Reviews
Concerned about strength?
I purchased and installed the Japan Government Certificated Ikazuchi Exhaust System at the same time.
I was a little worried about the strength of the Japan Government Certificated Silencer, because it is heavy and it shakes a lot when I shake the Silencer.
View detail
![Exhaust Hanger[Exhaust Bracket] + Footrest Blank Plate Kit](https://global.webike-cdn.net/photo/impression/97/97bebd0433edd4f1ffadbaa1f5c53c85L.jpg)
Fits: KAWASAKI ZX6R, KAWASAKI ZX6R, KAWASAKI ZX6R, KAWASAKI ZX6R, KAWASAKI ZX6R, KAWASAKI ZX6R
Focus on appearance
When used in conjunction with the Single seat cowl, the Tandem Footpeg is eliminated, giving the Rear a tighter, more Race ish look.
However, depending on the Silencer, you may get a little Gap.
The hole is a little large for the bolt, so you can adjust it there.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
The atmosphere of Frame and Exhaust Bracket is Exactly.
I went with the frosted Black to match the Frame as shown in the photo, but the actual product is a careful Material:Polishing.
It is for removing Tandem Footpeg, but Aluminum Collar is included so that it can be shared with Tandem Footpeg Plate of K-FACTORY.
This product is made of aluminum pipe which is bent nicely to match the design of the frame, so it is a good product if you want to match the atmosphere of the frame and exhaust bracket.
It is not a point of caution, but unlike the NORMAL, the Bracket is facing the Exhaust System in a straight line, and it is more visible than the Heel plate. If you have large feet and ride on your toes, or if you are using the Rear Sets, you may want to stain your heels while riding.
Then there's the laborious Material:Polishing has been done, but the weld marks are quite noticeable, so it would be great if this bracket could be polished before shipping.
View detail
MONKEY Exhaust SystemExtension Bracket
If it is produced with an emphasis on appearance, it is a little disappointing.
The Hexagon Bolt comes out of the Large Exhaust Bracket.
View detail
It's cool, but …
If you put a helmet on the helmet holder, it will hit the Chain Cover or Tire.
It is natural to say that I removed Tandem Footpeg.
It's a street riding Motorcycle so unfortunately I had to change it back.
The thing itself is good, though.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Exhaust Bracket
I bought it because I removed the Tandem Footpeg.
The installation was done by Yoshimura, but even the OEM unit comes with no problem.
View detail
![[Repair / Optional Parts] Silencer Bracket](https://global.webike-cdn.net/photo/impression/d6/d6e383ef97d4e69641e18e0c6939b469L.jpg)
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Quintessential AKRAPOVIC!
This is the product of AXIS La! The OEM Exhaust System and the Parenthesis are perfect, but the price is too high … but it is one of the products that can satisfy the owner's feeling! 。 The installation does not require any special tools as it is just a replacement for the OEM Passenger FootpegBracket, but it does require a tool (star shaped) to tighten the bolt that stops the exhaust system, so you will need to check your tools before purchasing.
The Torque for the bracket is 27Nm, which is a very high Torque value, so make sure you put some effort into it. Just be careful not to lick the bolt, and make sure the tool is tight. If you are not sure, after tightening the bolt, you may want to use a mackie or marker to mark the bolt and clasp vertically to make sure the bolt is not loose. I hope it will be helpful for you.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS Cafe
I only wanted Right.
I used it as Exhaust Bracket without footpeg, I only needed Right, so it is not cosmetic.
The design is good, but the dimples on the valley side of the bent part are noticeable depending on how the light hits it, which is a little disappointing.
Weight is 530g OEM/290g Product (without Step) (Right only comparison)
The unused footpeg mounting hole is not cool, so I plan to plug the cosmetic bolt.
View detail
![[Repair / Optional Parts] Silencer Bracket](https://global.webike-cdn.net/photo/impression/5f/5f858a705b1ddb9ed3f7473ed9d51448L.jpg)
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Complete Bolt On
Perfect compatibility with the OEM AXIS La Exhaust System! I was able to install it without any trouble. …But you need Torx wrench because the Bolt is Torque (star shape), so you need to be careful. View detail
I think it's a good product.
I used it to put the Takekawa Exhaust System on my MONKEY!
It works fine and I can recommend it.
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG
It looks and feels like Psycho, but …
Although I had attached CLRExhaust pipe, I had fixed it with Lady Bird's Exhaust Bracket until now, so I purchased CLR's exclusive product. In the picture of the installation example, Bracket is fixed at the angle of the Rear suspension and Large body parallel, and it seems to hang Exhaust System, but if it is that, because it was Clearance that the sole of the shoe seemed to touch Tail Pipe at the position of Rear Sets that I have attached I made the angle of Bracket a little more downward to secure the clearance. Although I am satisfied with the beautiful and sturdy Aluminum Bracket, the shake of the Exhaust System at the time of Idling becomes large and the vibration sound of the Exhaust Spring becomes CHALYCHALY and worrisome than the time of Lady Bird's Bracket. The vibration sound of the exhaust spring is CHALYCHALY (sweat). I will cover the spring with anti-vibration rubber in the future. View detail
Very good
I think the fitting and texture are good. I was able to install it without processing etc., but I don't know because I didn't install the OEM Exhaust System. View detail
Installed on AXIS Labo Exhaust System
I bought this Bracket for my Trickster to install on my AXIS Labo Exhaust System.
I wasn't sure if it would stick, but I pushed the exhaust system up a little and installed it...
The result... It's on.
We do not recommend diversion, so please do so at your own risk.
View detail
![[Repair / Optional Parts] Silencer Bracket](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0251/24232620_1_TS.jpg)
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
Fits to Normal muffler
Exactly fits the AXIS Lab Bitch in NORMAL. Other company's products are expensive or the design is not so good.
It fits without a problem because it is the same manufacturer.
View detail
Fits: SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750, SUZUKI GSR750
Silencer Bracket
I bought it because of its simple design.
The SCORPION Exhaust System was used, but the position of the exhaust system was not correct, so a collar was placed between the bracket and silencer.
There are some bender marks on the product, but the production itself is solid, and if you think of it as an overseas RaceParts, it is a passable product. The position of the Gap is correct, so I think it is just the compatibility with the Silencer. The product is a Bracket Only and there is no bolt or color, so you need to prepare by yourself.
I am satisfied with the Design, but I feel the Gold price is high. (It's an average price for a Bracket). 。
It is aluminum, lightweight, and I like the color because it looks OEM.
View detail
Towards Single
In putting on the Single seat cowl, I also want to remove the Tandem Footpeg!
It's also an Exhaust Bracket though…
It was the closest to Image that I could find, so I bought it & installed it.
It is supposed to be a special product, but even Normal muffler had Gap in the hole position.
Tighten it while watching the Bolt3 Balance and you're done!
However, the Bolt on the Exhaust System side cannot be diverted because the OEM is a half screw.
I used the m8 20mm because I added the anti-vibration Rubber.
It looks great!
The vibration of the exhaust system seems to have decreased.
View detail
It looks better now.
I bought this to remove my Tandem Footpeg.
Material:I don't think there is any concern about strength etc. than Aluminum.
With the GSX-R125, I think 225mm would have been a better fit, but Clearance managed to get it to fit, and it looks good now that it is slightly raised.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200
image
I couldn't post a picture in my last impression, so I'll post it here. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200
Installed on ZrX1200 DAEG
This is the impression after using it for about one year after purchasing and installing it.
I installed this Lady Bird's Aluminum Exhaust Bracket on my previous ZrX1100, and it was good parenthesis. I think the surface is Aluminum with Buffing, but even if I polish it well, it is oxidized to white. It is a single rider spec. to replace the normal tandem stepBracket on the exhaust system side, but the shape is good and the parenthesis is good. It is Recommendation.
View detail
Fits: BMW RnineT, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Racer, BMW RnineT Scrambler, BMW RnineT Pure, BMW RnineT/5
Overall, I am satisfied with this product.
I am satisfied with the quality and strength of this product, although there are other companies' products with better design.
Because it consists of a plate-shaped frame, there is no chatter while running, and I feel that the stability is very high.
View detail