Reviews
With this I am relieved
D-TRACKER (98) There was only RightMirror from the time of second-hand purchase so I bought it to fit regulations.
RightMirror has a mounting hole in the vicinity of MASTER but Left Side has no holes so I bought two of them. With Quantity : Pair (for Left and Right) Mirror was installed in the same place.
It became easier to check after Left.
View detail
OEM Product ぽ い 感 じ
Used as Handlebar Mirror Holder of Z1000MK?.
Although it was good to divert Brake and Clutch holder for ZEPHYR,
Since the position of the Mirror of the Left Side is inclined forward according to the angle of the Clutch lever,
Quantity : Pair (for Left and Right) The angle of RoseRose turned out to be bad.
I liked the shape which does not feel uncomfortable to the old car and I liked it, according to Image
Quantity : Pair (for Left and Right) I'm satisfied with Mirror becoming a Symmetry.
View detail
There are various advantages.
OEM is integrated with Lever holder and Mirror Holder, but you can separate it by attaching it. It seems like extra Parts just to increase the weight of Handlebar at first glance, but there are various advantages.
Even if you change the angle of Lever as you like, the Mirror angle is always fixed.
Mirror position is high and visibility is improved.
Spanner does not hit Brake fluidCap when removing Mirror.
Because it suppresses the switch housing, it can protect the inner dowel without sliding at the time of falling, and can continue to use broken ash.
etc. It is. For those who self-propelled and who remove Mirror at practice, it is recommended that detachment become easy.
View detail
The texture is slightly subtle ....
Originally I used the same thing for Right Side so I bought it together but it is not good to say the texture clearly. People who care about texture recommend Tanax and DAYTONA.
Performance as Parts has been fulfilling firmly. I can recommend it because it does not gap or break. Moreover, it is a bit thinner than DAYTONA and Tanax, so this is recommended for people who are in need of Space.
View detail
Clutch side, required processing
With the ZA-9R E type becoming NAKED, Quantity : 2pc. Purchase Set.
Although there is no discomfort with almost the same color shade as the OEM color after the above model change over the years, on the Clutch side Screw Pitch is different so we installed it by File.
However, Mirror installation angle, or Quantity : Pair (for Left and Right) Care must be taken because the Lever angle will not be delicately matched.
As it is still running, it is an important part so we recommend that Left Side also be fitted with exclusive items matching Screw Pitch.
I am satisfied with Large change regarding products.
View detail
Processing required for installation
Left Mirror Holder breaks at high speed. Last time, RightMirror Holder is broken so it's the second time. Is it due to the vibration of KATANA. Select from OEM's Nisshin. When I install it, the hole does not match delicately. OEMRepair Parts I'm dissatisfied with Large. The previous thing was a long hole and fine adjustment was possible. Is this also Reduction in cost? Be careful when purchasing. View detail
Rather than changing MASTER
Because of FirMASTER's Mirror installation loss, I will try to introduce it.
It's not better than nothing, because I do not need Mirror.
If I have patience and do not have Mirror, I will be caught by the police and this place is where I should endure Gold.
View detail
Cut-out is the best built-in.
XR100MOTARD 145cc It is installed in full Custom.
Mirror Holder is required, and when we searched on Wee Big's site, I decided on this product.
Because Mirror Holder is a part that should not stand out.
However, there is no difference from other Custom parts.
This product made the color Black, exquisite sense of cut-out feeling and exquisite, compatibility with other Parts is also the best.
The price is also reasonable and I think that it is the highest Rank in Mirror Holder.
Easy to install, no graffiti, you can firmly install.
If you are looking for Mirror Holder, this is a Recommendation item.
View detail
Do you take lightness or take freedom?.
I bought it with EasyAdjustClutch. Holder type is also available. Although there is an advantage that angle adjustment can be done freely here, it is quite heavy. I could not try it, but the Holder type may be lighter and maybe better. View detail
It is not possible either.....
With ZX-14R ABS bush hanging
I used it for processing ClutchReserver tank
Outside the mirror section
It is the same shape as the OEM, but the color tone is different
It is a little disappointing.
View detail
Anodized defect
There was Anodized defect like Black Stain.
There is also more visual importance when purchasing with performance emphasis so how about this one. I want a solid quality.
I installed on DJEBEL 250 XC, but Mounting Bolt is M5. I'd like to exchange Bolt eventually, but for reference.
Bolt used is M5, Length is 25 mm and 20 mm. Since it jumps out for a long time it looks X
OEM uses 15 mm, but with this product it is likely to fall off Bolt's shallow light.
It looks nice, but Anodized does not seem to like Jita as usual.
View detail
I changed the screw thread and replaced it.
Every time I go to the forest road at SEROW, I removed Mirror, the threads got damaged and I replaced it. The price was also cheap and easy to install! It was thin and so it was possible to install around a relatively narrow Handlebar! View detail
Without mounting Mirror
I just found a good one to unify Silver around Handlebar.
It was perfect as it does not take Space.
I was also solidly making
View detail
MirrorHandlebar clamp broke
Since the reflection of Right Side Mirror was strange while driving on expressway, it touched Mirror. Looking closely, Clamp was broken. KATANA is a Motorcycle with low vibration, but it is not clear that Clamp breaks. Vibration of KATANA. The front wheel Brake is RadialPump of brembo, but Clamp was using Universal Product.
Change to brembo this time. The reason for choosing is that the Body color is the same, the thickness of the Clamp part is thick and it seems to be strong. Neck is expensive. As for quality, bremboMark is also included and it is a satisfactory thing.
View detail
You can firmly fix it.
Mirror 's Screw acceptor has broken, so I replaced it with this item.
Mirror Holder has Type that receives Mirror right above Handlebar and Type before this product but I wanted to bring it close to OEM so I bought this product.
Amazonetc. I also thought of a no - brand item that I'm selling at, but I wanted to fix it soon I did not want to lose the money of buying goods so I bought this item and was right answer.
View detail
kdx125
Purchased for repair of kdx 125.
Good points, I can firmly make it.
Since the product is Small, there is a degree of freedom in installation.
It can be attached to any Motorcycle.
There is no particular bad point.
View detail
Used for installation of Digital meter on Handlebar
I bought it for installation of YOSHIMURA oil temperature Meter instead of for Mirror. Without products that are quite easy to handle, this product is clamped to the Handlebar and Meter is set. Meter comes in exactly good position and it is easy to use.
It is handy because it is also free to tilt to prevent reflection. it's recommended!
View detail
Steady making
It is a solid making.
It is the difference of cloudy mud with super cheap analog products sold at certain Oakonjo.
First, because it withstands the vibration of the vehicle, Mirror will not be blurred out.
View detail
Accuracy is good
Really good accuracy.
Certain ok etc. It is very different from similar super-discount items in.
Painting can not be peeled off by lightly hitting the tool.
However, it is expensive ....
It is luxury goods ...
View detail
BremboMark is good
I bought it when I bought bremboRCSRadial master. MASTERBody has no place to attach Mirror, so it was OK even if this was not the case, brembo's Mark liked it! View detail