Reviews
The lowest product
It is the lowest product.
Let's use it and see it Big !! It broke easily.
It is like throwing away Gold.
I think how to release such a product.
I bought it and lost it.
View detail
It is a special tool, but both hang and power are necessary
I think that it is necessary to have considerable grip strength to Cut Chain with this tool alone.
As usual, it was cut with Thunder and finally removed with Chain Tool.
For Crimp, we need more experience. Worked while checking the amount of Crimp.
Since I have not used any other expensive CrimpTool, I can not judge the usability but it is a necessity for work at my own risk.
For those who are new to the first time, I think that the Instruction Manual is necessary. It was not attached to the item that I bought.
When searching to write impression this time, it was sold out.
I hope that it will be upgraded and resold.
View detail
I will not buy it anymore.
Instruction Manual is a bit hard to understand.
In the first use Pin for Crimp loses to Pain of Chain and is going down.
Lack of hardness? I will not buy it again.
View detail
Does the product description correspond correctly?
In the product explanation on the Web, the corresponding Size was from 420, but the hole escaping the Pin of the prestool did not match the 428 and could not press the Link Plate. Since it can not be helped M6 Nut Quantity : 2pc. Instead of putting it between Plate and Tool instead of SetSpacer. Even if you look at the instruction manual No description of the method of press-fitting Plate at Chain of Small Size.
Did you misunderstand how to use it? It is unknown whether the product description is wrong.
View detail
I have not used it almost ...
I tried using it for Chain of press-fit Clip type but it was able to be used without problems
I have not done Crimp or Cut
I do not know whether it is durable or easy to do
I think it's a good one
View detail
It is difficult to adjust power
I used it to replace Chain of OEM 428 Size with Chain of 520 Size.
Although it was my first work, since the handling Instruction Manual was written kindly and politely anyway, I could finish my work safely.
First I do the work of cutting the chain I am currently using with the Chain Tool, but it will be pretty exciting whether Pin will not break because Pin is pressed and it starts to move, it is very hard. Once you start to move it you can fasten more quickly.
Next, it is used for press fitting of Plate. Because you have to keep the position so that Plate does not fall off while holding down the press-fitting tool, I want three arms only at this time. In addition, the moment when press-fitting is completed, there is no standard as feeling of the hand turning Wrench, so it is better to move slowly and carefully until you get used to it.
Finally, Pin's Crimp work, but like this Plate press fitting, the feel of the hand is all in the end. Unlike Plate, if Crimp passes, Pin will be damaged, so I removed it many times and confirmed Crimp condition.
I think that you can work on Smooth if you get used to it, but since I do not exchange chains frequently in individual Levels in the first place, I think that it will be a few years later.
It is safe to pay the labor by Motorcycle shop and exchange it, basically it will be enough.
The purpose of purchasing this tool is to improve your own maintenance Kill and gain experience from all over.
In this age of mail-order sales, such selection can be made without ordering to Motorcycle shop. Depending on the location conditions at home, it may be very difficult to bring it to Motorcycle shop after ChainTrouble has happened. Also, if you are going to do long distance touring that is over thousands of kilometers, you will need to carry tools that can cope with sudden Trouble and Kill,.
Because it becomes amateur work, it is all self-responsibility. I succeeded this time, but I think that I missed it. Because failure is the best experience.
By maintaining this way yourself, your attachment to your Motorcycle will also be strengthened.
I would like to touch such a tool if it is a Motorcycle that I want to keep in touch with for a long time.
View detail
Whether it is necessary items
Because I like Non-seal Chain, I purchased it because Chain exchange frequency is also high.
Pin extraction and crimping require a lot of strength. I also install ROD to secure Clamp firmly, but because ROD is thin and somewhat short, I do not get much power. I bought a round bar of wood in Homsen and I use a hole with a hole so that this ROD stick can be inserted.
I strongly recommend power because it also enters firmly, but who thought of this was a good grasp and a strong ??
It is handy with a tool that can be used quite a bit.
Before purchase, I had to scrape Pin with Thunder and removed it, but because Chain with Grease was scattered with scattered whetstone and iron powder, now this tool is indispensable
View detail
Even safe at first Chain exchange.
Purchase for Chain exchange of CROSSCUB.
Although it was the first Chain exchange, since it was with the Instruction Manual, Chain cut was also made easier.
Since it corresponds also to the Chain of the Large Engineering Displacement Volume, I'd like to try TRY also for the Chain exchange of GSX 1300 R HAYABUSA eventually.
View detail