centers, we would like to believe that the thickness and sturdiness of the locks are also higher, so the priority of being targeted is likely to be lower.
[Points to note]
I think there was a sentence like "easy to carry", but maybe something is wrong.
When loaded on a human being, it is so heavy that his shoulders and back might be destroyed in a second.
When loaded on the Motorcycle side, it is different from a chain lock like YAMAHA or GOJIRA, whose shape is fixed to some extent, and it is likely to move freely, so that the weight is usually on the One Side.
How did it compare to other products?
Y's Gear YL-02 Steel links lock (https://www.webike.net/sd/24118556/)
The Y's Gear is the same chain lock, but unlike this product, it does not bend freely, and it is easier to avoid spikes when putting it through the wheel.
The security of the key to open the door is better with Wave Key's Y's Gear.
The large size of the key to open the lock is smaller than the small size of this product, making it easier to carry.
The Sleeve has not so far experienced any powder clinging to the vehicle due to the raggedness of the Sleeve, and it certainly has the heft, security, and durability for the price. I'd like to use it for a little more peace of mind"than the average. I can recommend this product to such people.
View detail
![Breathable Waterproof Cover Ver2 [LL]](https://img.webike-cdn.net/catalogue/images/46183/image_01_TS.jpg)
Fits: APRILIA SL750750, BMW F800 R, BMW F800 S, BMW K1300 R, BMW K1300 S, BMW R nineT, BMW R100, BMW R1100, BMW R1150 R, BMW R1200 R, BMW R1200 RS, BMW S1000 R, BMW S1000 RR, DUCATI Clampura-Icon, DUCATI MULTISTRADA 1000DS 1200, DUCATI Monster series, HONDA 400 X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1300 SF
high quality
Motorcycle Cover is hung in two layers. This product is used on the inside because it seems to be a fabric that will not Wound the vehicle body. It seems to rub in high winds, which may affect the paint somewhat.
When I used Single Body before, bird droppings were difficult to remove because they got into the gaps between the fabrics.
I replace them when they start to powder. This time, the Large seems to be durable even after 2 years. The included Mirror cover is a good protection against powder.
The anti-slap strap tends to get caught in the gap between the brake pedal and the pedal, so depending on the car model, it may be better to be careful when removing it.
View detail
![Motorcycle Cover KIZUNA [Road Sport (with Cowling) 400-1400cc]](https://img.webike-cdn.net/catalogue/images/43748/kizuna_01_TS.jpg)
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Used on the outside Cover
The Motorcycle Cover is used in two layers and is used on the outside.
It is water-repellent and waterproof, so even bird droppings and pollen can be washed off.
I am not concerned about the flapping that other users have pointed out, as it seems to be sized just right by the Cover used inside.
It is durable enough to be replaced in two years.
View detail
Size selection with room to spare is recommended.
I had been using DEGNER's Porch, which is compatible with P.A.S. Mount, and purchased it to install it in a vertical position in combination with Meter and other equipment due to a change of vehicles.
Back provided for Camera [Color] It is a Clear window, but it also has a secondary use through which you can see the meters on the other side of the Porch.
The size of the iPhone I am using can fit in the Smallest Type of the same series, but this size was the best for me because it allows for more room when considering Cable's handling.
View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Ninja 1000SX
For Smartphone Holder installation
I bought it for Navigation and Smartphone Holder installation. View detail
For Side Back installation.
I tried to install it from the Left Side as a trial because I heard that it was designed for Side Back installation. The back is not visible when the back is installed, but it is solid and secure. View detail
DRC wheel tool anti-vibration/balancer option 10mm shaft set Product # F4287
Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery Thank you for the fast delivery View detail
Change your clothes according to your mood ^_^.
There are many colors to choose from, and you can change them according to your mood. View detail
Shift knob
I use it for Shift knobCover of my car, AXIS Ti mini-truck. View detail
Fits: HARLEY-DAVIDSON FLHXSE2, BMW K1300GT, BMW K1200GT, HARLEY-DAVIDSON FLHX, HARLEY-DAVIDSON FLHRC, HARLEY-DAVIDSON FLTRX, HARLEY-DAVIDSON FLSTSE2, HONDA NT700V, HONDA CB1300 SUPER TOURING, KAWASAKI 1400GTR (CONCOURS14), YAMAHA FJR1300, HARLEY-DAVIDSON FLHR, DUCATI Multistrada 1200, BMW R1100RT, BMW R1200C Montauk, BMW K75RT, BMW R1150RT, DUCATI Touring Edition, BMW R100GS Paris-Dakar, BMW R1200RT
unicar unicar Industries Rip stopMotorcycle CoverType SB
This is the fifth time I have purchased this product. I think it is a good product, very easy to handle and durable.
I will be seeking this product for as long as I ride my CBR1400.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA VIRAGO, YAMAHA YZF750SP, YAMAHA XV250, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA FZX750, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZR1000, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750
High sense of security
The fabric is firm and sturdy, so you don't have to worry even in Large rain. The weight is not as heavy as I thought it would be, but rather it is a good weight that is not likely to be easily blown away by the wind. View detail
Fits: KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Z650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION
Purchased to install Top case.
I have purchased a GIVI TRK52N TREKKER,
Carrier is now needed.
Carrier made by GIVI, because it is set to Fender Eliminator,
I can't use it, so I thought it was a thing that could be used with Fender EliminatorSpec,
OEM Carrier was the only choice.
View detail
Fits: Others Universal, HONDA CRF1100L Africa Twin, HONDA V-TWIN MAGNA, HONDA SHADOW400, HONDA SHADOW750, HONDA SHADOWCustom, HONDA Shadow slasher, HONDA SHADOWPHANTOM, HONDA STEED400, HONDA STEED600, HONDA VTX, YAMAHA Tenere700, YAMAHA NIKEN GT, YAMAHA BirdCity300, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR1100, YAMAHA DRUG STAR CLASSIC400, YAMAHA DRUG STAR CLASSIC1100, YAMAHA ROYALSTAR1300
Discreet Black is good
Purchased for Vf1100s. View detail
Not functioning.
It goes crazy quickly; about one second a week.
The Double-sided Tape that is attached to the Bracket must be removed to replace the battery.
Really useless. The great people who put out GOSign should try to use it properly!
View detail
Not usable, even COMPRyans in Manufacturer?
First of all, use iPhone for Navigation in Touring, Camera and other corruptions. (Mechanical anti-shake rather old iPhone) of
Purchased this product considering the possibility.
Image was purchased with the intention of being able to use Navigation on the iPhone instead of the Goo GRUMap and other devices.
First of all, as for the product packaging, etc., it is cheap with a Chinese flavor, the inner box with foil stamping but PeLePera, and the outer box is also difficult to understand the product description (This is true for HP as well.)
The quality of the product body is as follows:First of all, two LCD protective films are attached to the body.
The one with the Manufacturer logo is easily recognizable, but there is another one pasted below it.
Also, this QUALITY must be low.
It is very dusty in new condition and looks like a protective film on a smartphone that has been applied in a messy manner.
There are no instructions on how to install anti-theft brackets, etc. The Instruction Manual is almost completely silent, explaining only that you can use it by connecting ACC, Plus, and Earth.
So, what are my impressions of Body's use?
First, the screen size should be measured in advance.
The body size is almost the same as that of the iPhone 14, but like the old LCD Monitor, the bezel portion of the screen is large, so the display portion is much smaller than the body. (Design that feels old-fashioned)
It is also very thick. It is about the thickness of 2.3 cell phones stacked on top of each other, making it very bulky.
And when you use it. First, the Touch panel Response is
It's slow as shit.
It is useless. It's so bad that you can't operate it while driving, but it doesn't make you think about it.
I made the mistake of thinking it was going to be the same as an iPhone that costs about 150,000, but it's soooo bad.
And even if I operate it with my bare hands, it taps on different parts of the board.
Cheesy electronic sounds and Manufacturer logo displayed when powered on
No, you are not such a proud Manufacturer, Small one hour to see if you can't turn it off.
The most discouraging thing about this is that it doesn't connect to my phone very well.
And, due to the radio wave law, the connection cannot be established for 60 seconds after startup.
Now, do you leave your motorcycle in place for 60 seconds after starting the engine each time?
Is your neighborhood Large sturdy?
Or do I leave the Headlight on for 60 seconds without applying Engine?
Is BatteryLarge sturdy?
I contacted the Manufacturer about this.
It's on the website. (W52 indoor /W56 outdoor only; it does not say that it cannot be used for 60 seconds. Are you telling me to check the radio laws myself?)
If you make a W52, you don't have to wait. But it's illegal, so use your own judgment and do something illegal.
Huh, the Manufacturer recommends illegal activities to the User?
I bought it because it was reasonably priced and had just been released.
The website and product descriptions are appropriate. Packaging, quality control, and after sales are all appropriate and pokey.
This is the first time I have purchased from a Manufacturer, but I would not recommend a Manufacturer that is not well-known.
It's been a long time since I've had a chance to make an impression since the sale of the property was successfully finalized.
I wish that one less person would buy this product.
View detail
Fits: HONDA DIOSR, HONDA DIO, HONDA TACT BASIC, HONDA ZOOMER, HONDA SMART・DIO Z4, HONDA SMART・DIO, HONDA STAND-UP TACT, HONDA SUPER DIOZX, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA GORILLA, HONDA CREA SCOOPY, HONDA QR50, HONDA BAJA, HONDA TODAY, HONDA TODAY DELUXE, HONDA CUB PRESS, HONDA MONKEY
No Impossible part
There is no part that is not possible as a Body Cover. View detail
It's durable & textured.
I have used it extensively for touring and camping and it has not a scratch on it! The hooks are well made and easy to hang. The paint is high quality and does not rust or peel. The paint quality is high and does not rust or peel. It is an attractive part and I would recommend it to anyone! View detail
Fits: SUZUKI GSX250R, HONDA CB1300SUPER FOUR, YAMAHA YZF-R25, SUZUKI GSX250R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER FOUR SP, HONDA CBR250RR ABS 2BK-MC51, HONDA CB650R, HONDA CBR650R, HONDA NC750X, HONDA CB1300SUPER BOLD'OR SP, SUZUKI GSX-R125, HONDA CB1000R, Others , SUZUKI GSX1300 HAYABUSA, YAMAHA MT-07, YAMAHA YZF-R3, KTM DUKE250, KTM 390 DUKE, KAWASAKI NINJA 250
Almost satisfied
Purchased mainly for day-touring.
It is also highly rated because it looks Refreshing and has a Single seat cowl-like appearance.
As for the capacity, I would like to put in a Wallet/Plastic bottle. (500ml) I am satisfied because the Fanny pack (which holds the Wallet) just fit.
I don't ride in the rain, and if I want to put rain gear in the bag, I use a Seat bag one size larger, so no problem.
One point of concern is the handle. The cover of the handle is a bit thick and heavy, so it sticks out from the Rear Sets in my vehicle.
I have to take the cover off to avoid this problem.
View detail