Reviews
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB125R
Carrier with Tandem Grip
[How is it used?
Motorcycle is used for commuting, so it was installed immediately after delivery.
Was the one you received as per Image?
As the Image shows, it is very firm.
Was the installation difficult?
It was easy if the temporary assembly was done according to the Instruction Manual.
How was your experience with it?
Tandem grip is useful when maneuvering
[Included Parts:were they on?
Everything was in order, no problems.
[Was there anything that disappointed you?
There is none
Other items that would be helpful
The installation points and hang points are to make sure to perform the temporary assembly according to the Instruction Manual and to make sure that the bolt on the Both Sides of the car is not damaged.
It is quite hard, so use a firm tool.
View detail
First Rear CarrierBOX
Unlike the Scooter, there is no storage space, which is also the fate of a naked motorcycle. I looked around to find a better looking frame for the carrier, and chose ENDURANCE because it seemed to have the most strength.
SHAD (Shad) I use it in combination with SH40. Based on the other's Impression, I judged by myself where Screws and Nuts are likely to loosen and put in 6mm Spring washers. I have not yet installed it on my car, but I am looking forward to seeing how durable it is.
Also the Instruction Manual for handling, but it is electronic and I have difficulty reading it, so I used my experience and installed it without the Instruction Manual.
View detail
Suitable for SV650.
The KIJIMA Rear Carrier that I had purchased before broke from the bent part of the bracket. I had a hard time to install it at first, but I found it easy to install after I fixed the collar and washer to the sub-bracket with super glue. When I received it, it was large and a little heavy, but when I put it on, I felt no discomfort at all. I wish I had chosen this Rear Carrier from the beginning. View detail
I had to remove a lot of stuff.
I had to remove the Shift Pedal, Sprocket Cover, and Pivot Collar to get it off.
Once removed, the rest is easy.
I have a ZETA Side StandExtender, which is a special product for JA65, and there was no interference with the Center Stand, which I was worried about.
View detail
Fits: HONDA CBR125R, YAMAHA MAJESTYS, YAMAHA MAJESTYS, HONDA MONKEY125, HONDA FORZA Si, HONDA dunk, HONDA ZOOMERX, HONDA glom, HONDA glom, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA glom, HONDA PCX, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA CB250F, HONDA CBR250R
Good item for monkey 125!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
It's insanely good.
I was in a state of yajirobe with just a light push when I put my luggage in the RearBOX, but thanks to this Bracket, I am FirmlyHold ?.
I was worried about what kind of product it would be, but it is a very thick, hard steel, firmly welded, and I had no concerns about its strength from the looks of it. I was not worried about the strength of the product.
The work is easy if you are only careful when installing the stand switch.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB, HONDA CROSS CUB50, HONDA CROSSCUB110
Downshift on tiptoe
It would be useful to be able to Downshift on tiptoe.
Downshift at the kakato is a little harder to do.
The NORMAL Pedal is a bit of a noisy pedal, so it looks good.
View detail
For those who want a more adventurous feel...
I was thinking that the OEM screen was not long enough in terms of appearance, but I found a screen with a good length, so I bought it.
ADV can be transformed into two patterns, one with the screen lying down and the other with the screen standing up.
The standing Style is slightly easier in the high speed range if you get down a little (slightly).
I like it a lot because it is not too small, not too large, and has a different look and feel compared to OEM.
View detail
Fits: Others , KAWASAKI VERSYS-X250, KAWASAKI VERSYS-X250 TOURER, KAWASAKI Z650, KAWASAKI Z650RS, KAWASAKI Ninja650, KAWASAKI Z900, KAWASAKI Z900SE, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS SE, KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Ninja1000, KAWASAKI NINJA1000SX, KAWASAKI VERSYS1000SE
A decent budget alternative to rearsets
Not being a fan of spending vast sums on rearsets, I do like the versatility of an adjustable Footpeg set up that fits to the oem mounting. These pegs do not disappoint me yet. Fairly easy to install & adjust. The Criss-cross pattern on the pegs provides adequate grip on the wet despite being aluminium. A pity that these are currently the only adjustable peg option available for the z900rs on webike. That said, the price is good. View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB, HONDA CL250, HONDA CL500, KAWASAKI Z650RS, SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI GSX250R, SUZUKI V-STROM250SX
I don't care if it's another ….
There are plenty of other inexpensive ones, but we chose Endurance made with CarrierOthers.
The quality is perfect.
View detail
Together with other Carrier
I wanted to unify carriers with Endurance, so I chose this one.
I think Balance with its lightness and rigidity is the way to go.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
I had made up my mind from the beginning.
The most important feature of the lineup at Endurance
I think this power is the best!
The rigidity of the product is not so rigid.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
For BigFront carriers
I wanted to add a BigFront carrier, so I chose this one.
I used Endurance's Shield in my last car, so I know it's reliable!
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX160, HONDA PCX160
Stylish and cool!
PCXStandard Equipment's Rear Fender was too large and bulky, but this Fender Eliminator has a more stylish, reflective look, and I was very satisfied with the large size. View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB
A classic!
CT110 HUNTER CUB is a classic!
Front carrier. 。 I bought it because I like the vertical one, not the horizontal one. (Sorry for the confusing wording.)
Installation can be done without looking at the Instruction Manual. It is easy.
View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB, HONDA CL250, HONDA CL500, KAWASAKI Z650RS, SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI GSX250R, SUZUKI V-STROM250SX
Satisfied as Custom first step.
Before the installation, my hands felt numb even after driving 50 km one way,
After installing it, my hands are comfortable and not numb even after driving 100 km.
I am happy with this Handlebar Cross Bar, though, as it is my first,
From others. Heavy compared to others." Some people seem to be expressing opinions such as
Personally, I feel more secure with this much weight, so that seems to be a matter of taste.
I also like that it is Firmly and stable even with the Smartphone Holder attached.
View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB, HONDA CL250, HONDA CL500, KAWASAKI Z650RS, SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI GSX250R, SUZUKI V-STROM250SX
Purchase to attach Attachment
I bought this for my CT110 HUNTER CUB to install more attachments in the future. I'm afraid I'm going to spend a lot of money because I can still attach a lot more when I put on the Gear positionIndicator for a start. (Lol) 。
As for vibration countermeasures, vibration is originally Large, but I feel that it has been reduced a little.
View detail
It was a good shopping
The Carrier itself is not too large and is sturdy and of very high quality. The price is a little bit high, but I think it is a good purchase. View detail
dax 125 gear lever
very good quality material. I recommend it, very easy to install and for my personal use this shifting system is more comfortable. since I'm used to my other bikes ------------------------------------------ ---------------- very good quality material. I recommend it, very easy to install and for my personal use this change system is more comfortable. since I am used to my other motorcycles Powered by Google Translator View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB125R
Can be used without problems
I think it is not cosmetic, but it is normal. The luggage Hook is so hard to use. View detail