Reviews
Compliance with new regulations provides peace of mind
Due to changes in the law, the installation method used to be [Color] Since I could not clear it, I purchased a POSH License Plate Holder and a Number Fixing Bolt. This will help me to comply with the stricter labeling rules. [Color] The number fits nicely without any fluttering, and the dress-up effect is outstanding despite being a simple part. View detail
New regulation compliant product
Strict License Plate Labeling Rules Made Stricter by Revised Laws [Color] The clear surface gives a sense of security. It is a simple part, but it also has an outstanding dress-up effect. I recommend this product. View detail
Installation in conjunction with RearFender cut
CROSS CUBFJ60 I installed this product because I lost the triangular mark due to the rear end cut of the Rear Fender of the "Rear Fender". View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
You should definitely buy it!
When I bought a motorcycle, I immediately ordered this product to protect my License Plate. (^ ^) View detail
Fits: HARLEY-DAVIDSON FLFB, HARLEY-DAVIDSON FLSL, HARLEY-DAVIDSON FXBB
I want to cancel it.
I want to make a cancellation, but there is no Cancellation item.
Please take a few minutes to complete the Cancellation procedure.
View detail
Fits: Others Universal
For those who want to wear a Slim Reflector.
ReflectorSince even a Single Body costs about this much, this price is inexpensive for a Number pedestal and a discreet reflector.
The Bolt is also inconspicuous, and the look and feel of the Bolt is much more stylish.
View detail
For those who want to casually prevent License Plate cracks.
Purchased for W800 License Plate vibration control.
The thick aluminum plate is effective in preventing cracking of the Number without resonance.
Since it is the same size as the License Plate, it does not protrude from the License Plate when installed, and is recommended for those who do not want to look like they are installing a frame.
When looking at the License Plate from the Rear Fender side, the reverse side of the License Plate can be seen, which can be covered by the Plate.
View detail
Fits: Others Universal
Care must be taken during installation.
Motivation When I bought a new motorcycle, it was delivered with the License Plate installed as it was, so I bought this to prevent the License Plate from being bent when I put on the Body Cover, etc.
Accuracy, texture, etc. I am satisfied with the accuracy of the Large change. The back of the License Plate looks unreliable at first glance due to its light weight, but there is no problem at all.
Difficulty of installation It is very easy. The only thing to note, however, is that there is a thick rubber between the Number and the body, which is attached to the body as an anti-vibration measure. In other words, the gap between the License Plate and the Body is quite large, so if you tighten the screws without paying attention to the gap, the Number will be bent. It is recommended to tighten the screws little by little while checking the installation condition.
【Review】 It is highly accurate at an affordable price, and is highly recommended.
View detail
Fits: BMW RnineT, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Pure, BMW RnineT
Fit feeling is okay I guess.
RnineT Pure is now a Fender Eliminator, and the Japan License Plate goes on it with no problem.
The English version of the Instruction Manual (mostly photo explanations) makes installation easy.
However, the quality and texture of the joints with the RearLamp are not quite right, so I would rate the quality and feel of the product as dry.
View detail
Special shape
It is sufficient as a PlateHolder.
I can put a triangular Mark on the moped type 2 where it sticks out.
View detail
Simple
The back of the number has been refreshed. View detail
The edge is Beauty, but I'm worried about the gap.
I was looking for a moped license frame in silver and came across this one. The frame edge is beautifully made. The screws are a little difficult to fasten when installing the number because the sponge is a little wide. Also, there is a little gap at the corner of the Horizontal Type Number. It is a little bit of a gap at the corner of the Horizontal TypeNumber, but it is not noticeable when seen from a distance. The number screws are probably stainless steel screws, but they are made of a material that looks like a rusty nut. When completed, it has a beautiful, casual custom look. I am glad I chose this License Frame. View detail
Fits: HONDA 400X, HONDA CB1300SUPERFOUR, HONDA CB650R, HONDA CBR400R, HONDA CBR650R, HONDA CBR650RA, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CMX300A, HONDA CMX300AAC, HONDA CMX300AC, HONDA CRF230L, HONDA CRF230L
Recommended for License Plate installation!
I purchased a License Plate to use as a pedestal to attach to a Bracket.
The texture was nice and clean.
The thickness was good, too, as it seemed to be there.
Installation went without a hitch.
View detail
Speaking of SEA BASS, is it YOSHIMURA?
I used to use Stainless Steel or Aluminum Holder, but now I found Carbon Holder from YOSHIMURA, so I bought it.
As expected from CarbonMaterial, the lightness and strength are very reliable. The price is a little high, though!
View detail
It's bigger than NanBar size.
I was looking for a NORMAL frame, but I found this product and bought it because it was available for mopeds and 125s.
The other thing was that it was difficult to align and fit them together.
View detail
A little over $1,000 can make a world of difference.
I think it's a waste if you don't do it. I didn't want to show the number, but please refer to the left side of the picture. (Lol) View detail
Fits: Others Universal
Light and strong
It is lightweight and strong enough not to be deformed by light twisting. It also improves the appearance and makes the number area look tighter. View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Small
I purchased this to prevent bending the License Plate by catching clothes or Motorcycle Covers.
This product is simple, sturdy, inexpensive, and good, but the four corners are cut to a large size, so the license plate protrudes.
For this reason, it was not able to meet my requirements and was put in storage.
View detail
Parts with a handmade feel.
I wanted to install something around the over-refreshing License Plate when I converted it to a Fender Eliminator, and I came across this product.
TitaniumPlate's baking color is not too flashy and Material:Polishing surface is Beauty there.
Since it is a UniversalParts, there was an explanation in the k-factory homepage that it may not be able to be installed in some cases when the Fender Eliminator is installed. After the product arrived, we tried fitting it to the Active Fender Eliminator Kit before installing it on the motorcycle, and as expected, the top edge of the Titanium Plate interfered with the Fender Eliminator Kit, and the Fender Eliminator Kit was not able to be installed. (Bolt holes do not align) It turned out that it could not be installed as it was, so the height was adjusted by inserting an aluminum collar on the Fender Eliminator Kit side. (Modification to lower Bolt hole) I was able to install it
The reflector bracket was ordered from k-factory and fits to the titanium plate EXACTLY, and the reflector body is an OEM transplant.
The small logo like the aluminum plate shown in the pictures of k-factory and Webike's homepage is not included.
View detail
Fits: Others Universal
A little Accent
[How is it used?
License Plate Attachment
How was your experience with it?
Number is a good fit.
Point and hang of installation
You need two Spanners, so be prepared.
View detail