Reviews
It is subtle
I threw it away because I was too shocked to wear it.
Although it is painting, it is useless overall
Recommendation I can not do this item
I can not recommend it even though I consider Cospa.
View detail
RinPartsSquare Type LED Reflector
This RinPartsSquare Type LED Reflector ProductNo : For 1108419, Lens color is on Red and Color is Red.
(Besides, Lens color is Clear - Lighting color has Red. )
Reflector function and Small lamp function (70% light amount) And Stop-lamp function (100% light amount) 3 functions (with Reflector function) - It is Square Type LED Reflector of RinParts with Small & Brake interlocking type.
Size is approximately 89 mm X 35 mm X 10 mm thick, but when we arrived the product arrived, I felt it was Large as if I measured it beforehand by measuring with a ruler.
I am Quantity : 2pc. Set, backward Quantity : Pair (for Left and Right) As it is attached to it will be a firm Appeal.
Emission area of ??this RinPartsSquare Type LED Reflector (About 89 mm X 35 mm) 24 LEDs per side are lit in the part.
As you try to make it light, you can see that the LED is arranged with a fairly fine Pitch.
It is often finished enough to admire that it can be turned to the market at this cheap price.
Bolt for fixing is M6 and can be tightened with the included Nut.
This RinPartsSquare Type LED Reflector's Reverse side mounting surface part has a rotation stopper Pin so you can use it by drilling a hole in the mounting Base side, but I will also take measures to reduce vibration to this RinPartsSquare Type LED Reflector Based on Cushion (1mm) We installed this RinPartsSquare Type LED Reflector using Double-sided Tape with.
As of now it has been used successfully without any problems, but it is a little uneasy product because there are rumors of Led Base's Solder exfoliation.
It is other than having to break in half a year or a year.
If I do that, I need it from the beginning.
Even if the price is doubled, we choose products that will not break.
Basically it is said that LEDs can be used permanently, but that is not the case.
It is only said to have a longer life span than fluorescent lights, valves and light bulbs.
So, as for this life expectancy for this RinPartsSquare Type LED Reflector, I want at least 2 years or more.
The price of this RinPartsSquare Type LED Reflector is cheap, but at least for 2 years it must be able to be used without any problems - - - Repair and replacement are tough to be honest.
Even if it does not break, if the good part is broken and it takes time and effort to repair it, I want to keep other places firmly in time and time.
.
View detail
Rin Parts Square Type LED Reflector
The luggage Carrier was slightly lengthened by the amount of Stop lamp after the following DumpTrucketc. I got this Rin Parts Square Type LED Reflector as an auxiliary light for the Stop lamp because it got hard to see from a vehicle with a high driver's seat.
Previously, ○ Round Type Stop lamp is backward Quantity : Pair (for Left and Right) We were installing to expand to Crash but because it crashed it crashed, so this time □ This Sin Type's Rin Parts Rin Parts Square Type LED Reflector Commerce Product No : Quantity 1108419 : 2pc. Set purchase using backward Quantity : Pair (for Left and Right) It is attached to.
Although Solder peeling symptoms of Led Base were described in Impression ahead of the other person, I am worried that the story is possible.
(I also experienced with the product of another company. If you sell items that break soon,. )
I believe this Rin Parts Square Type LED Reflector, although I am a little worried, I purchased it.
There was no problem with the lighting test at packaging opening, but in the future running use and long time energization etc etc. With regard to the obstacle of this Rin Parts Square Type LED Reflector in the future it will be an important practical observation from now on.
In particular, my Motorcycle is Off car and I run off-road so I have more vibration than Road motorcycle.
The possibility that the Solder peeling of this Rin Parts Square Type LED Reflector appears conspicuously will be Large.
Indeed, I will try to use this Rin Parts Square Type LED Reflector for a while and then let me report on Impression again.
Even if the goods themselves are cheap, despairing and Wiring is a translation that takes time and labor, so no matter how cheap the price is, it will be troublesome for a cheap and bad product. It is annoying as a consumer.
The installation of this Rin Parts Square Type LED Reflector can be easily installed with the included Nut, and I think that it may be possible to open and attach the hole for the fixed pin to Base, but I am a Double-sided Tape (Cushion material thickness 1 mm) I installed it easily with the included Nut using.
(I have made it easy mounting conscious of the exchange in case of emergency equipment failure. )
I tried to install & run at night, but the function of this Rin Parts Square Type LED Reflector is that the Tale lamp light intensity and the Stop lamp light intensity are satisfactory brightness, the difference of that light also flashes with a good feeling Give me.
It is truly an LED. Valve Sphere etc. Compared with the beauty of clear light with high rectilinearity and fast lit flashing response is preeminent.
.
View detail
Fairly
I purchased Number to relocate to SIDE. Although I think that there is enough brightness, the transparent resin of the LED part is a little cheesy, but there is no problem because it does not look quite like in the vicinity, so there is no problem. I am satisfied because the price is also Reasonable. View detail
It is super-discount, but there is no Zengzen problem !!
It is installation in ZOOMER
At first I was thinking that it would be bad for Sugo because it was too low price, but I have been riding almost everyday for over 3 months since purchase, but Zensen Large is durable
It can not be helped because it is a Blue light bulb, but depending on the angle you see Light is not on, the whole Light will look blue.
If Light goes on it will be a white-like light like a modern day
Although it is slightly uneven compared with NORMAL, it is Recommendation because it surely brightens
I am running with mesh Light Cover, but it was bright enough even at night, and I bought it and was right.
Even if it does not stop, I think I will buy it again
View detail
I am satisfied personally.
Impre this time.
The installation itself is not difficult to do so and it can be assembled without any problem especially with the Instruction Manual. However, a very simple Instruction Manual (How to attach Color of Front wheel mainly) Since it is only attached, let's check the assembly around MASTER firmly.
For Wheel, Fork, Caliper things are not bad and it is satisfying.
About Brake hose, Banjo, Air valve it's kind of like saying something like this.
So, I got some points to worry about.
Brake hose is quite long even at OEMHandlebar. Thanks to illegal handling (Do you understand if you can see the picture)
OEMHandlebar is about 5 centimeters shorter than the attached one? Who is lowering the position of Handlebar with bar handle or the like would be better if you prepared a shorter one separately ...
I can understand it by looking at the product photo, but only one Air valve is attached. Since the attached item becomes a thing of Sandwiching Type with Nut, it may be better to obviously prepare two different types of fit type.
I thought that there were two clearly attached, very troubled. I do not want to take the trouble to remove it from the original Wheel w
Also, if you try to insert air with gasostas etc. before and after Wheel, I think that it is mostly that Inflator's head does not enter because of the shape of Wheel, so it is more convenient for someone who bought the L extension. I do not need it..
Anyway, what I thought is like this.
Personally satisfied!
Since it will be something that I bought a while ago, it is somewhat Spec. Change etc etc. There may be so be worrisome ...
View detail
I was waiting for this kind of thing.
This product was purchased at HP's mail order of Rin Parts.
The assembling also has a polite instruction manual attached, it is possible to install without difficulty. Brightness is alright, I can not return to OEMHalogen anymore
Above all, Design was excellent, I got a punch right after a glance - - - w
Just well, it is said that it is the only defect, it may be the characteristic of the LED, but if it is right angle seen from the Rider, the car ahead seems to be quite dazzling, so I think that it is better to turn it downward a bit. Even if you turn it down somewhat, the brightness is enough.
Depending on the Fender you are wearing, it may be obstructed by the Fender quite well if it is of Normal stay, so you might as well take the risk and make it a Long Bracketver.
View detail
Cheap but good Grip
It is quite cool for the price..
Bar End is integrated but it is okay to save labor
However, I will move a little boyobuyo.
Since various colors are being lineuped, it may be good to buy some color and change it in the mood.
It is recommended.
View detail
I bought it for Long wheel base
I bought it for Long wheel base.
There is no place to complain about this.
I think Cost performance is good..
It is recommended.
If you have lowered Handlebar with Separate handle, you can do it Long wheel base or OEM Length well.
This Length is a bit too long.
View detail
Graduated from KICK of NORMAL's miserable Design
【What made you decide the purchase?】 Since Point of Web! Ke gotten, I changed Kick starter
【How was it actually used?】 I like the color of Design and Black Anodized
[Is there anything I was disappointed about?] nothing special
【Hope for Manufacturer - Please tell me if there are any improvement points】 No particular
View detail
akarui
【What made you decide the purchase?】 Because it is very cheap. I think that LED's Tail bulb is the cheapest.
【How was it actually used?】 It is bright enough and practical.
【Was it difficult to install? (Hard parts case)】 it's simple.
【Please tell me the point of installation and hang (in the case of Hard parts)】 It is together with the normal Valve exchange. However, it is necessary to carefully handle the soldered part of the LED without putting much effort.
[Is there anything I was disappointed about?] There is none
【Hope for Manufacturer - Please tell me if there are any improvement points】 Parties cheap and usable are Large welcome.
【Have you compared items?】 There is none
[Others] Since white of License Plate Light is not included, attention is needed for a motorcycle with a vehicle inspection. Although it is a picture, when I took it on a day with a lot of humidity inside the garage, I feel like a mistreat Rears.
View detail
Easily change to popular Style! But - - -
【What made you decide the purchase?】
Parallel LED Headlight popular with ZOOMERCustom was attracted to the convenience of Bolt-on at a reasonable price.
【How was it actually used?】
On a practical side, it is very bright and you can make StyleChange easily, but again HI of the optical axis / I am annoyed because I can not switch LOW.
Although it is very bright, it is necessary to mount it considerably downward considering the safety of the oncoming car, but it is a waste that the brightness of the corner is not lived (Lol)
I think the appearance is very good with warbone.
【Was it difficult to install? (Hard parts case)】
The Instruction Manual was also attached and it was easy.
【Please tell me the point of installation and hang (in the case of Hard parts)】
I will tighten Bracket with Bolt holding the Fork together, but if you work in turn, one side, one side, Large was durable without having to upgrade the front.
Bolt which fixes LightBody and Bracket is just a little too long, since only the attached Washer 2 species has bottomed out and is gradual, Quantity : Pair (for Left and Right) Already Quantity : 1pc. I added a 6 mm hole Washer and it was able to fix it tightly.
[Is there anything I was disappointed about?]
Although the product arrived first was able to be used, such as being partly cut out by cutting out a part of the product at the time of Gate processing of resin Parts, since Hapa gap product arrived aesthetically, it was exchanged for Web! Ke As a result of having asked Manufacturer to return it by putting it out for inspection, the answer returned from Manufacturer after being kept waiting for quite a long time was very disappointing at the judgment of good product. So web! Ke sent us the inspected products with our own standards, I am very grateful.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I would like to raise inspection standards a little more. As stated below, competing products are part of the first-class Manufacturer. There are so many expensive things, so I sell it cheaper than others so I feel a compromise by many products that this is OK. It is regrettable only for Manufacturer who have very good planning products.
【Have you compared items?】
Headlight kit of certain well-known ZOOMERCustom Shop I compare it with this, but I feel a sense of cheapness, but I feel a sense of high price from the actual product.
[Others]
None.
View detail
Simple and good feeling of lowness in car height!
【What made you decide the purchase?】
It is a compact shape.
Bar end Because of the nature of the mirror, the width of the car will inevitably widen, but for this product it will be the smallest limit.
【How was it actually used?】
Although the specular surface is Small Shark, the convex mirror spec not specified in the item description Spec. Thanks to that the visibility is wide and good. Bar end mirror So, there is a benefit beyond thinking that it can indeed be installed in a good mounting position on the back of the mirror.
It is affordable product but I do not feel cheap,
It's pretty satisfying that it appears more than I had imagined the feeling of lowness in the car height with a simple look.
【Was it difficult to install? (Hard parts case)】
Throttle cone and Grip were both very simple because we were planning to install Bar End and changed to Penetrating shaped objects, but if you have not made any changes etc, please do the processing or the above mentioned corresponding to Penetrating shape Parts Change is required.
【Please tell me the point of installation and hang (in the case of Hard parts)】
To happy newbies, this is also not mentioned in the item description, but Hexagonal WrenchQuantity necessary for installation of this product : 2pc is attached.
Bar End It is a simple hang which is common in products, but at the time of inserting the installation part into the Handlebar, it has resistance to some extent and it is press-fitted and then inserted, lightly Pliersetc. Hold on (Wound, like no deformation) , It would be better to close down with the included Hexagonal Wrench.
Even if you plug in loose state you will continue to spin around Hexagonal Wrench forever.
[Is there anything I was disappointed about?]
It is not something like expectation ...
When traveling at night, than usual Mirror,
This may also be due to the low mounting position of the Bar end mirror, but the light of the following vehicle can feel dazzling.
【Hope for Manufacturer - Please let me know if you have any improvement points]
For the glare that may be caused by the low installation position of the above-mentioned Bar end mirror and the appearance improvement, the mirror surface Blue MirrorVer. I want.
Resin Parts are adopted in the mounting part, but even if it is quite tightened it tends to move due to the low resistance of the resin, so the common Material : You may choose Rubber's things.
【Have you compared items?】
Takatsu Trial mirror (Reverse attachment)
[Others]
None.
View detail
Angle of the bar gives a relax posture on the grip. The finishing chrome are of fabulous chrome with the Knife Cut design giving the slick semi low angles. Length are perfect not too long and not too short where a few clamps of purpose as such Hp mount, G
Angle of the bar gives a relax posture on the grip. The finishing chrome are of fabulous chrome with the Knife Cut design giving the slick semi low angles. Length are perfect not too long and not too short where a few clamps of purpose as such Hp mount, GPS Mount or any other etc mounts acceptable. View detail
It is easy to use and convenient
I do not feel bad texture and I think Simple is fine.
Although the attached Screw may not be enough depending on the model, I think that it is OK because everything can be used with 6 mm Screw.
View detail
Exhaust Cover
It was written for ZOOMER, but Today (af67) I was able to attach it!
Just remove 8 mm Bolt so you can easily change if there is a tool!
View detail
Cospara is good
I feel I got a little brighter than OEM. I think that the durability is down by that amount. I thought that it was a part for people who do not have the opportunity to ride frequently, that there is little running at night. View detail
To ZOOMER's Custom
Type installed under standard Seat Type.
It is very integrated with Blinker and very Parenthesis!
Smoke tightens the tail and the LED glows with a really astringent feeling.
Blinker also blinks in half The unexpectedness is surprising around!
This price is bought with Quality and installation cheapness and Impact.
This Recommendation.
View detail
It is good in the same form as OEM
Buy for ZOOMER Front Disc.
It is good with the same design as DIO's OEM.
Oil tank's position was in the way for my Separate handle.
I think that others can use it for the price.
View detail
To ZOOMER's Custom
I did not have an Orange so I purchased Gold. But it was good as it was quite deep gold.
Since Bar End is an integrated type, it moves after a bunyo buno moves, but it does not matter.
Rather, I am surprised that this quality is at this price.
Satisfaction is high so it is Recommendation.
View detail