Reviews
Fits: KAWASAKI NINJA H2 SX, KAWASAKI Z650, KAWASAKI Ninja650, KAWASAKI VERSYS-X250
color coordination
It became the Point of the entire body color. View detail
The paint is ….
I ordered Black, but the Wound is terrible. I thought I would get it replaced because it was full of paint cracks and Small scratches, but it was a pain in the ass, so I Repaired it with Compound and installed it.
The paint was cracked by tightening the Handlebar Post, and the paint was peeled off by sliding the Axel Holder. And the price is higher than Buffing.
The handlebar shape and riding position are 30mm up from normal, so it's easier to ride and I'm happy with it, but the paint should be purchased on the premise that it will be painted by itself.
View detail
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI SV650, YAMAHA MAJESTYS, SUZUKI GSX-S125, SUZUKI GSX-S125, SUZUKI GSX-S125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX, HONDA PCX, HONDA PCX
I don't have any complaints, but...
I bought this for mounting the Smartphone Holder on the Mount.
It was easy to install, but I felt like I had to tighten it halfway.
I had a USB port installed when I bought my new car, but this USB port got in the way of the installation process and I had to move it around a bit.
If you want to have more room for installation, we recommend you to buy the Handlebar Brace with adjustable length.
View detail
Fits: HONDA ADV150, HONDA PCX e HEV, HONDA PCX, HONDA PCX160
Mounted on PCX160
I bought it for the dress-up.
Because of the model change, Front and Rear are now Disc brakes, so I installed the for PCXBrake lever for ADV150.
Installation is easier than the previous MODEL because you just remove and replace the Bolt without any problems.
The Adjuster function allows you to adjust the grip to your liking.
The color of the Anodized is good and I like it, and it is a part that can be seen even if I am driving, and there is a custom feeling because it is a part that stands out from the outside.
The three bolts on the brake lever were replaced by separately purchased bolts from Silver to Black.
View detail
It works for me.
Installed on PCXJF81. I replaced it to ride slowly.
After the replacement, I rode 50km to work and back, and the motorcycle became a different thing. It is very easy to ride and I am not tired anymore.
I'm glad I replaced it
View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB, HONDA CL250, HONDA CL500, KAWASAKI Z650RS, SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI GSX250R, SUZUKI V-STROM250SX
Satisfied
I bought this product because I wanted to wear the Smartphone Holder and the watch, and in the case of the CT110 HUNTER CUB, the Smartphone Holder etc. became a good position, and it is easy to see and I am satisfied. There was a time when my hand became numb by the vibration when I drove a long distance, but I want to confirm whether there is an anti-vibration effect by driving a long distance in the future.
It was very easy to install the Bolt without straining the Handlebar because it is a special product.
The texture and paint job look solid.
I am satisfied with this product because it is cosmetically superior to similar products.
View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB, HONDA CL250, HONDA CL500, KAWASAKI Z650RS, SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI GSX250R, SUZUKI V-STROM250SX
I do not feel the texture
I bought this to mount my watch on my CT110 HUNTER CUB
I chose this product because of the low price, but the texture leaves a little to be desired!
I have no problems with the installation and the accuracy of the parts is perfect, but the surface of the Center bar, which is the most visible part, is textured and feels a little cheap.
I think the price is right for this area.
View detail
Fits: HONDA GROM, SUZUKI V-STROM250, SUZUKI GSX-S125, SUZUKI V-STROM250, YAMAHA MAJESTYS, SUZUKI GSX-S125, YAMAHA MAJESTYS, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, SUZUKI V-STROM250, HONDA PCX150, SUZUKI GSX-S125, HONDA PCX150, SUZUKI SV650
Handlebar vibration reduction
[How is it used?
I bought this to reduce vibration on my Handlebar.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It was easy, I think it took about 5 minutes to install.
How was your experience with it?
The vibration seems to have become less pleasant. It is convenient to attach a portable Holder.
[Included Parts:were they on?
It's not attached.
[Was there anything that disappointed you?
Nothing.
View detail
Fits: HONDA GROM, SUZUKI V-STROM250, SUZUKI GSX-S125, SUZUKI V-STROM250, YAMAHA MAJESTYS, SUZUKI GSX-S125, YAMAHA MAJESTYS, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, SUZUKI V-STROM250, HONDA PCX150, SUZUKI GSX-S125, HONDA PCX150, SUZUKI SV650
Mis-designed Products
Although it is a thing of MAJESTYS conformity, it sticks when installing However, it is not a surface contact with the Handlebar installation part of the Clamp part, but a point contact This is a product that can be installed However, as an industrial product, it is a very suitable product because it gives priority to universalism Japan's Manufacturer has fallen Too bad, Endurance View detail
Fits: YAMAHA NMAX155, HONDA Forza300, YAMAHA NMAX155, YAMAHA NMAX, SUZUKI SWISH, HONDA MONKEY125, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX e HEV, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, YAMAHA NMAX, HONDA LEAD125, HONDA LEAD125, HONDA LEAD125
Parenthesis OK
Handlebar width is wider than OEM, there was a little uncomfortable feeling, but I got used to it soon The bolt was long when I installed it Bolt was long and impatient when I installed it, but I got 5mm short one at home center and The installation is complete The color and texture are the best? View detail
not quite
The Brake lever does not fit the Brake leverSaddle when it is attached as it is, and the Brake lever goes up and down The file was applied to the Saddle half of the body to make it thin View detail
Fits: HONDA Forza Si, HONDA PCX125, HONDA PCX150, HONDA CBR250R (2011-), HONDA CBR125R, HONDA CB250F, HONDA glom, HONDA PCX125, HONDA PCX125, HONDA DIO110, KAWASAKI NINJA250R, HONDA CROSSCUB , HONDA Forza300
Shoddy stuff that's not worth talking about
When I installed it, I dipped it in water according to the instruction manual, but as soon as I completed the installation, one of the ends was torn off It's gone Maybe there was a small scratch on the item or something 。 By the way, there were no scratches on the brake levers because the car is new 。 I bought it for its good looks, but it was the worst piece of crap I've ever seen 。 If you want to remain as a Custom PartsManufacturer for many years to come, you need to make sure you're ready for the future Get your head out of your ass and make sure there's quality control! View detail
Fits: HONDA MSX125 (GROM), HONDA MSX125 (GROM), HONDA MSX125 (GROM), HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX HYBRID, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA MONKEY125, SUZUKI GSX-S125, YAMAHA MAJESTYS, YAMAHA MAJESTYS
Attachment abundant
While installing, I lost Bolt by losing it and I was despairing, but there was exactly the same thing at Home center and I got a jobless thing.
It is equipped with Smartphone Holder and Drive Recorder, but it can be used without problems.
View detail
More than OEM quality
Hopefully even the removal of the OEMHandlebar is easy to install.
The length Bolt stopping the OEM's Bar End Weight is like a screw thread is a loose stopper shape?
I do not loose with Driver, I finally loosened it with an Impact drill plus + Bit and nearly an hour of fighting.
The new Handlebar was able to be installed as it was precisely fixed around the Switch.
Bending of Pipe is cleaner than crimp and not crushed than OEM, polishing of the surface is like finish like Chromium Plating.
Although it seemed like a shoulder shoulder in OEM, the whole width is a little narrow, the angle is also narrowing, so we expect that Position will be improved. (It is not running yet)
View detail
Fits: HONDA CB250F, HONDA Forza Si, HONDA PCX125, HONDA ZOOMERX, HONDA CB600RR, HONDA CB400F, HONDA CBR400R, KAWASAKI NINJA250R, HONDA CB650F, HONDA CBR650F, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CB1100, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA 400X, HONDA VTR250, HONDA VTR-F, HONDA CBR250R (2011-), HONDA CBR250R (2011-)
ENDURANCE Master Cylinder Holder B
Excellent quality and durability!!! this pieces are well made to last. They give a great handlebar view and the looks is very outstanding from the original piece. View detail
Fits: YAMAHA NMAX, YAMAHA NMAX155
The quality is very good
There is no complication such as installation, quality etc.
However, it was good that the point closest to the adjustment range comes a little closer.
I was able to match the color to the car body color, so ◎.
View detail
Fits: HONDA EM1e, HONDA CROSS CUB50, HONDA CROSS CUB, HONDA Dio110, HONDA CBR125R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX eHEV, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX160
Lever grip
Brought it to use better grip for brake lever and clutch. Not easy to install. During install need use some trick to put in lever. Comfort and nice looking View detail
Fits: YAMAHA NMAX, YAMAHA NMAX, YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX155
It is a good item
It looks pretty good from monotonous Black's OEMLever.
Easy to exchange and compare favorably with the position of OEMLever, the shape has some corners, but it is also rounded
You can use it without discomfort.
View detail
Fits: YAMAHA NMAX, YAMAHA NMAX, YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX155
I think that it is a good product
In the Brake lever which does not need Adjuster adjustment, the texture - Design seems to be very good.
Because the shape is almost the same as OEM, it seems that it can be used without discomfort!
View detail
Good for color Accent
Since Z125PRO SE is only Black when viewed from the top, I chose Blue's Color.
It is good feeling that Color is Accent ♪
View detail