Reviews
Change the position of the Quad lock
I like that it is made of Aluminum, looks sturdy and Simple! View detail
Difficult to install
The angle between the handlebar fixing and the bar makes Gap installation difficult. View detail
Easy to use
It is good to be able to fix it firmly with One-touch.
I think the price is reasonable.
View detail
After all, it is a place where a charging cord is not necessary. 0
I had been using the company's Holder without Qi, and I was satisfied with the Large Change Hold feeling and the vibration prevention, which mitigates the effects of vibration on the phone. After all, detaching and attaching with one hand is very convenient. This time, I replaced it with this one because of the hassle of the charging cable and the fact that it stops charging in the middle of the charging process. Just by eliminating the cord, it is considerably stress-less. I am using it with USB, but it would be better if the cable that takes it from the power supply could be removed. (The hold feeling is as good as ever, but it is sometimes difficult to operate the smartphone screen corner due to the frame, so in that sense, one star is reduced. However, it is an excellent product. View detail
Instead of RAM MOUNTS
I decided to use RAM MOUNTS for another car model, so I looked into buying another RAM MOUNTS.
The price had gone up quite a bit and I was Biggly. So I bought it instead.
The GSX-S750 originally had a large diameter handlebar, but we were able to accommodate it with a rubber seal.
Release is also a Quantity:Set is easy, fast and reliable and I am satisfied.
Kaedear, you've been coming on strong lately. I have high expectations for the future.
View detail
Dantes easy to use inexpensive smartphone Mount.
I have this on my ZrX1200 DAEG. I have used other Manufacturer's Smartphone Mounts, but I think this one is the easiest to use. It locks by itself when I press the phone against it and the release method is easy to understand, so I even think I will replace it with this one when the other Manufacturer's Phone Mount breaks. I am satisfied with the price and functionality. View detail
Freedom from unplugging the charging cord!
[How is it used?
I had been using RamMount as a Smartphone Holder and had no complaints about the body itself, but the only thing that I always found troublesome was connecting the cord for charging.
Since I use my cell phone as a navigation device, the battery drains quickly, so I always have to charge it while riding. Therefore, I have to unplug and plug the cord every time I leave the motorcycle and every time I ride again.
Was the one you received as per Image?
In the picture, each of the parts looked large and bulky, and the image seemed to stand out, but the actual product is a very ordinary Smartphone Holder.
Was the installation difficult?
The act of removing the Cowl and tinkering with the electrical system was too much of a hurdle for an amateur riding specialist, so I asked Timing to install it with me at Motorcycle Shop, where I would install a driver's license.
How was your experience with it?
It is only a small step, but it is much easier now that I don't have to unplug and plug the cord! The charging speed seems to be the same as from the cord.
Manufacturer's description. The Slide arm on the top can be fixed by simply pushing up on the phone, and can be removed by simply pushing up. Smoothly attach and detach the mobile holder with one hand." I have been using two hands because it takes a lot of strength (perhaps men can easily take it on and off with one hand). (Men may be able to easily remove it with one hand.) Since it is held firmly, I am not worried about it falling off while driving.
Vibration absorption is also said to be Standard Equipment (I couldn't really tell when I ran with it), and although I have never been particularly concerned about vibration with the Ninja, I'm relieved to know that it's there.
[Included Parts:were they on?
The screw for attaching the parts connecting the body and the mounting part was not of a common type, but had a special tool.
[Was there anything that disappointed you?
The part of the claw that holds the phone Body is Red color. It may be good for those who choose Red as a color scheme, but it is not my favorite color and I wanted it to be Black. I want to repaint it.
View detail
Used with KDR-M11C
It came with the KDR-M11C so I didn't have to buy it.
I will keep it as a spare.
View detail
Mounted on BWS125
Installed on BWS125.
I use it on my iPhone 13ProMax.
It is a good product for normal use.
View detail
Camera installation of the DRA RECORDING system
I purchased DriveRecorder's Camera for installation.
M6 bolt holes are convenient.
View detail
Used with KDR-M11C
Installed on KDR-M11C.
There are three different hardnesses to choose from. For the time being, we will use the Middle, which was included from the beginning.
I don't know how effective it is, but I put it on as a precaution because I don't want my phone to break.
View detail
Opening Ritual
It is quite good.
The RamMount you are looking for in the Mount at 1InchBall is
I can't deny that it already feels old-fashioned nowadays, like dropping your phone.
Ka Edia was selected.
CaEdia has many different types in terms of shape, but other models are not so good.
It didn't feel right and I chose this one.
View detail
Intermediate Mount Crime Prevention
Here are some pictures from unpacking to assembly. It was Large odd because the cat was in the way.
There are two types of intermediate mounts:hand-tightened and Wrench security, but KaEdiaBody has a conversion circuit.
I chose security because I had it and it would be a painful expense if it was pulled out.
As explained in the photo, the outside of the wrench and the groove of the wrench are turned with a special Wrench.
The part was of a structure that rotated idly and could not be turned when it was turned to steal it.
I didn't really understand the structure until I opened it.
Our Motorcycle was unified with SP CONNECTO, but the new ContiGT650 is a newcomer.
I could not install it with Separate handle and chose this one via 1 inchBall.
The ball also comes in 15mm, 17mm, and 25.4mm (1 inch), so I was a bit confused at first.
Body side 1 inchBall is a type that is attached to the Top Bridge, Hachioji Re-ARAI's.
The Option was lightly over $20,000 for this alone with the Original product.
View detail
With Smartphone Holder
I bought it because I heard that the iPhone Camera is prone to breakage due to vibrations from the Motorcycle. I am not sure how well it works since I have only driven about 100 km after installing it. View detail
I just bought it because I was curious. It's pretty big!
[How is it used?
I bought this to mount on my PCX125. I was fine with the Coaxial Type since I use KaEdia's Smartphone Mount, but I bought the Separate type anyway so that I could use it elsewhere.
Was the one you received as per Image?
The size is larger than I expected. The quality of the material is also quite good, as the price is a little high. The material seems not to be easily broken in case of an accident. I think the texture is quite good. The only thing is that it is so big that you can't see the meter depending on where you install it.
How was your experience with it?
I think it will help a little with the problem of not being able to see the phone due to the reflection of the sun during the day, but I don't know about the sun visor preventing the phone from getting too hot since it's still cold. I think it is good because it prevents the wind from hitting the phone a little bit.
[Points to note]
The angle of installation is difficult; it is difficult to install the separate type unless there is a lot of room around the handlebar.
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
I bought a new Motorcycle.
Since it is both a Smartphone Holder and a Charger, there is no need to install a USB power supply, and the area around the Handlebar is clean. You can put your smartphone in the Quantity:It can be recharged by simply setting the battery, so there is no need to worry about running out of charge. It can be turned off when you don't want to charge it, which is very good. View detail
Easy to install on REBEL250 and easy to install and remove your phone on a daily basis!
[How is it used?
I'm holding my phone in place to charge it and view the map.
I use it to listen to music on Income connected via Bluetooth.
Considering the battery consumption, it is very convenient to use it while charging!
Was the one you received as per Image?
Yes
Was the installation difficult?
It was easy.
Attached Material:AluminumBar mounts on the Handlebar.
I'm glad I was able to install it with a clean look.
How was your experience with it?
It's powered from DAYTONA's D-UNIT, so it's fast enough to charge with Qi.
USB-C to charge other devices
Also, if you switch on the Switch, you can connect the Mobile Battery to the same USB-C port and it will charge with Qi!
Can be used without being connected to Battery
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
Not particularly.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
When I purchased the product, I was not sure which type of USB port it was, so I thought it would be better to have an easy-to-understand explanation of that.
(One USB-C for both input and output, etc.)
View detail
I had no choice but to buy it…
I purchased this product in order to attach the company's Smartphone Holder (KDR-M14C). The reason is that the Mirror mount that comes with the Smartphone HolderBody has a plastic plastic "Thickness The included parts:were unbelievably thick (about 4mm/see image) and could not be installed after all. I wonder if everyone can install Mirror with this. Even if it is made thicker to prevent vibration, it is too thick.
I bought this product separately, but it shakes a lot when idling. The product of another manufacturer used in the previous vehicle was not so bad. I think this depends on the vehicle (idling vibration), so I can't say for sure. That is a little bit Minus. I am satisfied with the rest, and I think that if I adjust the angle of the bracket and the bar well, I can adjust the position of the Large body to my liking.
View detail
Clamp Bar
The Clamp Bar I purchased this time is well made for the price, and I think the cost performance is high. View detail
KaEdiaQuickHold
It is very easy to use and very useful. It is several times better than my previous Type. The price is also reasonable. View detail