Reviews
Probably shoddy
I was able to use it, but the bearing assembly of the rotating part is not right.
The rotation at the time of jack-up is terribly heavy because of it.
As delivered, the grease of the moving parts was dirty and covered with iron powder and dust,
I took it all apart and Greased it up again before using it.
View detail
Fits: Others Universal
Less than six months later, this is what you get.
I bought it because there was room in the mounting area.
I bought it thinking it was made of Gold because it was more expensive than other companies' products, but it was inferior plastic.
Thanks to your help, I was just running, but the bolt of the Cover cracked and shattered from the receiving part of the bolt.
The structure is also bad, so if this part cracks, the Filter will not be routed through at all!
I got fed up with all the shoddy Powerfuls with Covers from all the Manufacturers, so I eventually went back to OEM.
View detail
Don't buy it.
I bought a DID 530VX3 to Crimp an existing Chain to replace the Chain, but the Crimp pin broke off and I could not Crimp it.
I managed to cut the chain by using Leutor to drop the crimp at the end of the chain and then cut it, but it seemed to break.
It was not of the least use and dumped the Gold down the drain.
I bought a similar Tool from Amazon for about 3,000 yen because the parts seemed to be usable, and it broke the same way, so I assume the contents are the same.
I ended up buying DID's Kashimaru-kun and did the Crimp, which is an OEM-specified product, and was able to do the Crimp easily and without any danger at all.
View detail
It does not fit into the other 250 models.
I purchased this for use with Blinker relay, but it does not fit into Relay's Connector.
The shape is 250 type, but it does not stick to Male terminal because the direction of the terminal is 180° opposite to Connector.
It has no use as a Connector.
This ConnectorSingle Body can be used as a Harness, but I don't think that is what a Connector is.
View detail
Fits: HONDA APE, HONDA CUB, HONDA MONKEY, HONDA MONKEY
Poorly made, poor contact
I have used it several times and it is almost certain to have poor contact.
Spring is weak, Lamp side contacts are poorly made, and terminal height is different between hi and lo.
Do not buy this product as it is completely useless and cannot be reworked.
HondaOEMSocket also has many defects, but OEM is better.
View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
Please sell more solid products.
[How is it used?
I was going to order HondaOEM Product for C90 because I wanted to have a meter over 60km/h since I replaced 90ccEngine in my LITTLE CUB that I got. Discontinued. I was told that the product was not rated highly by Webike, so I purchased this product, even though I thought it was not rated highly by Review.
Did you receive the item as per the Image?
It looked OEM-like and nice...but not this.
I'm going to write udderly below, but in a way. As per your Review. The product was not good at all.
Was it difficult to install?
In the era of pure Japan production Iron CUB The wiring around the handlebar is a mess, except for the Second Type Model, which is the most common Injection, and it looks terrible.
The difficulty level is low, so please be patient and follow the Wiring and install it! (And I wrote, but I don't think you should buy it) 。
How did you like it?
Listed in Review Meter stopped working." I have not experienced any symptoms of ... I don't use it that much." It would be more accurate to say that the "new" is a "new".
First, to attach the needle Gold to fix the Meter The claw-shaped part." If you understand the role of this part, even if it is a copy product, you would understand that such a flimsy material is not good enough....
The bulbs that illuminate the inside of the meter are dark & burn out quickly, and are rarely sold at Motorcycle supply stores because they are a different size bulb than the size used in OEM meters since at least the 1990s.
Even before the bulb went out, the Meter was too dark to see at night.
I was so brokenhearted at this stage that I returned to the Normal meter, as I knew from the review that the meter was likely to stop working even more...
Was "Included Parts:" attached?
OEM Product Speed Meter Assembly Similar toQuantity:The Meter is in a Set, with the Meter content bulbs and Wiring built in.
Were there any disappointments?
All of the above is true, and it's more than half the price of what the OEMMeter cost when it was sold, but it's not a product, so it's not a product. Dumping the Gold." I used a Point that I had received in this Review section, so I didn't have to pay for it, but it left me with a feeling of emptiness that all the hard work of typing the text had been lost...
Other items that would be helpful
Point and hang of installation
As I mentioned above, the nails to stop the fixing needle Gold do not function properly, so it will be difficult to install.
[Availability and clarity of the Instruction Manual
No, if you don't know what you're talking about, don't buy it.
However, some may be confused because the color of the wiring is different from that of the OEM Product.
[Notes]
Everything I've written so far. Better not to buy." That being said, I would caution that if you are still interested in purchasing the product, good luck.
[ITEMS TO BUY TOGETHER
A used OEMMeter that you can buy for a price you won't mind paying if it fails."
Disassemble this product and OEMMeter and Quantities:2pc. Set1 (Nicoichi) If we can combine the good points of each other, we may be able to turn it into a good product. (skill & knowledge & willingness to work)
[Opinions and requests to Manufacturer
Now that the Meter for OEMC90 has been discontinued, Don't sell this product! I will not say. I don't care if the price doubles. A product that works well." to the
View detail
Fits: HONDA APE, HONDA CUB, HONDA MONKEY, HONDA MONKEY
there is a problem
However, the base material of the contact point with the Valve is the same transparent resin as that around the Connector, so there may be a problem with the heat resistance of that part, or it may have melted into a sludge and deformed, making it unusable.
The period of use was about six months for weekday commuting use.
Since the OEM was a Black resin material only in that area, I assume that a heat resistant material was used there.
I assume that this product has a delicate Spring function that presses the contacts together or the contacts attach and detach, generating heat, which the material could not withstand.
Just before the damage, the Light was on and off due to vibration.
The contact point on the Valve side had also been cut off in the shape of the Socket side terminal at the Center contact point, probably due to poor adhesion caused by the Spring function.
The spring was stiff at the time of installation, and after installation, it was as if the spring had shrunk to the point of having no stroke.
We are now using OEM and have no problems, so we have decided that OEM is the way to go, even if it is more expensive.
View detail
Defective Reflector
The M6 Screw is bent and the Nut will not fit again. We fixed it by setting up the Tap again. View detail
Fits: HONDA APE, HONDA CUB, HONDA MONKEY, HONDA MONKEY
No wonder the price is so low.
When I installed the OEM parts, the low beam light came on without any problem. I installed the OEM parts and the low beam lit up fine, but the spring inside was weaker than the OEM parts and the contact seemed to be faulty. I guess it is because the price is so cheap. View detail
Fits: HONDA dachshund, HONDA Shirley 50., HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Shirley 70
quality for the money
I purchased this product to use as a multi-reflector, but when I received it, there was an error in the dimensions of the Rim and Lens, so the Lens was uneven and there was a gap between the Rim and Lens. Also, the positioning protrusion of the Valve insertion part has a gap, which seems to be fine for Halogen bulbs, but when the LED Valve is installed as it is, it is tilted against the pattern of the reflector.
So I managed to install it by modifying it in various ways. I think the quality is good for the price.
View detail
Miscellaneous.
I bought Side Panel because I liked it.
I did not check it as soon as it arrived and installed it just now.
Poof...
Something likeQuantity:Pair (for Left and Right) The holes are clearly visible after they were plugged one by one, and can be clearly seen in the right light.
View detail
Disappointment!
I opened it the other day as the other parts were coming together and found that the Frame was dented. You should check it as soon as you receive it. View detail
No good
useless
Garbage box
Material has problems and is too soft.
View detail
Fits: HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Quality that does not disappoint
How can it be called for MONKEY?
I can't use it because it's too hard even if I adjust the Knob to the weakest setting. Is it good? It is so hard to drive!
LargeThe one I had on a long time ago is much easier to drive.
Mounting Bracket is also available. What the hell? In the end, the Front fork became full of Wound and the Body became a resident of the junk box.
Of course, since it is for MONKEY, it has a Bracket, but this is a Yankee Bracket like the ones sold at Home center, but, well, it is impossible. I had to throw away my Gold in China this time, too.
Since it is Chinese, there should be no instruction manual, and it does not disappoint!
I can't recommend it highly enough.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey
Gorilla Type Tank
Worst case scenario, TankLiner and paint were scheduled, but the interior was rusted and I had to start with rust removal.
It is roughly made and needs to be put in the Pate. Incidentally, GORILLAOEMSeat is also difficult to install without processing. It may depend on the individual, but the shape is quantity.:Pair (for Left and Right) It is not symmetrical.
View detail
Approximately six months after purchase, the
About six months after purchase, the Meter's display light stopped working due to poor contact.
Furthermore, during touring, the Knob portion of the mileage meter is removed and the meter number cannot be reset.
We plan to replace it with a new one from another Manufacturer.
Complete shoddy product, no recommendation.
View detail
Fits: HONDA GORILLA, HONDA MONKEY
It's not a good look.
Good product at a glance.
It is a product that should not be bought by anyone who cares about the fine appearance of the product.
Paint is thick, but peels easily when Gold genus parts rub against it.
Some of the iron used in Large land rusts quickly.
It would be better to always have a Rust protection such as Spray or Touch up paint.
The weld marks are as clean as JAPAN products without any strange stubbers.
More eye-catching than that.
Is it for the chain line? Maybe, Stubby has a strange shape.
Large to the Left Side.
Distorted to the Left Side to the extent that it may interfere with the Side Stand.
It is so large that you may wonder if it is reused for Wide Stubby that was left over from other products.
I mean, you're recycling." It's so oddly shaped that it nods to the opinion that determines
Even images of stores other than webike use the oblique illusion to make them unrecognizable.
Since MONKEY itself is designed with very short swing arms, the pivot position is in an impossible position for a normal motorcycle. Therefore, if you use Long Swing Arm, the chain itself will sag when you ride due to the bad combination with Rear Suspension. If it is a Stubby to avoid the sagging, it may be acceptable, but the appearance is very bad.
I'm sure Stubby won't interfere with Chain if we leave this much space open, right?" (grin)" It is so crooked that one can almost hear the voice of
Stubby is not suitable for the low &long ride height that Japanese people like.
If the Swing Arm is almost horizontal at 8Inch, it'll scrape on the sidewalk steps at the entrance to the store.
It was about 2-3 inches off the ground visually when adjusted with Jack without suspension.
I was expecting a Swing Arm with Stubby that had a sports taste.
The product that arrived was a Swing Arm with a perverted Stubby, which is a straight line of colorful things......orz
The strength itself is steel + Stubby reinforcement, so it's pretty pushy.
When putting the hubs in, if they went in at a slight angle, it was quite difficult to fix.
It seems that there is no strange rustling even if it is loaded with luggage and carried on its back and ridden over 100 km overall on mountain passes and elevated bumps.
Because I feel comfortable seeing images of people working together on social networking sites, etc.
Once assembled, it's a discreet object.
If you're like me, you're looking for a "Quantity:Pair (for Left and Right) For those who prefer "symmetry and firm symmetry", this is a very uncomfortable part!
However
"Look." Than "real" (i.e. not "actual") I can recommend it to those who take
View detail
I put it on cb400ss.
Is it a problem with Engine Displacement Volume? The actual speed and Meter are messed up. This will not pass inspection. I can't use it. View detail
I think it's cheap, but not cosmetically pleasing.
Maybe it's just something I happened to purchase.
Crimp pin was not very durable, and I could not successfully Crimp from about the 3rd Chain.
If only Crimp pins can be purchased at a discount, this would be fine.
I used to use KTC, but I would have preferred to buy that one, even though it was several times the price.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA MONKEY
Different lengths of Oil gauge
The price and build quality are fair enough.
This one is probably of the MONKEY type? and
The threads are the same, but I think the length of the gauge and the height of the line are different for CUB, MONKEY, and MAGNA series.
I'm sorry I didn't check it better because I bought it from CUB's conformity…
Gauge is much shorter.
View detail