Reviews
It peels right off.
For Z8,,
2023/03/20 Purchased a Blue Type of this
2023/09/12 Red Buy this
I didn't want to change the color.
Mirror coating on the surface peels off quickly.
Coating to repel water is still peeling off easily, even the mirror part is peeling off.
At first it peeled off when I wiped it with SurLuster0, which is self-inflicted because the warning on this product says to use water only and apply Towel lightly....
(Mirror shield on Z7 didn't peel no matter how much I scrubbed it, so ......)
I was careful with the new Redi Type, but even with very careful care, it was peeling.
This is a RECOMMENDATION for those who can afford to replace it in six months.
The attached image is fogged up with breath for clarity.
View detail
Looks as good as expected
Buy Blue in Semi-smokeBase.
The color of the look is beautiful, just as I expected.
I wore it and actually saw it running, and the visibility [Color] Clear and no problems.
Mirror coating peels right off." I have not experienced such a problem with the one I purchased, so far.
View detail
Is good
Visibility is good day and night.
The wind is rather blowing.
The rain doesn't get in your eyes, but it does get you wet from the nose down.
I put it on instead of Sunglasses and it is fine.
If you want to protect it from wind and rain, it may not be enough.
View detail
Blue mirror shield gives a slightly yellowish field of view.
[How is it used?
NORMAL is a clear shield, and although I feel that the parenthesis is bad, a darker Mirror shield would interfere with nighttime driving, so I decided to use a Semi-smoke Mirror shield.
Was the one you received as per Image?
I was worried that the color would be lighter than the Image and that it would be visible in its entirety, but when I installed it, it fit perfectly and was a good parenthesis.
Was the installation difficult?
It was easy to replace it by referring to videos on youtubeetc.
At first, it did not go well because I did not understand how it worked, and I had a little difficulty until I learned hang.
How was your experience with it?
The field of vision is bright at night with no problems.
The cheap Mirror shield is [Color] I was worried about the darkening of my field of vision with SmokeBase at night, but this Shield works perfectly fine.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
During maintenance, there are a few troublesome points such as running dirt under running water to prevent Coating from peeling off when cleaning.
▼ Many people say that Coating has peeled off quickly due to rain, etc. In my case, I wipe it off with neutral detergent, but so far I have been able to use it without any problems.
View detail
It's not the same.
Is it really for EX-ZERO?
I'm disappointed with all the gaps.
View detail
Lost me with Dark smoke.
After much deliberation with Dark smoke, I decided to go with Merrow because of the nighttime hours.
The Mirror effect was also mellow and hard to see from the outside, so mellow was sufficient.
It is visible even at night and is recommended!
View detail
Mirror shield is the only choice!
I bought the same one because the Mirror coating was bald when I was running while wiping Shield on snowy Bandaiyama.
The only drawback is that they are prone to baldness if rubbed when wet, but they look cool and reduce glare during the day.
We also appreciate that the OEM Pin Lock Seat can be installed.
Mr. Yamashiro, Tour BlackV has been released, but there are still many Tour Black3Users out there, so please continue manufacturing!
View detail
New and feeling Refreshing
The Helmet Shield for CHOINORI was damaged, so it was replaced with a new one.
It is easy to install.
View detail
Can be attached to ARAIJet helmetS-70
The visibility is good with little distortion, but when the Shield is lowered, the wind entrainment is so great that the wind received feels stronger than without the Shield. View detail
The product is of good quality and works well. View detail
First time! Bubble shield
I think it is good. As for myself, I am satisfied!
At first [Color] I thought Smoke might be too dark. I thought so, but when I actually put it on and ran, it didn't bother me that much.
View detail
Good job on the brim.
There is no distortion at all in the Shield, so much so that I forget I am wearing it.
And the brim is good! Is such a small protrusion useful?
but it helps reduce glare.
(It's not possible when the sunrise or sunset is right in front of you, though.)
View detail
As expected
[How is it used? 1.2 times a week
Was the one you received as per Image? Street Image
How was your experience with it? As expected from an OEM, it is perfect.
[Points to note] I'm afraid of shifting the Goggles and driving away, as if they're going to fly away.
How did it compare to other products? Nomination Purchase.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
I was able to install it on my Arai ClassicAir.
Moving parts are a little stiff. A cracking sound sometimes occurs near the moving parts while driving. View detail
The Helmet will make Parenthesis even better!
[Base color [Color] Clear
Mirror coating color Titaniumium silver
BaseShield is fine with OEM; OEMPin lock can be installed, of course.
Clear base, but you can't see my face and it's not too dark. As for my usability, I am very satisfied with this product.
View detail
Fits: Others For MNF1 END MILL
Atmosphere at a low price.
The Helmet is a low-priced but chic and well-designed helmet, but the interior and other aspects felt price-approved. [Color] I recommend Smoke because it covers that little concern and is cooler than anything else. [Color] Smoke, so naturally [Color] It is hard to see compared to Clear and also other companies' [Color] Compared to Smoke, the impression was pleasantly darker. View detail
Good visibility
No installation or visibility problems due to OEMQuality.
Smoked red, but the Shield is closed at night except in residential areas where there are a few streetlights.
From the inside, it's normal. [Color] It may be similar to Smoke.
I've been watching other people's impressions of the Coating peeling off, etc., so I try not to touch Shield too hard, so it's been about 6 months and so far I haven't seen anything wrong.
View detail
Repeat purchase.
The VESPA Jet helmet does not have an Inner Shield built in, and when I was using it with this Shield installed, I inadvertently damaged the front of the Shield, and the wound was in my field of vision, so I bought a repeat pair to replace it.
Our favorite for daytime use only. "Light smoke" to the
Chin guard converted from Harrison, Harrison Chin guard (Old model) The surface of the "K" was worn out with age, so we prepared the surface with Sandpaper, and painted and rebuilt it with leather paint.
This Shield, personally, is more than Over Glass or Co-GRU. (against flying objects) I think it gives me a sense of security, and when combined with the Chin guard, it provides insect protection to the lower half of my face, and I now use it most frequently among the helmets I have on hand.
The Jet helmet with the Inner Shield built in looks Refreshing! On the other hand, this Shield may divide opinions, but personally, I think it looks good on Bobber style or Cafe racer.
The best part is that they are reasonably priced and can be easily replaced if damaged.
View detail
TIGHTLY installed!
Color as nighttime visibility:Buy Yellow.
The 3Snap for mounting is also tight and can be mounted securely.
When Shield was raised and lowered, there was also a clatter of clacking and opening angles so far.
I have not yet driven with it, but I think it might be less wind-induced since it can cover the lower part of the nose when the shield is down.
The Shield surface has a smallest protective seat attached to it, but it does not seem to affect visibility even if it is left as it is, so we will consider using it as it is for a while.
I was able to purchase it for a little over $2,000, which is an amazing level of satisfaction for me!
View detail
Countermeasures against the west sun
It is mounted on a LEAD APRETJet helmet.
I have been using Smoke Shield for a long time because I still get dazzled by sunlight when I run during the day.
This was my first LEAD product and it was pretty dense. [Color] It's Smoke, similar to Company A's darkest, until now, in the evening. [Color] I had replaced it with ClearSEEDle, so I thought it was a good idea, but to my surprise, the SEEDle could not be removed and attached with one-touch, so I had to remove the Screw and replace it.
Well, it's OK because it doesn't take more than an hour to do the work, but if you don't replace the parts before dark, it will be a problem if you drop the parts on the road.
View detail