Reviews
I knew it was good, but expensive.
It has a certain thickness, and the casual YOSHIMURA logo satisfies the sense of ownership, but it is still too expensive. It is too expensive. Of course, the gabon is laminated to make it thicker, so it would be sad if it gets cracked with age. I changed from DAYTONA reflector. View detail
It is a modest but very good product.
I installed it on my beloved YZF-R7.
Active's Fender Eliminator Kit was installed.
The reverse side of the License Plate is completely visible, and dirt is also adhered to the plate.
I decided to install the License Plate Base because
The first time I saw a new building, I was surprised to see it.
We were originally going to install KIJIMA's, but it was sold out.
So I was looking for something else and found this one.
Rubber is attached in the middle to reduce vibration and runout.
The first time I saw this, I was really impressed with the quality of the product.
I really like the way it looks and refreshing.
View detail
A little Size.
I bought it thinking it would be a little larger than the Number because it was for 50-125. Also, the pcx mounting bolt is a little short, so you may need to buy a separate bolt with the thickness of the plate. View detail
Quite Compact
Used with 10R Fender less.
Generally as expected, but the Lens portion is quite thick, probably for light distribution.
It would have been better if it were shaped to be nearly flush with the Plate, so that it would be less present.
The wiring was done by attaching a male Bullet Terminal to the wiring of this product, connecting it to the POSH BlinkerConversion Connector, and using a very cheap Chinese Relay (Orange guy) as the Relay.
The wiring outlet was poor as it was, so we reinforced it with silicon clay called "sugru" and also a WiringBracket would be good to make the wiring fit the body of the car.
View detail
For preventing number deformation
Fits Number and Exactly. Black is good for a unified look from the back. View detail
Fits: Others Universal
Just fit.
I bought the License Plate because I thought it would look better than if it was just stuck on the car body. Installation is easy, nothing difficult.
As a precaution when installing, the included anti-squeak spacer is too thick. I applied double-sided tape to a 0.5mm thick Vinyl sheet, cut it to a suitable large size, and attached it to the License Frame.
The only complaint I have is that it is a bit expensive.
View detail
Don't ever make a purchase possible!
SSK's product was also Large outlined, but
The only thing I managed to do when I roasted it with a heat gun was to
This can be seared to death and bent in the opposite direction of distortion.
The distortion will return to its original distorted state and the distortion will not be corrected.
Also, the product image looks like Carbon.
The back side was FRP with a dirty finish.
View detail
Just fit!
I was looking for a Hara2 local Number and could not find one that fits the rectangular Type. I love the texture of this purchase! If it were a little more cost-effective, I would give it 5 stars, although the All rating is maxed out. View detail
Fits: Others Universal
It was installed without difficulty.
If you have Driver and Wrench, you can install this product without difficulty.
The single-cylinder engine absorbs vibration well without making the number flutter, even on a motorcycle where vibration tends to be large.
View detail
For protection of Number and prevention of mud splashes.
The expected effect was to prevent mud splashes during Fender EliminatorSpec.
This part is installed in such a way that it opens outward from the back, so that the smallest possible area can be used to achieve the largest possible effect. The impression was very natural! When I checked the reverse side of the car after driving, I found that the mud splashes were properly controlled, and there were no splatter marks on the surface of the number.
Nutty Off forest roads and rough weather, even OEMFender can't prevent bounce-offs, just as we expected.
It is not bad, but it is heavy because it is steel and I wonder if it is my installation problem. I have noticed a chattering sound similar to that of the Off car's Under Guard at certain RPMs when the car is first warmed up.
That said, there are no other parts of this type that can be found anywhere else, making it a rare and precious commodity, and it is also extremely easy and simple to install, making it an easy and highly recommended part.
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
Stylish License Plate Bolt
The License Plate Bolt was plain, so we installed this product.
The texture is good and will improve the appearance of the car body. You can also choose the color you want.
The installation nut is not included, so the original one must be diverted or a new one must be purchased.
It would be kind if you could include a flange nut with a non-turnover spec.
View detail
Fits: Others Universal
Could it be the lightest License Plate Holder?
Purchased to prevent License Plate from bending.
Although the License Plate Holder is extremely lightweight, the shape of the outer circumference seems to have been designed to ensure strength.
Therefore, it is considered to be strong enough to meet the needs. It is lightweight, so the increase in vehicle weight is kept to a minimum.
The Bolt included is excellent, and the anti-dropout type makes it safe to drive.
When installing the Bolt, it is recommended not to over-tighten the Bolt, as this will cause the License Plate to bend.
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
things (which) may or may not exist
I bought Plate in Gold to go with it.
I like the variety of colors that are available.
There is nothing wrong with NORMAL Screw, so it is really self sufficient.
View detail
sufficient for one's needs
I bought this to counteract the fact that the Number was bent before I knew it.
I think it is a good measure.
I like that there are so many colors.
View detail
buying a new one (esp. a new one in the same store)
I bought the wrong size, and went straight to the purchase shop. 。 I bought a new one. View detail
Mounting Posh Cap bolt decorating License PlateMounting Bolt
Since the License Plate Mounting Bolt is not enough, I wanted to have something one point, so I purchased Posh's CapBolt & Nut Set for License Plate fixing this time.
As for the color, Gold was selected.
Reddit's Gold!" I have been using Gold as an accent on my motorcycle in some places, so I wanted to add Gold to the balance of my motorcycle.
Well - I think this will be the Sense of the buyer.
I think it is a self-satisfied attachment, but I am happy that I bought it and installed it.
View detail
Effective for vibration control of License PlateLarge
Used for KLX125.
Since the License Plate has been cracking due to vibration, I installed it for protection, but it seems to be stronger than aluminum and so far I have had no problems.
I think the quality is good with no unevenness in plating.
View detail
Fits: SUZUKI GSX-S750, HONDA CBR500R, YAMAHA YZF-R3, HONDA CB500X, HONDA CB150R, HONDA CB300R, YAMAHA YZF-R25, YAMAHA XSR900, SUZUKI GSX250R, SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-R125, KAWASAKI VERSYS-X 250, HONDA PCX125, HONDA NC750X, HONDA CBR650R, HONDA CBR650R, HONDA CBR400R, HONDA CB650R
Easy and convenient dress-up?
I purchased this in adjustment to get free shipping on other products.
Installation is easy, just remove the original bolt and replace it with a new one.
I think it is good as One point.
View detail
Mounted on Large-type car Number
I installed it on my CB1300SB. The length of the License Plate Bolt is limited because of the Camera Holder.
Also, I think it depends on the NanBar size, but the corners interfere a bit.
View detail
Fits: Others Universal
License Plate does not appear to be broken or bent
Mounted on Rocket3gt
Although the motorcycle does not vibrate that much, I bought it to protect the License Plate that was directly attached to the vehicle body.
I think I made a good purchase as it is very lightweight and will serve its purpose discreetly.
The License Plate standards have become stricter, but the fact that it also conformed to those standards is also highly commendable.
However, it is almost the same size as the License Plate, so it is not obvious at a glance that it is attached.
I don't think it will serve the purpose of dress-up or adjusting the angle of the Number.
My only regret is that I felt the price could have been a little lower.
View detail