SAITANIYA Motorcycle Reviews

Filter

Write a review and get Webike Points!

Reviews

SAITANIYA Turbo Filter Clear all

Seat Plate And Seat Base For Stock Seat Cowl

Mounting Bracket For Hyper Front Cowl (Center Headlight)

Universal Hyper Front Cowl Center HeadlightL Black Gel Coat

SAITANIYA

30 Jan 2019

Rear Fender

Fits: HONDA VTR250

Japan User(translated)

3/5

It's the best parenthesis and most practical for VTRs

Since the rear suspension was replaced, I installed it to prevent contamination

As the title suggests, it looks like a Gal arm and Parenthesis is good
It has a Chain Guard and of course a Sprocket Guard

It's rare, but it's possible to get your toes and hands caught in a fall and have them amputated, so it's a must in a race It's a safety measure, so it's better to have it on public roads than without

Because of the length of the Fender itself, mud splashes are suppressed considerably, so the rear suspension It's very helpful because it makes it harder for me to get dirty

Installation seems to be easy if you remove the Tire, but I had to take it off
If you jack up from the rear stand and the bottom of the engine, the suspension will extend to meet the Tire It gives you more space in the vehicle and you can manage to install it without having to remove the Tire

You don't have to remove the rear caliper as per the instruction manual, but The Hose Clamp must be removed and floated once

It is important to note that the clearance of each part after installation is narrow and the quantity:Pair (for Left and Right) If you don't check the centering of Fear
Recommends checking and adjusting the chain extension as well

After installation, put the engine on once in the state of being raised in the rear stand and let the Tire idle Check whether chain and Tire are not interfering with Axel on/Off (This is the biggest thing.)

I didn't cut corners and because I didn't do it, I just bought a test run and Chain interfered with it out of nowhere Some of the holes have been left out (Lol) View detail

Single Headlight Enduro Racing License Plate Cowl

SAITANIYA

05 Jan 2018

Tank Cover R1-Type

Fits: YAMAHA YZF-R25, YAMAHA YZF-R3

Japan User(translated)

4/5

I am satisfied with the product quality. However, it is costly to include paint.

【What made you decide the purchase?】
Mr. Gendaiya has sold a set of R1 Type Cowl for R25.
But I do not want to change everything altogether, "If you look closely it is something different from ordinary R25?" I wanted to do about Makeover. So Tank Cover, which is easy to return to original even in the unlikely event of pricing as well as partly, was sold as Single Item, so I decided to install it.

【How was it actually used?】
First of all, if it says comprehensively, "I'm glad you changed it." I felt it..

<About products>
Other Company ProductCowl is not so high in experience that it is hard to wear it ... (?) but,
In this product, there was no Gap in the position of the screw hole, Tank cap position, etc., and it was possible to mount it almost without machining.

When you install it, the image of the car body changes more than you thought.
If you can see the photos, you can see that the width is wider and the depth is longer compared to the OEM, I feel like the volume of the car has increased.
Especially, the difference when seeing from SIDE is Large, it is subjective, but purely "It's cool!" I feel it..

<Use feeling>
This is also subjective, but the Large has changed.
The reason is that due to the increased depth "The seating surface has become narrow" And, it is the feature of the biggest Large "From the part where the crotch gets hit, the design across Tank cap is close to right angle" is.

As the seating surface narrows, the seated position inevitably becomes closer to the rear, and the body is in a forward tilted posture.
From the part where the crotch hits to compensate for it, because the design through Tank cap is close to orthogonal
It makes it easier for you to deposit your upper body on Cowl, reducing the burden.
I thought it was well thought out Design.

【Was it difficult to install? (Hard parts case)】
As mentioned above, the accuracy of the product was high, so there was no difficulty to that.
If you can desorb Cowl, I think there will be a lot of hardship.

Also, when wearing Cowl, the part surrounded by the red circle in the figure (Quantity : Pair (for Left and Right) Both) Grommet is required.
I think that it is better to order OEM Parts Number at the same time.

【Please tell me the point of installation and hang (in the case of Hard parts)】
Relationship of Cost reduction, Omnibox of R25 which is thin as a whole and feels unreliable, but on the other hand this product is made tightly, and it gets a sturdy impression.
I feel that it is solidly made, but because it is built as tightly, "Wrinkle" There are also people who are a little confused because it is difficult to do.
This side (Seat) From the side, back (Handlebar side) I think that you will be addicted cleanly as you slide it into.

【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Because of Hard parts, none.

[Is there anything I was disappointed about?]
It may be because I do not have processing technology,
There is a gap between Tank and Seat. It is caution when rain, car wash, etc. take water.

Overall accuracy was high, but there was a fairly large gap, which was a shame only for that point.

【Hope for Manufacturer - Please let me know if you have any improvement points]
It is how to sell, but Painted (OEM color) I'm glad if things of Lineup are also done.
Especially since it seems that there are many Blue in YAMAHA, it seems that popularity will come out if you join one of Lineup.

【Have you compared items?】
nothing special.

[Others]
The image of this product is Painted's one.
My car body was Blue, so Paint the paint shop (Blue monochrome) When asked, the Gold amount was about 25,000 yen with shipping fee.
So, the Gold amount you spent with Total is around 45,000 yen.
For your reference.
View detail