Reviews
If the body and the screw part are ball joint, it is full marks.
The SS series Full Cowl Motorcycle is very difficult to find the right place to install it when considering the vehicle inspection (position, visibility, etc.). Even though the body is small and stylish, I didn't want to use unattractive brackets or adapters. The Normal blinker mirror which is already hard to see and is in the way was made into the Bar end mirror, and the KIJIMALED Blinker was made into the OEMMirror mounting hole.:It is the 959 Panigale that I had set up (I rejected the thin blinker made overseas by NRC because it doesn't pass the inspection and the visibility is bad), but I still felt dissatisfied with the shape and the largeness of the blinker and challenged the direct mounting of the Cowl of Kellerman! There is no flat surface that can be installed facing straight ahead in the range that conforms to the vehicle inspection.
So I decided to use the bolt hole (5mm diameter) at the junction of the upper cowl and the side cowl, but since the length of the bolt part of the Blinker Body is not enough, I had the 15mm extension adapter of the Option processed and somehow managed to install it. So I got the optional 15mm extension adapter and installed it somehow. It protrudes a little from the cowl and faces inward a little, but it seems to be no problem for visibility. For the time being, I will ride with this for a while, and if I find a better way or position, I will change it. Well, it's something that no one but the owner will know unless you tell them, but that's the nature of custom lovers.
When the Blinker became small and stylish, I wanted to change the Bar end mirror to something a little more small.
I think that the installation is relatively easy because there are various mounting adapters with the option. I think it is a product that can be recommended.
View detail
Fits: Others microS, Others RhombusS, Others Bullet Atto
Good accuracy and texture. It was very useful.
I wanted to mount Barrett's Atoe directly on Cowl, but the length of the screw part was not long enough and I gave up. So I used this Adapter by shaving off the black part and extending the screw length by 5mm.
This is a great product and I am very happy with it. If there is such a thing - it is a product that can reach the itch of the User. In my case, I used it as a processing Base, but when it comes to make from scratch, I will give up.
I wasn't going to use it at first either, but I thought maybe it would be nice to have, so I bought it at the same time as the BlinkerBody.
It's not an expensive part, so if you don't plan to install Barrett Ato, you might as well buy it.
View detail
Fits: Others microS, Others RhombusS, Others Bullet Atto
Good accuracy and texture. It was very useful.
I wanted to mount Barrett's Atoe directly on Cowl, but the length of Screw part was not long enough, so I modified the Screw part of this Adapter (extended the Screw mountain by 5mm to the black part) and used it.
It is indeed a dedicated Option part. There is no sense of discomfort when connected. If only there was something like this! I became the processing Base, but if I were to make it from scratch, I would have given up. If you use it, you will feel the gratitude of many times of the price.
At first I wasn't going to use it either, but I thought it might be nice to have, so I bought it at the same time as the BlinkerBody.
View detail
Kellerman Blinker
Small and inconspicuous, it's good?
I think it's a lightly smug Blinker.
View detail
very good
My car is a FATBOY by Harley-Davidson, a 2019 model. I bought this for KELLERMANN microS turn signal. The design of the turn signal bracket is very reasonable, and there is no need to adjust the angle after installation. The workmanship is also very good, and it is very sturdy to use. ---------------------------------------------- My car is a Harley-Davidson FATBOY, 2019 model year. This is in order to buy KELLERMANN microS turn the lamp. This section flasher brackets design is very reasonable, after installation do not how to adjust the angle. Work is also very good, with them very strong . Powered by Google Translator View detail
very useful
My car is a FATBOY by Harley-Davidson, a 2019 model. After riding for a while, I changed the turn signal to LED, but something went wrong. When the turn signal was turned on, there was a fast flashing phenomenon. Later, it turned out that a relay was needed. Then I found this KELLERMANN on webike. Connect the wires according to the instructions and the effect is effective, and the flashing speed is normal all at once. ---------------------------------------------- My car is a Harley-Davidson FATBOY, 2019 model year. After riding for some time, the LED turn signals replaced, but the problem, turn signal, when there was a flash phenomenon, and later turned out to be a need to check the relay. Then on webike to find this KELLERMANN, follow the instructions to connect the line was quite effective, flashing speed suddenly normal. Powered by Google Translator View detail
Beautiful and practical
My car is a FATBOY by Harley-Davidson, a 2019 model. The front steering of the original factory was too big, and I didn't think it looked good, so I replaced this KELLERMANN, which is known as the smallest steering light in the world. After seeing the real thing, I found that it was really small. At first, I was a little worried about the brightness. After the installation, I found that there was no problem with the brightness, and it even felt brighter than the original factory. ---------------------------------------------- My car is a Harley-Davidson FATBOY, 2019 model year. The front steering and other original too, that does not look good, so he changed this KELLERMANN called the world's smallest turn signals. After seeing the kind found in very small indeed, there is the beginning a little worried about brightness, brightness after installation no problem was found, even brighter than the original feeling. Powered by Google Translator View detail
Fits: HARLEY-DAVIDSON
Cheap and practical
My car is a FATBOY by Harley-Davidson, a 2019 model. I bought this connecting piece for KELLERMANN, which is known as the smallest turn signal in the world, Bullet Atto. For beauty, spray it black first. It is necessary to adjust the angle during installation to achieve the best effect. ---------------------------------------------- My car is a Harley-Davidson FATBOY, 2019 model year. This sheet is connected to buy KELLERMANN called the world's smallest turn signal, Bullet Atto used. For aesthetics, first spray it became black. The installation of the required adjustment to the angle in order to achieve the best results. Powered by Google Translator View detail
A little pricey, but the world's smallest is very attractive
I chose Blinker because I wanted a product that would be compatible with vehicle inspection and would be as discreet as possible
I'm very satisfied with the presence of the normal (off) light because it's close to Zero and there is enough visibility when the light is on I am
You may need to be a little careful about the fact that they are sold by the unit of 1pc. and that Wiring is thin
(I don't think it will break if you work carefully.)
After purchasing this product, I got a slightly larger Blinker from KIJIMA (NanoSeries) is now available For your reference
View detail
Almost Blinker reply
The existence of Blinker is bothering me because I customized SR400 to the BMWR75 (WW2) style It was installed because it became
I asked the shop to install it, because they said the WiringCable is quite thin He said it was a little nerve-racking
When I had it installed, I couldn't see where it was attached at first glance, so I had to find out where to install it It was as Small as you can find
It's bright enough in the light Visibility is definitely better than the oddly thin Blinker, and it's not a problem at night or even in backlighting in the daytime It shines just right
If you don't want to stand out from the Old Style or Blinker, I definitely recommend it The rest of the time I'm worried about how long they'll last, because the price of one is so high, and the expense when it breaks is a little tight I felt it, but I definitely recommend it if you want to make it Refreshing
View detail
At first glance, it looks like a blinker reply, but will it pass inspection?
important item
[Was there anything that disappointed you?
No, not really, but I'd have to say the price
A little cheaper
However, if it's cheap, people will put it on (laughs)
Do you have any wishes or improvements you would like to make for the Manufacturer?
Japanese Vehicle Inspection Correspondence It comes with paper, but it would be helpful to have a sturdy one that you can put in your Wallet like a card
[Do you have any products to compare it to?
I had a problem with the Sequential Blinker from DAYTONA
The one and only Small Japanese Vehicle Inspection Correspondence has been given the nod
How was your experience with it?
When it's not shining, it's definitely not noticeable in size, but when it glows, it's quite bright and has a lot of light Even in the daytime, you can ride with a great presence and peace of mind
As for the vehicle inspection, I showed the DMV the paperwork that came with it and it went through perfectly
Was the installation difficult?
The small size makes it easy to put it anywhere
[Overall Rating]
Even in the daytime, the visibility is excellent, and you can actually go through the inspection at the DMV with the attached documents Large Satisfied
View detail
It's called the world's smallest blinker, so it's a pretty small blinker!
The world's smallest blinker, and it complies with vehicle inspections (EMark) So, it's a pretty small piece of work, and it's very high in light!
It's installed and looks Refreshingly different
The construction is also solid with the Aluminum Body
View detail
Lousy quality control that is not worth the price
purchased 2 pieces to mount Barrett Atoe to rninet Handlebar
However, one of them did not come with a Screw for securing the Blinker
This price was pricey for just Mount, but there's no other alternative I bought this product because it was a German manufacturer and I trusted the quality, but I was betrayed by the It was
The cheap Chinese Manufacturer is still more solid
I thought he was a high priced, high quality manufacturer, but the minimum inspection You can't help but feel like you're being ripped off if you can't even get enough of it
The manufacturer's Blinker is also included, and compared to rizoma Parts:Low level for Large, low price, lack of parts, lousy packaging, etc I won't be buying any more products from this manufacturer as they are unworthy
View detail
Unique Size Feeling
Small fingertip-sized Japanese vehicle Inspection Correspondence is bright enough to surprise you 。 But Wiring didn't say which one is Plus and which one is Minus, which is a shame View detail
inconspicuous
I was looking for an inconspicuous blinker that would pass inspection and would not be noticeable, so I bought this one I bought it in conjunction with the Harley Bracket for HARLEY, which is very small, but I had the Bracket made as it was not available I haven't passed the car through inspection yet, but when I looked at the ManufacturerHPetc It looks strong View detail