Reviews
It is fast and quite stable.
When I ordered this product, it was on order, so I was prepared for a long delivery time, but luckily it was in stock and I received it immediately. The installation was very easy, just remove the cover from the end of the tank, tighten it with the bolt that comes with it, and install the other end in the lower part of the top bridge of the front fork.
OHLINS was recommended for the damper, but Universal's damper also works well.
At first, the handlebar does not move immediately when turning it, which can be a bit disconcerting, but once you get used to it, there is no problem at all.
I'm glad I put it on
View detail
for Race, so ABS removal is required, Brake switch is not available for OEM use.
As the Title says. Take care!
I checked with WoodStock and they said it hasn't changed since the 2016 model as a thing.
The things are good, temporarily assembled, and there are many adjustments that can be made.
WoodStock's response was also a good one!
View detail
Design is good
Just fit for PRO-GRESS2Exclusive Design. I think it is a very carefully made product. I bought this product this time because I used to install PRO-GRESS with Magic tape and it was not cool. There are two types of products depending on the installation position, so you will regret later if you do not decide the installation position properly. I wish the Bolt and Cap Nut were black to match the product. View detail
The build and installation is top notch.
The product is well made. The price is a bit steep, but I am glad I installed this product. View detail
of high quality
I wanted a Silver footpeg but could not find one, so I went with this one.
Back volume may be low, but it is just enough for me in Touring Main.
I was able to install it myself, which I am not used to doing, but there are many things to check, so it is safer to ask for help if you are unsure.
The installation was perfect, as it is dedicated to the model of the car.
The delivery time is not that long, but it is not something that can be produced in large numbers, so there is no way around it.
I am glad that I can order only repair parts.
It is a good idea.
View detail
It is as good as I expected. It would have been better if the delivery date had been earlier.
I was concerned that the Left Side footpeg is offset slightly more to the outside than the Right Side, but I guess that can't be helped since the ROD has increased due to the reverse change support. View detail
Fits: KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX SE+, KAWASAKI Ninja H2 SX SE+
I chose it completely based on preference.
Before the installation, I was worried about a lot of things, but it turned out to be a blessing in disguise!
The position settled at 20mm BACK/30mm UP.
The price is higher, but I was excited because I liked the Titaniumium Bolt, which is available in a choice of colors!
View detail
Fits: KAWASAKI ZEPHYR750 [Zephyr]., KAWASAKI ZEPHYR750 [Zephyr].
Rear Sets
I just installed Rear Sets for my friend's Motorcycle. I bought the product I liked because every manufacturer has a long delivery time.
The fact that we are in the same city, Hiroshima, is also a reason for purchasing this product.
The others were installed without any problem and I am satisfied with the quality.
View detail
I wonder if the parts are correct.
Cannot be installed.
After replacing the change arm, the ShiftFork part was turned over, but it interfered with the frame and could not be installed.
When I checked the 6R, it arrived a week later because they forgot to put in the parts.
View detail
Mounting complete
Mounting complete
After installation, I am not good at FeeRing, which is not good for Downshift due to the soft Shift touch and not good for Downshift, probably because of the AutoBlipper support.
The Parts are innocent, but in terms of cost performance...
The texture is good
View detail
The texture is great.
The texture is great.
I'm glad I chose this over YOSHIMURA's Meter Bracket.
View detail
Fitting outstanding!
I purchased this product to install on my CB400FOUR.
・YOSHIMURA PRO-GRESS2Multi-temp meter
Fitting is unquestionably good for an exclusive product ◎
The texture is great and it fits Refreshing!
View detail
Fits: KAWASAKI ZEPHYR1100 [Zephyr]., KAWASAKI ZEPHYR1100 [Zephyr].
whatever the circumstances may be
I ordered Black, but the underlying Silver came out within a week after installation. Is this the kind of product? I want it replaced. View detail
Used for YOSHIMURAPRO-GRESS2 installation
When I was searching for a good bracket to parenthesis when installing YOSHIMURAPRO-GRESS2, I found it and bought it.
Usage:Touring
Image of what I received:Good finish and good impression.
Installation difficulty:Beginner
Feel:Design and finish are both excellent.
Included Parts:All OK,
Disappointments:None
View detail
Woodstock mount
This alumymount for my Yoshimura gauge is perfect. Great quality. Awesome quality and super fast shipping. WeBike always has the best products. View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI KATANA
A beautifully finished product
When I took it out of the packaging and held it in my hand, I was struck by one word:beautiful.
Pre-assembled and very easy to install.
It was the first time to install the product, but felt that it was constructed for easy installation.
I bought it to prevent the footpeg from hitting my calf.
Driving has become very comfortable with very tightly compared to OEM.
It would also be nice to eliminate the tightness of the toes on the tip of the OEMfootpeg.
Above all, the Manufacturer was very responsive and very helpful in changing the ROD to the current MODEL.
Very Recommendation.
View detail
Zh2 rearset
Rearset fits my kawasaki zh2 2021. More comfortable on the riding position and alot of positioning for the foot peg. Highly recommended View detail
Fits: KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR KRT, KAWASAKI Ninja ZX-4RR 40th
Best footpeg
Standard step, purchase of a collapsible Pedal.
Accuracy, feeRing, cutting, and footpeg are all satisfactory.
I was disappointed when I installed one from another Manufacturer.
I found it wonderful.
View detail
Satisfied with high rigidity and operability
I replaced the OEM footpeg before I snapped it.
I wanted something with a solid heel plate, so this was perfect for me.
The rigidity and precision of the product was perfect, and there was no rattling whatsoever.
As for the operability, in the OEM state, it had the limp shift feeling characteristic of automatic shifter, but in the
The Shift Pedal bearing can be adjusted in three different positions for the Shift rod on the lower side.
You can change the lever ratio (adjust the amount of stroke when SHIFT UP/DOWN) to get a tighter shift operation feeling.
Thanks to this, GEAR is now ScauperScauper and I can shift change with confidence even before Corner.
There are five positions to choose from, and I found the 15mm Back/35mm Up position to be the most comfortable. I found the 15mm Back/35mm Up position to be the most comfortable for me, as it allows me to ride naturally and is very easy to control. I don't know if it's better or worse because I didn't compare it with other products.
I was able to experience the ease of operation that is fed back from road races such as the All Japan Championships.
A parts list is also enclosed, so in the event of a fall or injury, you can order repair parts from just one bolt.
View detail
YOSHIMURATemp meter stay
It fits in nicely with the look of the house.
I'm satisfied!
View detail