Reviews
Bag and Quantity:Set and practicality at its best
The bracket on the underside could have been made a little more parenthesis. I attached the CenterCarrier bag for SUPER CUBCROSS CUB of the same manufacturer, and it went on without any problem. View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB
I think it was a little small!
[How is it used?
Purchased with the expectation of wind protection for city driving and short distance touring.
Was the one you received as per Image?
It was exactly what I saw in the product listing, but I wish it were a little larger in size.
Was the installation difficult?
The installation was done by downloading the installation instructions on the Net.
But the installation itself was not like living in a house.
How was your experience with it?
As you said, the wind to the chest seems to have improved, but the wind seems to come to the upper side from the bud root
I wish it had a little more height, but I wonder if there is a special incense for front calipers... I don't know, I haven't actually put it on.
[Included Parts:were they on?
Included Parts:was attached.
However, since it was attached to the Seat, the adhesive glue stuck to the Bolt and Washer, so it took a little time to take the picture.
[Was there anything that disappointed you?
The Bolt and Washer included with the Seat are installed, so this is not RoseRose II, but the items included with the Bracket were packaged in one bag, so it is not RoseRose II.
I thought that if they could have done the same, they wouldn't have lost it.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Bracket is not that difficult to install, but the Bolt on the Headlight side must be held down when removing the Bracket and the Bracket must be attached to the Quantities.:I thought it would be better to Set
The left side of the body (brake lever side) has a meter in the hand, so there is a possibility that the washer may drop a little, so we need to be careful.
think
It is better to be careful and watch so that there is no gap when the washer is temporarily fixed in place.
View detail
Oil catch tank
It looks good
However, water accumulates so quickly that it is not enough.
Perhaps it is just a tube.
You have to clean it frequently.
We believe it will be effective and we will use it.
It was difficult to install the hose, but I was able to do it myself.
View detail
It's awesome!!!
Not only does the front-to-back position change, but the side stand is positioned a little further to the left, making the support much stronger. However, the downside is that the support is unstable with the original side stand, so you have to shorten the original side stand or install an adjustable side stand like I did. If you adjust it well, you can park stably on any road that slopes to the left or right. In fact, it would be enough to give it 5 stars, but since I am not satisfied with the combination with the original stand, I give it 4 points. -------------------------------------------------- -------- Instead of simply changing the front and rear positions, the side stand is placed a little more, and the support is very strong. However, the disadvantage is that the pure side stand is anxious. If you adjust it well, you can park it stably anywhere on the side of the road. In fact, it is enough to give five stars, but the combination with the genuine stand is not satisfactory. Powered by Google Translator View detail
It takes hang to tighten.
With a diameter of 22mm, it was installed on the Pipe of SP Mukawa's Carrier.
I had to bite down on the Rubber to tighten it, but it was very hard and difficult.
I think the role as Helmet holder is not a problem.
View detail
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250
Casually Guard
I didn't want to have a LargeGuard, so I purchased this product. View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
Stable even with heavy Rear
It is difficult to remove the Bolt and Nut of the OEMSide Stand, but the Bracket itself is easy to install.
The feel after installation is good. The STAND is located at the rear, but it is not difficult to apply.
The stability of the vehicle body with the Side Stand out is unmatched by the OEM.
View detail
Oil catch tank
The installation itself is easy, but the hose is too hard and I had a hard time fitting it. I would like to believe that it is effective, but it is not. View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
Dedicated Bag is convenient
The bag is also Waterproof Specification and uses a watertight fastener, so you don't have to worry about sudden rain.
It is useful for holding simple tools, Touring net, and Cableetc. for recharging.
It does not lose its shape, but if you attach a bag normally, the length of the belt is quite excessive, so it may be a little troublesome for those who take or attach a bag depending on the situation.
I leave it on and I tuck the excess Belt so that it is not visible.
The installation of the Carrier itself is easy.
Since we will also use Crankcase Bolt for Engine, I would like to have at least Torque wrench.
However, the Multi Bar is difficult to see Navigation even if a Smartphone Holder is attached to it due to its position, so I could only think of attaching a Drink holderetc. etc. (I have not installed anything, though.)
Also, if you put too much stuff in the attached Bag when refueling, the open Seat will fall right out of the way.
Personally, I think it is a very good product.
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX160, HONDA PCX160
Fender Eliminator Kit installed
It is an impression of Refreshing with a small number of parts.
Installation Instruction Manual is not included.
I was in the previous MODEL!
View detail
Fits: HONDA CB125R, HONDA CB125R, HONDA CB250R, HONDA CB150R, HONDA CB300R, HONDA CB150R, HONDA CB300R
cb250r is now a handsome man.
I felt the wind much more with Ron Two as soon as I bought the cb250r.
The ninja250 was a Full Cowl, so of course it was equipped with Screen and I rode it without any complaints.
There was also a long size, but I decided to go with this one because of its appearance.
I compared driving without and with the new system, and the difference was totally different.
Like the wind avoided me lol.
Meter is clearly visible.
View detail
Firmly mountable
I am satisfied except that the Bracket, which is tightened together with Fender, is difficult to put on.
Like others in the Review, it needs to be devised!
The SV650 does not have a grab bar, so by adding a rear carrier, a handle was created.
It is now convenient for hanging maintenanceSTAND
No rattling even with the top case attached.
View detail
Fits: SUZUKI Gixxer 250, SUZUKI Gixxer 250, SUZUKI Gixxer SF250, SUZUKI Gixxer SF250, SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250SX
I don't do Power up or anything like that.
Parts that make the back side of the VSTROM250SX's plain black iron Swing Arm look casually stylish.
Well, there is no particular meaning to change it, but I bought it because I thought it would be excellent as Bonsai Parts.
It can be changed by simply removing the lock nut, so let's just call it an easy parts replacement! Backslide (^o^) /
View detail
Fits: HONDA CBR600RR, HONDA CBR1000RR
It's just the right lever.
I posted this because there were no impresarios at all.
Compared to the OEMLever, there is no particular difference in grip, and the Adjuster gives this one a more Fit feel.
The anodizing is beautiful and I quite like the Endurance engraved on the front.
Fits CBR1000RR sc77.
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX160, HONDA PCX160
Fender Eliminator Kit
It is one of the first parts you want to install when you buy a new car. View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX160, HONDA PCX160
Fender Eliminator Kit
It is the cheapest, but the texture is quite nice. View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-S125, SUZUKI GSX-S125, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI Gixxer SF 250
Thank God!
Tension is increased because it is a dress-up of the visible areas while running.
I would be happy if it were a little cheaper!
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB, HONDA CROSS CUB50, HONDA CROSSCUB110
Downshift on tiptoe
It would be useful to be able to Downshift on tiptoe.
Downshift at the kakato is a little harder to do.
The NORMAL Pedal is a bit of a noisy pedal, so it looks good.
View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB
A classic!
CT110 HUNTER CUB is a classic!
Front carrier. 。 I bought it because I like the vertical one, not the horizontal one. (Sorry for the confusing wording.)
Installation can be done without looking at the Instruction Manual. It is easy.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB125R
Can be used without problems
I think it is not cosmetic, but it is normal. The luggage Hook is so hard to use. View detail