Reviews
DAYTONAMiVue has been installed on a Ninja 1000.
It is designed for Ninja 1000SX, but I bought it because I heard from an impresario that someone with the same model (Ninja 1000) as me was able to install it.
What was a bit of a gamble was the product description. "MITSUBA Made in KIJIMA. DAYTONA (MiVue), because it was said to be a driver's record... (R) (M760D) can be installed? (It was installed by a Motorcycle shop)! (It was a Motorcycle shop that installed it for me.)
There is no interference when folding the Mirror or adjusting the height of the Screen. The car stops firmly without any vibration when driving.
View detail
![Motorcycle Dedicated Drive Recorder EDR-21 α Series Model With GPS [DRA RECORDER].](https://img.webike-cdn.net/catalogue/images/91097/gwqa_TS.jpg)
Fits: Others
This is what you think of when you think of driver's recordings
Mistuba Sankowa is a reliable company.
The performance is unquestionable, although sometimes it does not connect with the phone app.
View detail
Used for RearCamera installation of a driverless camera
When I was thinking about where to install the RearCamera when I installed the Mistuba Sankowa EDR-21G myself, I found this product.
Note that the bolt used to attach the Camera Bracket is small.
After installing the RearCamera, I am satisfied with the refreshing appearance.
View detail
It interferes with the Fender Eliminator and is unusable.
In the picture it looked like it was attached to a Fender Eliminator on a Z900RS, so I bought it thinking I could attach it without any problem.
However, in reality, as shown in the photo, the angles do not match and there is too much interference, making it unusable.
There are a wide variety of Fender Eliminators for the Z900RS, but mine is an Active product.
Active's Fender Eliminator differs from other Manufacturers in the number angle and the distance between the Lamp and Number.
I think it's because of the proximity. But Active's Fender Eliminator is the most beautiful because there are no weird gaps.
I'm not sure if I should return it.
If you are a Fender Eliminator and the Lamp and License Plate are close to each other, please be careful.
View detail
Not for use with Stainless Steel Hose
I have a Stainless Steel Hose from Swage line and could not use it due to interference.
I could have used it if it had been directly below without the odd Offset...
I think the OEMHose is SMART and easy to install.
View detail
![[Replacement/Optional Parts] Camera For EDR (with Bracket)](https://img.webike-cdn.net/catalogue/images/82780/147878689_TS.jpg)
It was saved.
I bought it because my FCamera went bad after a fall, and I was glad to see that CameraSingle Item also sells it. View detail
Would you prefer a little further back?
I have no problem with the overall construction, but when I put it on, the Emblem looks a little far away from the Fork, so I would have liked it to be a little shorter. View detail
Adapter with RamMount1 inchBall
Installed by drilling holes in Upper Cowl Bracket and using Ram Mount
I don't think it is suitable for people who find it a little difficult because of the drilling process required, or for those who are not comfortable with drilling holes in Motorcycle.
Bolt can be fixed, so it can be fixed firmly.
View detail
Arm for Ram Mount1 inchBall
I bought it, but it was a little too long, so I bought the short version as well.
Standard Arm is unexpectedly long and bounces around too much when fixed to Handlebar
The thing itself was very well made.
But it didn't suit my use.
View detail
Impressions after using it for commuting.
I am currently using it for commuting on my Motorcycle in case of an accident.
The image is not as clear as I would have liked for using image stabilization, but I think that's about it.
One complaint is that the battery does not last as long as expected, so we would like to see improvements here.
Also, when I removed the waterproof and dustproof rubber part of the back part of the body to charge the battery, the thin rubber part that connects it to the body broke off (I contacted the manufacturer and they sent me the part because it was an initial defect). (I contacted the manufacturer and they sent me a part.
We trusted JAPAN and were reassured that After Service would be done properly.
View detail
useful gadgets
My motorcycle mobile phone holder is RAM, and the RAM holder is easy to be dismantled. If the car is parked outside, others will take it away with a twist, and the loss is quite large. So I bought this RAM MOUNT RAM plastic arm lock on webike. After locking, you must use the matching cover to remove it to protect the safety of the mobile phone holder. -------------------------------------------------- -------- My motorcycle's mobile phone bracket is RAM, and the RAM bracket is easily disassembled. If the car is parked outside, others take it away, and the loss is quite large. So I bought this RAM MOUNT RAM plastic arm lock on Webike. After locking, I must use the supporting lid to remove it to protect the safety of the mobile phone bracket. Powered by Google Translator View detail
Defective in protective rubber
When I tried to charge the battery, I removed the BlackRubber that is attached to protect the important parts of the Power Supply Cable etc. and bent it slightly, and the part connected to the Body was cut off. Since the body and the rubber part for protection are now separated, I have to be careful not to lose it when I charge the battery. I was disappointed with the quality of the product and was dissatisfied with the defects that occurred immediately after opening the package. Is it really JAPAN? View detail
It may be an individual difference, but Camera broke after less than a year.
I use two units.
One of our RearCamera units became defective after about six months.
I can say that it is to the extent that it is, well, I pulled a HaGap, but I am slightly unconvinced by the operation.
When there is a problem with the Camera, the LEDIndicator on the Switch blinks to let me know, but for some reason, other functions are malfunctioning in various ways.
It is supposed to connect to my phone via WiFi, but the connection is very unstable, and for some reason I could not connect to the Android app, even though the WiFi itself is connected.
Naturally, you cannot drop videos to your phone via the app, you cannot sync clocks, etc., and you cannot change various settings.
At least, the recording seems to be able to continue only with an active Camera.
I suspected a problem with the Body, but since I have two cameras, I tried connecting only the Rear Camera, which showed a problem, to the other Camera, which had no problem, and the application was connected and settings were available.
The LED indicator also seems to be unstable and may or may not display the status of a defective RearCamera, so I think it is better not to trust the operation when there is a problem.
If everything is normal, the camera is Large sturdy, so it might be a good idea to try connecting to WiFi once a month even if there is nothing going on, check if the app is connected, and check if the video is taken properly and the Camera is working properly.
The images that are taken are good enough to check the number of oncoming vehicles, etc., so the performance in that area is adequate.
View detail
as always
The Plate is not so bad, but the SMARTness after installation is good. View detail
Best installation method
The most difficult part of installing a Camera is securing the mounting position. This product is easy to install, looks unobtrusive, and fits in the refreshment area, so I think it is the best installation method for the Rear. View detail
That's what I'm talking about
I have been using it on my Camera Mount and have been trying my best to use the accessory type until now, but it broke, so I replaced it with a complete set made by Ram Mount and I am very impressed with the excellent feel and texture. View detail
EDR21A
We chose this product because it had good reviews and ratings.
The quality of the product was good and installation was not difficult.
The installation took about 3 hours, but it took longer with the Wiring routing, Cowl removal, etc.
The picture quality is satisfactory with almost no blurring, as I had checked on YouTube, etc. The Body is installed on top of the Battery under the Seat, and it fits well.
Microphone sound is also picked up at just the right volume.
I check the video by unplugging the SDCard from the Body, and the app is easy to use. There is also a way to connect to your phone via Wi-Fi and Download, but other people's reviews show that it takes longer with IgnitionON, so if you are concerned, it is better to unplug the SDCard to watch.
Overall, a very satisfactory product.
I don't know about durability as it has only been installed for a short time.
View detail
Good product.
I purchased MITSUBA based on your Review!
The Large size of Body is a little too large and the length of Camera's Wiring is a little too long.
I am generally satisfied to the extent that I was concerned.
Wiring on the Rear side is left over since the F/RCamera is common.
This type is not a problem because Space under Seat is wide Large.
I think the storage of Body and Wiring is Large in SS and SF Type.
I use Wi-Fi to check the video, but I can't get a connection in Preview.
I heard it was bad, but I had no problem with it.
*It was × on Android, so we supported it on iPad.
The video and performance are beautiful day and night with no problems, so the quality is ☆×4
As for durability, I just installed it. I'll give it a star×3
It is unclear what will happen in the future with warmer temperatures and the rainy season.
So far I think I made the right decision in buying MITSUBA!
View detail
Prepare for accidents and aggressive driving.
I used to use Daytona's monocular ActionCamera and DVR, but it finally broke after several years of use, so I replaced it with this one. The instruction manual is very well written, and I can check the settings and images on my smartphone. I chose front and rear type and pushed the body into Seat CowlRear. 128G card is high durability type. View detail
Old Type, but enough!
The new model is more waterproof, but if you install it properly and are careful when washing the car, the old model is fine and the image is beautiful.
The drawbacks are that the connection with SMA Four Pre cannot be made unless the connection is made with the in-flight mode, and the download of the image data takes longer than expected.
View detail