Reviews
In order to make the position of a Mirror on either side parallel, it purchased, but it will be meaningless if not attached for opposite. It was slightly serious to have interfered with the pure Parts of the circumference of , as a result a Handle, a
In order to make the position of a Mirror on either side parallel, it purchased, but it will be meaningless if not attached for opposite.
It was slightly serious to have interfered with the pure Parts of the circumference of
, as a result a Handle, and to have tightened a Screw.
View detail
[Webike Monitor] The price is comparatively strong and it is firm structure. It was able to attach to right Mirror and the almost symmetrical position.
[Webike Monitor] The
price is comparatively strong and it is firm structure.
It was able to attach to
right Mirror and the almost symmetrical position.
View detail
![[NISSIN Repair Parts For Master Cylinder] Mirror Holder](https://global.webike-cdn.net/photo/article/44/1366812881844L.jpg)
[WeBike Monitor] It Bound tight too much and has been divided into two. Special attention is required to a Torque. Since it was its carelessness this time, it is unavoidable. It was not bad at all in product, and carried out. It is a Recommen
[WeBike Monitor] It
Bound tight too much and has been divided into two.
Special attention is required to a Torque.
Since it was its carelessness this time, it is unavoidable.
It was not bad at all in
product, and carried out.
It is a Recommendation at the Accent of the circumference of the
Handle.
View detail
![[NISSIN Repair Parts For Master Cylinder] Mirror Holder](https://global.webike-cdn.net/photo/article/02/1366203063502L.jpg)
It purchased in order to Handle-mirror-ize Ninja1000! Since 1152 was touch as the slightly high kana ? now although the direction besides was written, but there is also no substitute in others and he bought it with bulk purchase 1129 as at a low pric
It purchased in order to Handle-mirror-ize Ninja1000! Since 1152 was touch as the slightly high kana ? now although the direction besides
was written, but there is also no substitute in others and he bought it with bulk purchase 1129 as at a low price as possible, it is the good kana!?
View detail
It is the structure which became brave unlike the cheap Mirror holder seen at an auction etc. only for the product of DRC. It was better when there was a Matte Black!
It is the structure which became brave unlike the cheap Mirror holder seen at an auction etc. only for the product of
DRC.
It was better when there was a
Matte Black!
View detail
It is a YOSHIMURA to APE100. It is use Temp-meter attachment and for Carbon-meter-bracket fixation. although it will be settled shapelier and a leeway will be given also in between Brake levers, if the fixed portion is thin to a slight degree.
It is a YOSHIMURA to APE100. It is use Temp-meter attachment and for Carbon-meter-bracket fixation.
although it will be settled shapelier and a leeway will be given also in between Brake levers, if the
fixed portion is thin to a slight degree.
Safely, since use, appearance, and field-of-view nature are not bad to fixation, either, it is satisfied with it.
View detail
Fits: その他
Although Mr. Craftsman's Mirror holder thinks that it is a little expensive, a structure Anodized etc. are one of the things satisfied dramatically. Since the variation in an Anodized has many brembo main parts, only the point said that a color may
Although Mr. Craftsman's Mirror holder thinks that it is a little expensive, a structure Anodized etc. are one of the things satisfied dramatically.
Since the variation in an Anodized has many brembo main parts, only the point said that a color may not suit just is regrettable.
View detail
- Although NAVI was attached to the Handle part, since fine angle adjustment was not completed, although the Cycle Pivot base of a RAM Mount is set, purchase. Although and the RAM Mount itself used the established Mirror attachment part, since it in
- Although NAVI was attached to the Handle part, since fine angle adjustment was not completed, although the Cycle Pivot base of a RAM Mount is set, purchase.
Although
and the RAM Mount itself used the established Mirror attachment part, since it interfered with the MASTER part by my Motorcycle, attachment was completed using the Mirror holder and NAVI became easy-to-use.
A Mirror holder is beautiful finishing although structure of a RAM Mount is rough touch.
(Photographs are a Mirror holder and the Size comparison of a RAM Mount)
View detail
He bought it in order to attach to YZF-R125. Even if it calls it , it is not the purpose of use as a Mirror holder. It is for using as a its original work Step of a Side stands this time [ ]. The Motorcycle which had ridden until now [
He bought it in order to attach to YZF-R125.
Even if it calls it
, it is not the purpose of use as a Mirror holder.
It is for using as a its original work Step of a Side stands this time [
].
The Motorcycle which had ridden until now [
] had a Step in the Side stands fundamentally, while it had been the posture which rode, it was easy to take out a Side stands, but though it was regrettable, it was not in R125.
thinking, this should be able to use a Handlebar-related Parts! and making a Step on one's own using a Mirror holder, since it was around 22 mm when the outside diameter of the
Side stands was measured -- it happened to have thought.
A Motorcycle is in the place where such DIY(s) are made as Idi, and, also happily, there is.
All of Motorcycles cannot be enjoyed only by riding!!
View detail
![[NISSIN Repair Parts For Master Cylinder] Mirror Holder](https://img.webike-cdn.net/catalogue/daypic140709/36206_1_l_TS.jpg)
[Webike Monitor] It is not for Mirror attachment this time [ ], Jupiter It purchased in order to transfer the Control switch for Navigations to the position nearer to the thumb using Tech-mount ZZZ-0257 and GALE SPEED Tank-stay Type4 for the improv
[Webike Monitor] It is not for Mirror attachment this time [
],
Jupiter It purchased in order to transfer the Control switch for Navigations to the position nearer to the thumb using Tech-mount ZZZ-0257 and GALE SPEED Tank-stay Type4 for the improvement in operativity.
Since it was not able to move to the position which considered though it was regrettable, it is not used.
View detail
Since there was no Mirror of a time to the left by which it came at hand in my KDX250R and there was also no hole to which a Mirror is likely to be attached, this product was attached.
Since there was no Mirror of a time to the left by which it came at hand in my KDX250R and there was also no hole to which a Mirror is likely to be attached, this product was attached. View detail
right and left -- since Mirror attachment was lost as Idi in the circumference of a Handle as for both -- purchase. I also regard texture as comparatively good mono-か of the gadget (smile) price where the angle of a Mirror also becomes free
right and left -- since Mirror attachment was lost as Idi in the circumference of a Handle as for both -- purchase.
I also regard
texture as comparatively good mono-か of the gadget (smile)
price where the angle of a Mirror also becomes free and which is improved also upside down.
It is good if only a few is already small. --
View detail
Although I regarded every vehicles as shifting little by little, since Sole was not pleased, the position of the Mirror was purchased. First of all, since width was thin (about 10 mm), a Lever was not shifted substantially. (It shifted about 5 mm).
Although I regarded every vehicles as shifting little by little, since Sole was not pleased, the position of the Mirror was purchased.
First of all, since width was thin (about 10 mm), a Lever was not shifted substantially.
(It shifted about 5 mm).
Since
right and left were equalized easily, it is satisfactory.
View detail
although its own Motorcycle was not suited and it was not able to attach, I think that it is quality considering the price -- too many regrettable therefore. . .
although its own Motorcycle was not suited and it was not able to attach, I think that it is quality considering the
price -- too many regrettable therefore.
.
.
View detail
Although I had ridden on ttr125, since [ with little Space of the circumference of a Handle ] attachment of a Mirror was difficult, it purchased. Since the function which misses a Damage at the time of the fall is attached, I who often fall find it u
Although I had ridden on ttr125, since [ with little Space of the circumference of a Handle ] attachment of a Mirror was difficult, it purchased.
Since the function which misses a Damage at the time of the
fall is attached, I who often fall find it useful.
View detail
![[NISSIN Repair Parts For Master Cylinder] Mirror Holder](https://img.webike-cdn.net/catalogue/daypic140709/36207_1_l_TS.jpg)
[Webike Monitor] Since the Cowl was removed, it purchased for the Mirror move. Since it was the Separate handle, there are no Spaces, such as a Mirror-clamp Holder, at a posterior matter, it used effectively for the existing Parts, the Mirror cou
[Webike Monitor] Since the
Cowl was removed, it purchased for the Mirror move.
Since it was the
Separate handle, there are no Spaces, such as a Mirror-clamp Holder, at a posterior matter, it used effectively for the existing Parts, the Mirror could be transferred, and it was saved.
View detail
[a Webike Monitor] -- -- it is considerably made by the Compact. The price is also cheap and a Recommendation.
[a Webike Monitor] --
-- it is considerably made by the Compact.
The
price is also cheap and a Recommendation.
View detail
It would be five stars if colors are black or silver. It is like a champagne gold, it is hard to suit with a motorcycle.
It would be five stars if colors are black or silver. It is like a champagne gold, it is hard to suit with a motorcycle. View detail
It purchased to its original work ETC Stay fixation. as it is, finishing comes out and it is quite worse than the thing of P company so that it may understand also with the photograph of description of item. It will not be bad if it uses in the place wh
It purchased to its original work ETC Stay fixation. as it is, finishing comes out and it is quite worse than the thing of P company so that it may understand also with the photograph of description of item. It will not be bad if it uses in the place which does not go into eyes directly. View detail
Since the Bar handle was used, it purchased. To Mirror attachment, it is satisfactory.
Since the Bar handle was used, it purchased. To Mirror attachment, it is satisfactory. View detail