Reviews
I purchased this for Tank removal.
The Tank of CB1300 is fixed with Frame and Wire, and this Wire is fixed with Torx screw, so I bought it to remove this Wire.
I don't think I will use it very often, but it would be nice to have.
It also comes with a Holder, which is convenient for putting it away.
The product is from a well-known manufacturer and can be used with confidence.
In general, the product is satisfactory.
View detail
Very effective for cleaning inner axles of Wheel, etc.
Purchased for maintenance of a friend's moped scooter.
It was mainly used to clean the inner axles of the Rear wheel and DrumBrake lever when replacing the Rear Drum brake.
First, apply Cleaner firmly, then add more Cleaner each time while polishing with this product.
The dirt was removed amazingly well.
We applied Grease while using this product as a brush at the end, so I think it has a lot of applicability.
Motorcycle parts are often inaccessible due to the large size of the body, so the large size was very useful this time.
Since it is not an expensive product, it should be disposable.
In that sense, I think it has excellent Cost performance.
One difficulty is the hardness of the brush part, which is made of gold, although this is to be expected due to the performance of the product.
Do not hold the Brush part with your hand when actually using it in your work.
View detail
thin
I wanted something thin as a Spanner for tightening Nut and found this one and bought it.
Large, thin, and just right, and the price was reasonable.
View detail
It's cheap
I bought this for the Piston Polish on my Brake and it was easy to use. I would have used the Tooth Brush if I had it, but I think the Tooth Brush is just fine. View detail
When you need Torque.
I used a Spinner Handlebar to remove the Sidecar from the MotorcycleBody because the Bolt would not turn.
I used this Spinner Handlebar because the box wrench I usually use seems to break the wrench. 380? I was able to separate the Sidecar from the Body, and when connecting the Sidecar to the Body, I can also apply the Torque to tighten the mass.
The handlebar is heavy, responsive, and easy to use. Depending on the location, I felt that even with a sticking bolt, it would be quite possible to use this handlebar after spraying it with lubricant.
View detail
Screw Catch DV No.470
I haven't used the Screw catch yet, but it seems to work well in tight places without dropping the Screw. However, it may be a little difficult to push down by hand in tight places. View detail
The protrusion can be used
The protrusion is usable, and the GEAR is just the right lightness. View detail
GEAR is delicate
The GEAR mess has a delicate sound.
They work well in tight spaces.
I use it a lot in tight areas of Stroke.
View detail
We have what you need and as much as you need.
We have what you need and as much as you need.
I split the Socket rail in half and keep 5 that I use all the time and the occasional Size separately.
Finally, the Small object tools will be machined and used, so I would like to have a good cosmetic tool.
View detail
Conversion for attaching Screwdriver Bit to 1/4Ratchet
SK11 CompactStubby Ratchet Handlebar with 6.35mm 1/4Inch SRH2CS
Purchased to install Screwdriver Bit.
I was not sure about KOKEN, but it was cheaper.
Bit removal is nice, not too hard and not too loose.
Since it is unlikely that the Bit will be removed in normal use, the Type with Lock Function and
I thought it was not inferior to the others.
On the other hand, if you frequently attach and detach the product, this is the way to go because the operation is a little more time-consuming but no longer necessary.
I think it is convenient.
The best thing is that it is cosmetically pleasing.
View detail
As a Driver
Purchased as Ratchet driver.
I don't have basic tools for 1/4 and mostly 3/8.
Bit Adapter SocketSBA2 is attached to it.
Tone for fast turnaround (TONE) Quick adapter QA-02S is also installed.
I thought it might be too small for my palm size, but it is just right.
Especially, the weight of the thick part at the end of the Grip is a good weight when turning quickly.
It is easy to turn.
Bit uses Wera.
View detail
Bring the narrow space?
I was looking at Webig's tools and found the Smallest Ratchet Handlebar and immediately bought it because I thought it would be useful in tight places. I have not used it yet, but it is great for tight spaces. I am glad I bought it. View detail
Holder.
It works fine
Holder is 8 pieces, but the Spec. is different compared to the one with Socket wrench of the company!
There are no plastic Parts at both ends, so I will wrap it with Tape.
It is easy to use if you write the Large size of the Socket in each Holder!
View detail
Convenient
The long socket makes it ideal for working in a secluded area.
This much. [Contents] Therefore, we have a sufficient range of Size.
The quality is high quality and easy to use.
View detail
Easy to use
The wooden handle is easy to hold and the amount of Brush is abundant, which is a feature of Large.
It is very easy to use for removing dirt from Drive chain and rust from Parts.
Since it is Brass, it is hard to scratch the Gold genus and effectively removes Rust.
View detail
Easy to use
A firm magnetic force is applied by simply rubbing the Driver about 5 times.
It is very convenient because it can be hooked onto the tip of the Driver to avoid dropping Screws, etc. into tight places.
View detail
easy to handle
The lightweight body of the resin type is very light to use.
The Grip is also easy to grip and use.
Gold is cold in winter, but this is not the case with this product.
View detail
Easy-to-use Quantities:Set
Quantity of Extension bars in three easy-to-use lengths:Set, so you can use it as a
It is convenient and affordable for any SCENE.
Each length can be used in different ways depending on the occasion. The solid construction and mirror-finished plating give it a luxurious and beautiful look.
View detail
Is good
It is well made and easy to use.
It is durable and easy to use, and its workability is no different from the high-end Universal joint.
Quality is high.
View detail
Small and convenient
It is convenient to Stroke because of the fine GEAR even in narrow and ineffective angles.
The Ratchet works well and has a swivel function so it can be used in tight spaces.
It can be used in a variety of Situations with a lot of freedom.
View detail