Reviews
It's not bad.
The meter valve is only attached to the upper half, and there is no Wiring Cover, Bullet Terminal, etc., so you need to do additional processing by yourself.
The Meter is a little gap because it is Other Brand Product, and the Mount has not been processed much. (The corners have been removed to some extent) There is a point that there is a worry that the Fork will be scratched, etc., but I think that there is no immediate problem in use.
By the way, the length is not enough when the ShortCable of the company is used, and the degree of freedom of the mount falls greatly. If you don't lubricate it and do maintenance periodically, the wire inside may break and the meter may not move. So, if you can, you should choose a longer cable.
It's not very cosy, but there are almost no other options, so if you can afford it, you might as well give it a try.
Also, if you turn the Handlebar off, you can't see it behind the Tank. If you want to pass the inspection, you have to move the Mount up or hope the local inspector is loose.
View detail
It's not worth $10,000.
Honestly, it's not worth the price at all.
The Wire connection was broken about a week after installation and there is no way to repair it. To be precise, the mechanism inside seems to have broken rather than the connection part, and the input from Wire cannot be reflected in Meter. (The needle is not moving.) It had become
Besides malfunction, the first thing to do is to check the Meter valve (Meter Lighting) But the light is so low that you can't see it at all at night.
And because Wiring is thin, and there is no Cover etc., there is a danger of disconnection and Short depending on the handling. However, there was not such a thing as far as I used it for one week. I think that it is better to reinforce it by wrapping the vinyte from the top. Also, you should prepare Bullet Terminal etc. by yourself because it doesn't come with it.
Mount itself was good. When you install it, the gap opens about 5mm, but in order to fix it, it is necessary, so let's accept it indulgently. And Fork and Mount are both gold, R processing has not been done much, so if you do not want to get scratches on the fork, I think it is better to put something between.
View detail
It's like, "Mmm-hmm. (^_^;)
[How is it used?
We're just getting started, but that's normal.
Was the one you received as per Image?
That's right.
Was the installation difficult?
I'll just replace it with an existing one.
But I think it's better to take a picture at the beginning and in the middle to avoid mistakes later on.
How was your experience with it?
Normal ….
[Included Parts:were they on?
Lens only, no other accessories!
There is no instruction manual.
[Was there anything that disappointed you?
No, it's Lens.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Stylish contraption
Good quality product, bolt-on, does not require complex preparation before painting. There is enough space between the wheel and the fender, and the baud is more high-profile rubber. Maybe even fit a 19 "wheel. Protects against dirt much better than the original. Good quality product, bolt-on, does not require complicated preparation before painting. There is enough space between the wheel and the fender, and the baud is more high-profile rubber. It might even fit a 19-inch wheel. Protects against dirt much better than the original. translated by Google Translator View detail
The frame is distorted.
The frame was distorted.
When I was looking at cheap sunglasses in Don Quijote, I found that an identical Frame with a different Manufacturer's logo was on sale for only 2,000 yen
Looks like they're just giving a cheap Sunglasses a brand name
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
A product for a slightly different purpose, but it's an itchy one
I have a CHIC DESIGN Vintage front fender installed, and it's pretty tight Because of the tight height, I bought it as Up Stay. 18Inch Fender for 19Inch I thought it would be listed at about the same level, but if you read the description section carefully, you'll see that it's a high TireHeight one It was only made to correspond to the extent that it was made to support, and it was only about half-Inch Up in real terms
The Fender doesn't interfere with those who have a high-height Tire installed Recommendation, but if you expect 1Inch Up, as I do, it's not the right use
One-off would probably cost twice as much as this, so the price is pretty low
The bracket is thick enough to withstand the vibration of the SR400 and not break so easily I think
However, the 6-corner Nut was brilliantly not in there at all I was able to deal with it because I had a surplus at home, but I felt bad for myself for tearing the packaging prematurely without checking, but before I opened the package You should check it out carefully
View detail
Awesome
Well... this fits perfect. Great Quality and those Footpegs are so cool! Can't wait to roam the streets in style with those awesome controls! Even the Chrome has a really good quality! View detail
It saves the effort of making from materials
If it is expensive or cheap, is it a safe Gold amount or cheap one?
It is not time consuming to manually punch a hole by machining R with uniform thickness of iron plate,
Impossible.
It is prudent to additionally process based on this, even if you ordered at a Custom shop, buy and process such things
It is regular to weld.
Unlike ordinary products for surface treatment, it will rust unless it is painted after welding, so he will be nervous
It is not what I say.
Not bent - It is roughly not rusted - It is a good thing if it is not deep even if there are light scratches.
I was concerned about the search because it was not often selling, even the same thing was displayed with a different price.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Awesome! fits 2015 SR400FI perfectly!
Easy installation on OEM mount points! Quality looks good and it really cleans up the bike well! This was installed on a 2015 SR400 FI. View detail