Reviews
Easy to ride!
It is easier to ride than it looks.
I recommend it for its cosmetics.
View detail
Cool!
It fits so well that I wish it came with it from the start!
And it's easy to install!
It tightens up around the Front!
Recommendation.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Cool!
Casting wheel of my dreams!
Cosmo!
I used it for GORILLA, but I also bought it for DAX, which I'm in the process of creating. w
View detail
Fits: HONDA GORILLA, HONDA MONKEY
It's not a good look.
Good product at a glance.
It is a product that should not be bought by anyone who cares about the fine appearance of the product.
Paint is thick, but peels easily when Gold genus parts rub against it.
Some of the iron used in Large land rusts quickly.
It would be better to always have a Rust protection such as Spray or Touch up paint.
The weld marks are as clean as JAPAN products without any strange stubbers.
More eye-catching than that.
Is it for the chain line? Maybe, Stubby has a strange shape.
Large to the Left Side.
Distorted to the Left Side to the extent that it may interfere with the Side Stand.
It is so large that you may wonder if it is reused for Wide Stubby that was left over from other products.
I mean, you're recycling." It's so oddly shaped that it nods to the opinion that determines
Even images of stores other than webike use the oblique illusion to make them unrecognizable.
Since MONKEY itself is designed with very short swing arms, the pivot position is in an impossible position for a normal motorcycle. Therefore, if you use Long Swing Arm, the chain itself will sag when you ride due to the bad combination with Rear Suspension. If it is a Stubby to avoid the sagging, it may be acceptable, but the appearance is very bad.
I'm sure Stubby won't interfere with Chain if we leave this much space open, right?" (grin)" It is so crooked that one can almost hear the voice of
Stubby is not suitable for the low &long ride height that Japanese people like.
If the Swing Arm is almost horizontal at 8Inch, it'll scrape on the sidewalk steps at the entrance to the store.
It was about 2-3 inches off the ground visually when adjusted with Jack without suspension.
I was expecting a Swing Arm with Stubby that had a sports taste.
The product that arrived was a Swing Arm with a perverted Stubby, which is a straight line of colorful things......orz
The strength itself is steel + Stubby reinforcement, so it's pretty pushy.
When putting the hubs in, if they went in at a slight angle, it was quite difficult to fix.
It seems that there is no strange rustling even if it is loaded with luggage and carried on its back and ridden over 100 km overall on mountain passes and elevated bumps.
Because I feel comfortable seeing images of people working together on social networking sites, etc.
Once assembled, it's a discreet object.
If you're like me, you're looking for a "Quantity:Pair (for Left and Right) For those who prefer "symmetry and firm symmetry", this is a very uncomfortable part!
However
"Look." Than "real" (i.e. not "actual") I can recommend it to those who take
View detail
Fits: HONDA Fits to MONKEY(except FI) GORILLA etc. Horizontal TypeEngine., HONDA Can be installed on Monkey gorilla etc. Horizontal TypeEngine
For Tire sizeUp.
[How is it used?
Installed for Tire sizeUp of YamahaPOCKE.
Was the one you received as per Image?
As shown in the image.
Was the installation difficult?
Bracket was not used, but Others parts were available.
How was your experience with it?
There are some areas where the color has peeled off, but I think that's okay, for example, because it is inexpensive.
[Included Parts:were they on?
As shown in the image.
[Was there anything that disappointed you?
Nothing in particular, but I am a little concerned about the rusting tendency of the product in the future.
View detail
Should have purchased this earlier!
[How is it used?
For Motorcycle maintenance
Was the one you received as per Image?
Yes, there is one paint peeling, but it is a CHINA Level product, so I'll just ignore it.
How was your experience with it?
More stable than expected.
[Included Parts:were they on?
JackAttachment is two kinds
[Was there anything that disappointed you?
I don't expect much from CHINA products.
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA dachshund, HONDA Shirley 50., HONDA Dax 70, HONDA Shirley 70
Quality is good.
It looks great, and being aluminum, it is light and accurate.
There is some BALI on the edge of the foil, so it would be good to remove it with paper.
View detail
TANAKA TRADING Front Fender
About quality and texture it's very neat and amazing About the feeling of use It gets a little messy because it has to be processed and installed Products to buy together Bolt, nut, cable tie Difficulty of installation easy Cost performance and comparison with other products Everything is done at the price The quality of the product is also high About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I purchased it to process and install it on my bike, but I really envied that msx 125 owners could buy a really good product View detail
Fits: HONDA dachshund, HONDA Shirley 50., HONDA Dax 70, HONDA Shirley 70
It is a good item
It looks beautiful and I am glad I installed it because it saves weight. View detail
Fits: HONDA MONKEY, HONDA GORILLA, Others
The length can be fine-tuned and the large size is convenient. I recommend it!
I purchased this product when I converted my Grom jc75 to Ron Sui. The length can be fine-tuned and it is a perfect product in terms of cost. However, compared to the OEM product, the precision of the parts used to connect the STAND to the car body is slightly less than that of the OEM product, so there is some play in the connection. I am convinced that this is unavoidable because it is a Universal Product, and of course, it is a Level that does not interfere with use. The reason I did not give the product a perfect score for quality, texture, and feel is that I took this play and gap into consideration. For people like me who want to enjoy adjusting ride height over time, this product will be a reliable partner. View detail
I was able to adjust it properly.
I have used it a total of three times on my medium and large motorcycles and have been able to adjust the oil level well each time without feeling any deterioration. (Purchased 1 year ago)
After use, I clean it lightly with Parts cleaner before storing it, and it has been used without any problems.
Cost-effectiveness is also Large, so a dedicated Tool is useful! (^^)
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 70, HONDA Super Cub 90, HONDA Super Cub 50, HONDA Super Cub 90, HONDA little cub, HONDA cub, HONDA little cub, HONDA cub
I don't have a spare tan, but...
Cost performance was good, but the mounting holes were slightly misaligned. View detail
I put it on cb400ss.
Is it a problem with Engine Displacement Volume? The actual speed and Meter are messed up. This will not pass inspection. I can't use it. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA MONKEY
Wow that's cool
[How is it used?
OEM Oil cap was ruined and
Changed from OEM to this because of this.
Was the one you received as per Image?
Yes
Was the installation difficult?
It's easy
Just take it off and put it on.
Confirm that ORing is present
How was your experience with it?
The beautiful Plating has a strong presence.
To the One point of the Clutch cover.
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA Super Cub 50, HONDA little cub, HONDA Super Cub STD-92 (12V model), HONDA Super Cub STD-92 (12V model)
I'm just...
When first installed, Lo did not light up.
Switching Valve to something else did not help.
I switched back to the NORMAL terminal and it was perfect.
The rest of the Screw holes are slightly out of alignment.
Well, because it looks good.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cub Pro110, HONDA Cub Pro50
By far the best center carrier
"Don't buy anything else, buy one from Tanaka.
Nothing is missing from practicality and price.
I've tried several, but this one is the best and the cheapest.
It is not too difficult to store various bags together.
Will repurchase 500%
Tana Sanghoe fighting!! ------------------------------------------------------------ -------- Don't buy anything else Practicality Kanji Price There is nothing missing I've tried various things, but it seems to be the cheapest and the best It is not too hard to compose various bags. 500%of the repurchase doctor Tana Vayment Fighting! Powered by Google Translator"
View detail
Fits: HONDA MONKEY, HONDA dachshund, HONDA Dax 70
Handlebars that need lot of work to fit
I bought these for a 1968 z50 restoration, since I had a hard time finding OEM ones. The good: - they are handlebars The bad: - the throttle cuts are very rough and need to be sanded - there is a seam that needs to be removed before you can install the throttle cable holder - standard honda brake levers don't work since the mounts are 2mm wider than stock I would not recommend these. View detail
It's good, but …
The holes in the circlip are small, so it was difficult to install the circlip.
I didn't have any difficulty when removing the OEM, but I had a very difficult time assembling this product.
I wish they would make the hole just one more size Larger…
The rest seems fine!
View detail
I think it's cheap, but not cosmetically pleasing.
Maybe it's just something I happened to purchase.
Crimp pin was not very durable, and I could not successfully Crimp from about the 3rd Chain.
If only Crimp pins can be purchased at a discount, this would be fine.
I used to use KTC, but I would have preferred to buy that one, even though it was several times the price.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA MONKEY
Different lengths of Oil gauge
The price and build quality are fair enough.
This one is probably of the MONKEY type? and
The threads are the same, but I think the length of the gauge and the height of the line are different for CUB, MONKEY, and MAGNA series.
I'm sorry I didn't check it better because I bought it from CUB's conformity…
Gauge is much shorter.
View detail