Reviews
Fits: HONDA MONKEY, HONDA MONKEY, HONDA Super Cub 50, HONDA SUPER CUB70, HONDA CHALY 50, HONDA DAX
Very best product at a very low price. ??
CUB was able to easily raise the Seat and open the fueling Cap. I like the design and size Polished. I am very happy with the design and size Polished. View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-S1000F, SUZUKI katana, SUZUKI DL1000 V-STROM1050, SUZUKI R125-G, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI DL1000 V-STROM650XT, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI DL1000 V-STROM1050XT, SUZUKI DL1000 V-STROM650
Simple and good.
While many similar products in CHINA are quite flashy, this product is simple and easy to work with, and I am satisfied with the finished product.
I am very satisfied with the original effectiveness of the product.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25
Quintessential OEM
I bought it to hide scratches and to prevent future scratches.
This is a quintessential OEM Product.
It can be attached perfectly and looks great.
View detail
I am generally satisfied, but I would like to have a larger size.
I like the affordable price and the Grip feel and have purchased several times now.
The size is one size, so depending on the vehicle, one piece may not be enough.
View detail
Those who understand can understand Rapid.
Tank end a little. (about 8mm) The Level goes up and becomes the same as the Level under Seat, and is Refreshing.
Those who understand will understand.
In addition, for those who remove the tank, the tank has been raised slightly, making the removal work easier.
I recommend it because it is easy to install and inexpensive.
View detail
Fits: BMW R nineT Scrambler, BMW R nineT Racer, BMW R nineT Pure, BMW R nineT
I think it needs to be improved!
After touring (about 5-6 hours), when I was wiping it dry, I found the pad peeling off, which seems to be due to the adhesive sticking to the tank and the peeling between the pad and the adhesive. View detail
cheap but quite good
I use Kijima tank pad on my Honda VFR800 VTEC gen 6 2003. Kijima tank pad is a bit cheap, small size but quite good. I think it fits very well. View detail
Fits: HONDA , HONDA CB500X, HONDA CBR500R, HONDA Rebel1100 DCT, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CBR650R, HONDA CBR400R, HONDA CB650R, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB1000R, HONDA 400X, HONDA Rebel1100 T, HONDA Rebel1100, HONDA CBR650R, HONDA CB650R
Exclusive product and perfect for Size
The double-sided tape is in good condition and applies cleanly.
The new condition is clean, but I have a feeling that the soft urethane?material will discolor white after long-term use.
View detail
f900xr Fits
Cover the part that takes Rider and Contact. The texture of the rubber is good, and the adhesive tape, which can be reapplied, is also very good. The size is a bit large, so I prefer it that way. It is good that it does not get scratched. View detail
Prices are high for dedicated products.
[How is it used?
I used it for about 3 months. I am satisfied with the expected Grip effect.
Was the one you received as per Image?
I was torn between the EVO shape and the PRO shape, but I decided on the PRO one based on other people's impressions. I wanted to make the bumps less noticeable, and I also wanted to get the color of the car body. [Color] I chose Clear. A photo of the entire car body is attached for reference.
Was the installation difficult?
There may be some difficulty depending on the Tank shape of the vehicle. In my case, the tank shape has no gouges and is straightforward, so it was relatively easy. After temporarily attaching with paper tape, I peeled off half of the backing paper from the edge and patiently attached the tape. The first one was just a little off, but the second one seemed to grab the hang. The air bubbles definitely get in, but I think you can make it better by applying it little by little and getting used to it over and over again with your hands. (It will gap, so you have to pull it in the right direction little by little! Also, a rubber roller would be nice).
What is your experience and what is your disappointment?
Knee grip is easy. I am satisfied on that point, but there are two minus points:1. it seems to be a little aggressive on Jeans, and the fabric is a little fuzzy; 2. the price is too high; and 3.
A word to the manufacturer.
Please give me a few canned Sizes that I can use in Universal. Cut yourself.
View detail
Tank Protection
Film seems to be thick and protective.
The tip of the Seat is OK if you press it against the R of the Tank while using a hot gun.
Finish by stretching with a spatula in a radial pattern so that there are no air or detergent residues.
The film may look white immediately after pasting, but after one night, it settles down and becomes transparent.
View detail
Impressions at Corner
In NORMAL condition, it was difficult to hold the tank, but after attaching this product, the tank was held firmly and the vehicle was able to run in a stable manner. The price was reasonable and I was satisfied with the Large size. View detail
Best protection pads
Install new production pads on my bike. The material is with highest quality. It fits well and looks good on my bike. Highly recommend for others thank. View detail
![Tank Pad Tank Grips [Evolution]](https://img.webike-cdn.net/catalogue/images/38018/Kawasaki-Z1000-2014-2016-Black-Evo_TS.jpg)
Not slippery at all.
I would recommend this one, although the tank is slippery so I couldn't get a knee grip at all and was feeling a little stressed,
As soon as I put this product on, it stopped as if it was stuck and I was able to get a good knee grip! I was able to grip my knees with this product.
It is recommended because it stabilizes the driving.
View detail
OEMTank Pad
It is an ordinary Tank Pad.
It was easy to install and stick straight on.
View detail
OEMParts
The knee bites firmly when Cornering!
OEM only, no deterioration even after 2 years of outdoor storage
View detail
Fits: HONDA , HONDA CB500X, HONDA CBR500R, HONDA Rebel1100 DCT, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CBR650R, HONDA CBR400R, HONDA CB650R, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB1000R, HONDA 400X, HONDA Rebel1100 T, HONDA Rebel1100, HONDA CBR650R, HONDA CB650R
It was easy to put up.
It was inexpensive and easily applied by a beginner in a few minutes.
Before applying the adhesive, the Motorcycle must be properly secured so that it will not move.
The area to be covered should be cleaned properly.
Cushion is also in its own right.
View detail
OEM
I used masking tape to measure the position of the tape and apply it precisely. Silicon-off degreasing is also necessary. It looks cool now. View detail
3rd same thing
I am riding the Honda CB1100EX for the 3rd time.
This is a knee grip pad that I always buy and use every time I ride.
First of all, the design is clean and the colors are toned down.
It goes well with most bikes.
It provides a very stable knee grip when going around curves. -------------------------------------------------- -------- Honda CB1100EX is only the third generation It is a niglip pad that you must buy every time you ride. First, the design is clean and the color is down down It goes well with some bikes. Very stable Ngrip is caught when you go around the curve. Powered by Google Translator
View detail
Fits: Others , HONDA GORILLA, HONDA BENLY50CD90, HONDA BENLY50CD50, HONDA APE 50, HONDA APE 100, HONDA BENLY50CD90, HONDA MONKEY125, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125, YAMAHA XSR125
Very effective for knee grip. Good!!
The wide range makes the knee grip much more comfortable and firm. Unlike other knee grip pads, this product contains high-quality 3M tape, so you don't have to worry about it falling off.
Additionally, this product has a high-quality finish, making it much more luxurious than other knee grip pads. I highly recommend it. -------------------------------------------------- -------- The wide range makes it easier to make Ngrip much easier and harder, and this product has a high -end 3m tape different unlike Ta Niglip Pad, so you don't have to worry about falling. In addition, this product is much more luxurious than other companies' Nigip pads with a high-end finish. Powered by Google Translator
View detail