Reviews
The texture and the effect are as good as brembo!
As for the OEM brake of ADV150, I'm satisfied with the large rear brake and control, but the front brake is not so effective.
I replaced the front with this Brembo caliper and I am very happy with the large.
The effect that I was dissatisfied with came to work firmly.
The OEM shoddy looking Caliper now looks very high quality with the Red bremboLogo.
About Controlability.
Since it is used for town driving, it is not aggressive enough to Control, but I think that it became better to a certain extent.
The Caliper piston diameter is now larger, but the MASTER is still OEM, so the lever grip is slightly larger.
It feels like I'm holding 5 where I used to hold 4. Maybe that's where I'm mistaking it for better Control.
Anyway, the price is inexpensive and the effect and texture are much better and I am Large satisfied.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA XS650 sp, YAMAHA SR500, YAMAHA SR400, YAMAHA XS650 sp
I like Caliper.
Unlike cp2696 and GRIMECA, this Caliper has a Dust Seal, so you can get a long maintenance cycle, and there are repair parts such as Seal, Pad and Pin. The best thing is that it doesn't squeal easily. View detail
Front Caliperbrembo
Replaced the front Caliper with a brembo.
Quantity:Pair (for Left and Right) I swapped Bleeder Bolt and Banjo on one side because it was the wrong way around.
Caliper support is made by G-Craft for Tricity.
The brake line can be installed without any modification.
View detail
brembo is cool!
Bought this for my tricity 155 for Rear.
I used the old Crab for the OEMBrake hose handling.
Brake hose routing is fine, but air bleeding is not possible without removing it.
(Banjo and Wheel are in the way and Spanner can't get in)
If you use OEM brake hose, you need to prepare a short Banjo bolt.
(for BremboPitch1mm, normal long bolt is too thick for OEMBanjo to tighten all the way)
Brake works better than OEM with a solid Touch.
Happy with how it looks.
View detail
Brake still needs to be strong enough
I found a bracket to mount this Caliper to the Indian/Scout and have been wanting to put it on one day and finally installed it the other day.
BridgeBoltβMaterial:I've replaced it with a custom Titaniumium Bolt.
Satisfied with both efficacy and fee ring.
I used to use four fingers, but now I can do the same brakes with two fingers, which made it very easy to do.
View detail
It's better than the previous product.
I thought about the gold color, but I have no regrets. The color is very pretty. It looks sturdy and I like it. It is much prettier than the gold color that has been sold for a long time and I like it. I haven't installed it yet, but it looks like it can be used for a long time. It's so pretty and it's more reliable than Bram. about gold and decided No regrets, the color is very pretty Looks solid and I like it Than the gold color that has been sold for a long time Much prettier and i like it I haven't installed it yet, but it looks like it can be used for a long time. It's so pretty and it's more reassuring than Bram. translated by Google Translator View detail
Simple and cool!
It's getting close to overhaul time for the rear caliper.
I took the plunge and replaced it. (*´∀*)
The look is simple yet luxurious and outstanding.
The brake line handling changes as well.
It's a cool, modern motorcycle look. (Translated by ω-) b
Performance-wise, it's not much different, for better or worse.
If anything, it's the lack of braking power that makes it hard to lock up.
Controlability seems to be good.
It's inexpensive for the quality and I recommend it cosmetically!
However, the floating kit for installation is expensive.
View detail
I'm doing my job reasonably well.
The one currently in use leaked oil, so I decided that a distortion of the body had occurred because the leak did not stop even though I replaced Seal, so I purchased it for renewal.
The performance of the OEM parts is very different from that of the OEM parts, because the OEM parts did not stop at the high speed corner approach at Izu Skyline. After the change, the same Breaking Point can be used for the approach with no worries.
View detail
Fits: YAMAHA XJR400, YAMAHA TZR250R, YAMAHA TZR250, YAMAHA TMAX500, YAMAHA FZ6-N, YAMAHA FZR400RR SP, YAMAHA FZR400RR, YAMAHA FZX750, YAMAHA R1-Z, YAMAHA TZ250, YAMAHA FZ6-S Feather, YAMAHA SRX600, YAMAHA SRX400, YAMAHA RZ350R, YAMAHA RZ250R, YAMAHA RZ250R, YAMAHA FZR250R, YAMAHA XJR400, YAMAHA TZR250
The BrakeTouch was generally as expected.
Although I was dissatisfied with the heavy braking touch in the Normal caliper, I changed to this one and obtained the subtle touch which was in the operating range of Lever with NISSINRadialΦ19Type in conjunction with Brake master, and it became easy to do control. However, the grip seems to have become a little deep and I think it is even better when there is an extra finger's worth of room. There are no complaints about the braking ability. View detail
The size/presence is fantastic!
I replaced the OEM Rear caliper on my ZEPHYR750 with a Brembo crab.
The reason for exchange is because Size of OEM Caliper is too Large and the surface had become tattered by aging deterioration.
"Nagisa Sports brand's Caliper support.
I think it was about $8,000.
Caliper support is also available from other manufacturers, but it is about 5 times more expensive because it is a torque rod replacement type.
As far as installation goes, it worked fine.
In this case, I'm using OEMBrake hose.
It's pretty pathetic, but it works fine.
It's not beautiful to look at.
As for the performance difference with the OEM Caliper, I have the impression that the brembo is less audible than the OEM Caliper.
I'm happy with the way I look and feel.
View detail
Reliable performance and chic looks
i wanted to switch to bremboCasting, but I used Gold's Caliper in another car before The Gun meta color is used to blend in with the motorcycle because the look of the bike doesn't feel right
I made a single disc with the Rotor of SUNSTAR, but it is controllable and braking Enough power
The looks are great, and the chic is right on target
I wish I could choose a color for the same price as Gold
View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 MkII, KAWASAKI Z750FX, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 MkII, KAWASAKI Z750FX
Look good!
It was considerably cheaper than installing a brembo It is easier to handle than the Brake of NORMAL View detail
It's harder to lock
SUNSTAR 230mmRotor and Quantity:I replaced it with Set Compared with the previous state, it is easier to control Brake and harder to lock It is a very good feeling on the road of Kunekune
All the shims from the Caliper center that came with the product are used Clearance is finally secured
The footpegs may need to be adjusted because the bedal has no play (I prefer to play 0.)
View detail
Brembo P2 34
Item not authentic. Does not come with original packaging. Missing the banjo bolt and crush washer. The serial number on the item is badly written. Missing authenticity card. Very disaapointed. Would like a refund on the item. View detail
It looks good
It's heavier than the OEM Nisshin More than that, it improves both Touch and Feel
I like the fact that the pad is divided into four sections
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSXR1000, SUZUKI GSXR1000, SUZUKI TL1000S, SUZUKI SV1000 S 03, SUZUKI SV1000 03
If you don't care about it, just the fact that it has a brembo makes you feel superior
I asked the Shop to install it When I didn't get a hit, I was scared that it was a Brake that didn't work, two and a half I think it will come out around the time Change After all, there is a sense of presence Moreover, it may be the effect double if it is made MASTER of brembo It was View detail
I didn't know..
I've been using brembo sandcasting for over 20 years now, but this time I'm using the sand I bought this one because Casting had a RACINGbremboLogo in it
The fearless image of the RACINGbrembo is still very cool
When I replaced it, I thought about Cut-out's Racing caliper, but I used STREET The maintenance is too weird and too effective to show its performance, so I'm not sure if it's worth it I choose STREETCaliper
it's cheaper to replace the brembo sandcasting than to overhaul it, in terms of cost & hellip; that may be an overstatement, but it's a very cost performance It's a high i.e. high i.m
However, the one with this RACINGbrembo logo in it is about 1.5 times more expensive You don't …
That's how valuable it is to brembo, or maybe it's a BrandImage
In that sense, the cost performance is a bit lower, especially for RACING If you don't have any attachment to it, I recommend the Logo one from STREETbrembo
And this is the first time I've used a brembo from Sandcasting for over 20 years "BreedBolt, When "Banjo bolt will be replaced …
Oh...
View detail
worth it
Although it worked if it clasped in OEM, it has sense of uneasiness because it is different from other owned Motorcycle and too much Touch, and dare for Touch dare to purchase with the same Piston diameter as OEM.
Obvious from the PinSlide formula to the opposite formula Touch made it Snap.
Also, since Brembo caliper has never seen rust sticking to Piston, it is also highly valued.
Because I would like to go through the forest road, Hose dare to exchange as a new OEM.
View detail
The appearance was refreshing
With the exchange of Wheel OEM Caliper can not be used and replaced. Although it was clear and looks lightweight, it is often said that the street braking power that is often told is low even after Atari arrives.
Master Cylinder is 14 mm, Rotor diameter about 250 mm can not be used as Brake for braking. (Looks like for posture adjustment?)
It seems there is a feeling of incongruity if people who use Rear on a daily basis.
View detail
It is a gem without a mistake
【What made you decide the purchase?】
Design, tradition, performance
【How was it actually used?】
Things of the same item are in use
Once used, OEM can not be satisfied
【Was it difficult to install? (Hard parts case)】
I think it's easy
【Please tell me the point of installation and hang (in the case of Hard parts)】
We need centering by Support Manufacturer
[Is there anything I was disappointed about?]
nothing special
【Hope for Manufacturer ? Please let me know if there are any improvement points]
Please allow us to purchase the necessary O - Ring when dividing
【Have you compared items?】
None
View detail