Reviews
Fits: APRILIA RS125, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA RS250, YAMAHA , TRIUMPH DAYTONA675, APRILIA SL750
I went with Gold...
I bought it to go with the rear stand, but I think it would be fine with other Manufactures.
The color jumps with age when exposed to the sun, I think the same for the others.
If so, I'm glad it was inexpensive.
View detail
I can't give it to you without it. It is a must buy!
I bought this Option to use the Jay Trip , Low Roller stand (item #:JT-1052QR).
"V-receiver, 2." They say.
To begin with, I did not purchase STAND out of necessity, but I purchased YOSHIMURA's Rear Stand Bracket Set for VSTROM250SX. (M8) I had been putting on the Option (Option 1) for the time being, so I bought this Option because I had seen it being used with the Jig Sur which is almost the same as the Option (Option 2) and I thought it would be good.
As expected, it worked properly.
However, if you don't use it well, the red rubber part on the end may come off, so it seems that you need to get used to it.
I am a novice when it comes to STAND for RoadMachine, so I will do my best to familiarize myself!
View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
good
Since it is the same Manufacturer as STAND.
Because it is not as flashy as other Manufacturers.
View detail
Easy to insert into Fork
When inserting the STAND into the front fork hole, the STAND tip bracket is inserted at an angle,
It is a little hard to get into the holes. Once it is up, it is fixed perfectly, but it takes a lot of time to insert it into the two Fork holes.
View detail
The product is good, but..,
The quality of the product is very good, as it is made in Japan. However, the contents of the package, especially the tires and other components, smelled like cigarettes and filled the storage room. It is a pity because the product is so good. View detail
good quality
Purchased as an addition to the company's Roller stand.
I don't have to tell you about the fit and consistency. I have used it without any complaints.
However, it seems that a protruding part has been added, but I have no idea what this is for...if anyone knows, please let me know.
View detail
Combination with SNIPER
I purchased the SNIPER Racing Stand Hook for my 2019 ZX-10RR.
STAND-UP has also become easier.
View detail
I'm not sure when it was lost.
I bought it because one of the four was gone and the other was cracking.
It explains that double-sided tape makes it harder to remove.
If so, I wish they would put it on from the beginning.
It was a hassle to put it on, so I used Vinyl Tape to prevent it from coming off.
View detail
Slightly disappointed.
[How is it used?
Used in YZF-R6 (2019) with V-receiver.
I am new to buying Rear stand but have rented a Short from J-TRIP.
Was the one you received as per Image?
It was heavier than I expected, but not a problem at all.
The large size was as shown in the image, but it is still large compared to the short size.
How was your experience with it?
It is easy to raise and lower, and although I was worried about the short version, I made the right choice by choosing the long version.
However, even with Short, Stand for Beginner was easy and did not require much strength.
The screw holes are too large or the bracket is wobbly even when the bolt is tightened firmly.
[Points to note]
In the case of the V receiver, even at the lowest setting, it floats about 4 cm, so a little force is required to raise it.
If you want to raise it with light force, it is better to choose Stand for Beginner because Stand for Beginner will be in a lower position.
View detail
Buy just in case
I bought it to use when the balance is bad and vibration occurs because it is a Tire hand gummy, but I don't care about the vibration with Mini circuit because the speed is low, so I don't use it for now. View detail
Fits: DUCATI Panigale 1199/1098(rear)/1198/STREETFIGHTER1198/Deer Bell MULTISTRADA 1000DS1200 MONSTER S21200/Setc., DUCATI Panigale 1199/1098(rear)/1198/Streetfighter 1198/Diavel Multistrada 1200 Monster 1200/S etc., DUCATI Panigale 1199/1098(rear)/1198/Streetfighter 1198/Diavel Multistrada 1200 Monster 1200/S etc.
Short and unsettling, but functional enough.
[How is it used?
For home maintenance and custom
Was the one you received as per Image?
As per Image
How was your experience with it?
Shaft is short and I'm afraid it will fall out.
[Points to note]
Nothing in particular, as long as it fits the diameter of your car model.
How did it compare to other products?
This price for one Shaft seems high, but I have no other choice.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
Anodized or DURACON?
I bought DURACON because using Anodized Hooks inevitably results in Anodized peeling and scratching after use.
I purchased the black color and the scratches from use are not noticeable, but the black color is turning white due to sunburn.
In this respect, the White color may not be noticeable.
It is simple, so it does not have the same dress-up effect as the Anodized version, but I like the simplicity of the smallest necessary limit.
View detail
Required when removing Tire.
I usually use Stand for Beginner.
When you remove the tire, you are using a V-bracing system, and it is nerve-wracking when you are handling a heavy motorcycle. If you're not careful, you'll end up on the ground.
View detail
I knew it was a special product...
[How is it used?
I purchased this product because I needed it for front maintenance of my Grom JC92.
Was the one you received as per Image?
The color was as I imagined, but the color was only Gold (Black at the time of sale?), so I thought it would be better to replace it...
Was the installation difficult?
No problem, just plug it in.
How was your experience with it?
This is a special product and can be easily lifted up by simply inserting it into the round hole at the bottom of the Stem. However, it is recommended to check the hole when inserting it to avoid hitting the Special Knife boss on the body....
[Included Parts:were they on?
No, sir.
[Was there anything that disappointed you?
The construction of the product is perfect, but I feel that the price is not commensurate with the quality.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I've been wondering whether I should buy a JT-113 or a JT-116 since I bought my first Grom, but I decided to go with the JT-113 because I have a JT-116 that I've been using for a while. The JT-113 is fine for maintenance around the wheel and brake, but for overhauling the front fork, the JT-116 and the SPECIAL Knife boss are better, so I decided to use this one. Also, I think the price is still too high.... If the price was at least 3,000 yen, I think everyone would buy the Grom Owner without hesitation, but what do you think? Also, if there were more color choices, it would be more enjoyable.
View detail
State the dimensions.
Nowadays, I don't understand the sensibility of selling such attachments without stating the dimensions.
The product itself is not particularly problematic, but depending on the condition of your Swing Arm or Hook, the Rubber cover may fall off every time you raise or lower it, which may be annoying.
View detail
Hard to buy, bulky, frequency of use
First of all, as a premise of Large, it is difficult to purchase OnLine anyway.
If you are a beginner, I would recommend Unit or DAYTONA products as there is a normal chance of buying the wrong one.
There's nothing in particular that makes it superior because it's a J-TRIP. I think it's almost like everyone just buys it because it's the only one they know.
There are a lot of maintenance stands overseas that are very well made, but they are all bulky, so the cost of transporting them tends to be high, and the selling price is not cheap either, which is a difficult thing for an island country.
View detail
Doesn't have to be Jtrip, but...
[How is it used?
I bought this to put a Key on my Motorcycle.
It doesn't have to be a JTrip, but I chose it because it has a hook and looks like it can be fastened to a belt.
It is an Image that is clumpy because it is quite thick leather.
Was the one you received as per Image?
It was as Large Image.
How was your experience with it?
It's kind of messy because the key is on the large size lol.
However, from the background that I dropped Key by my carelessness once, I purchased this Key Holder in order to be able to install it on myself.
By the way, the leather was made by DEGNER.
[Points to note]
I have a bitter memory about Key Holder, I lost all my keys when I was wearing a Key case. Even if it is a little tough, it is better to buy the one of a solid make.
View detail
Parts for Rear Stand
outline
V receiving bracket for JtripRear Stand.
Reason for purchase
I decided to buy J-trip's Rear Stand, but the receiving bracket was sold separately. There were various shapes, but the V type seemed to be stable, so I bought this one.
Bundled items
VReceiveBracketQuantity:2pc. Set
How to assemble
Just insert it into the Rear Stand side and tighten the Knob on the Rear Stand side, so it's easy.
how to use
There are many different types of Brackets available for different models of vehicles and brands.
ZX-10R (2021) But STAND (JT-125) and Hook bolt (JT-107D) combination to secure the brake lever and prevent the vehicle from moving.
I didn't know which direction the V receiver was facing, so I checked with videos and HP etc. and installed it.
The STAND was placed near the Swing Arm, and while holding the rear of the vehicle with the Left hand, the Right hand adjusted the position of the STAND so that it rested on the Hook bolt, and while holding the rear of the vehicle with both hands, the STAND was applied by stepping on it with the feet.
After lifting up, the position of the V receptacle was not so good, so I lowered it once and adjusted the position of the V receptacle by loosening the Knob, so I have the impression that the adjustment is a little complicated.
Impression used
It is necessary to adjust the width direction of the V receptacle at first, but once it is adjusted, it is relatively easy to use thereafter.
Improvements
When I unloaded the car, the rubber for the protection of the V receiver came off with both sides of the car. it was written in the instruction manual, so I think it is easy to come off.
V-ring mounting orientationQuantity:Pair (for Left and Right) It is easier to identify the Body so that the
View detail
good
I bought this because I was running out of Weight left when I replaced my Tire.
I found it a bit surprising that JTrip, famous for STAND, was selling Wheel's Balance weight.
However, since I usually use STAND of JTrip and feel the goodness of this brand, I think that honestly Weight is the same no matter what I use, but I chose this product this time because I wanted to use the one of the brand that I put my trust in anyway.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
Bad weld spatter marks.
[How is it used?
Installed external Stand Hook on MT-07.
The Hook is very low, so it was introduced to reduce the force required to Lift.
Was the one you received as per Image?
Unlike the STAND receivers I've purchased, there are so many weld spatter marks that they are unsightly.
A bit of a shame
How was your experience with it?
I was able to lower the Lift amount considerably by using this.
Short roller stands can also be lifted with one hand.
(Originally, you had to put your full weight on it to Lift it)
[Points to note]
Depends on the make of car.
I think that in many cases, the width is not enough unless it is STAND of Wide Type.
(Because I use about 30mm of One Side in Crank part)
View detail