Reviews
Fits: HONDA Shirley., HONDA dachshund, HONDA monkey, HONDA monkey
Easy installation!
By lowering the Front Fender, it looks more Drill and also reduces the mud splash to the Engine. In addition, it also strengthens the delicate front fork of MONKEY! The only drawback is the silver-colored material.:Since it is made of aluminum, it looks like it has been customized in a MachineMachine way, so there may be different tastes. View detail
Fits: HONDA monkey, HONDA For Ape and other φ130 headlight lenses, HONDA For Ape and other φ130 headlight lenses
It wasn't just about looks!
I thought it was just custom parts for looks.
MONKEY50 when straddled.
Because of its small size, the distance between the body and the headlight is very close.
The light reflected off the helmet's shield and was difficult to see, but after installing Visor, the reflected light seems to have decreased.
The construction is slender, but once installed and secured, there is no problem.
View detail
Defective Reflector
The M6 Screw is bent and the Nut will not fit again. We fixed it by setting up the Tap again. View detail
Fits: HONDA monkey, その他 Rear hub mounting width is the same as stock., その他 Stock chain cover can be installed., HONDA monkey, その他 Rear hub mounting width is the same as stock., その他 Stock chain cover can be installed.
Personally satisfied
I purchased Red.
Installed on a 2007 MONKEY.
As other people have mentioned in their IMPRESSIONS, it cannot be installed without modification.
Use a sander or File to remove the areas shown in the photo.
If you are buying on the premise of processing, I think the cosmetics are quite good.
It is highly recommended for those who do not want to disrupt the OEM Style!
View detail
Fits: Others Vehicles equipped with CUBetc. Horizontal TypeEngine, HONDA MONKEY
When installing on a CUB, be careful of the compatibility with the vehicle body.
I bought it after confirming that the OEM changefootpeg does not interfere with it, but the change shaft is longer than OEM, so I could not install it.
I feel that this is a kind of fraud because the answer to my inquiry before purchase assured me that it could be installed, but after purchase, the answer was given as reference information.
Regarding the quality, there are dents on the edge of the opening at the top of the cylinder, and it is assumed that there is a risk of blowing in the future.
Note that the Cell is mounted on the underside like the GiornoCUB, so the parts around the generator are not compatible.
OEM Product is available for CUB90 intake manifold, muffler, and rear brake pedal.
View detail
Fits: HONDA Mighty Ducks (ST90), HONDA Dax 70, HONDA Shirley 70, HONDA Shirley 50., HONDA dachshund, HONDA Mighty Ducks (ST90), HONDA Dax 70, HONDA Shirley 70, HONDA Shirley 50., HONDA dachshund
All good
The truth is that everything is very good and very fast shipping very good material and very complete great sellers thank you very much for everything ---------------------------------------------------------- The true that everything is very good and very fast the very good material and very complete sellers thank you very much for everything Powered by Google Translator View detail
Fits: HONDA monkey, HONDA For Ape and other φ130 headlight lenses, HONDA For Ape and other φ130 headlight lenses
See Up??
Type that is inserted into the gap between the Body and Lens of Headlight.
The Visor side has a turnover so that it will not rattle when firmly inserted, and the appearance has been dramatically enhanced.
HeadlightQuantity:Pair (for Left and Right) If you remove the screw from the first screw, you also need to loose the next removed Lens, but a Phillips screwdriver is all you need.
When removing and attaching the Bracket that holds the Lens Cover
It was easy to install, although a little hang is required.
View detail
Fits: HONDA Grom MSX125
Tanaka Shokai's Rear cowl for Grom
I am satisfied with both the look and feel of the product.
The Large Change was reasonable, which is a big help.
I am planning to purchase other parts in due course.
View detail
Fits: HONDA APE, HONDA CUB, HONDA MONKEY, HONDA MONKEY
No wonder the price is so low.
When I installed the OEM parts, the low beam light came on without any problem. I installed the OEM parts and the low beam lit up fine, but the spring inside was weaker than the OEM parts and the contact seemed to be faulty. I guess it is because the price is so cheap. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey
Quality: Very good quality.
I received the parcel and looks good. Arrived a little late as promised delivery date. Maybe due to weather, heavy rains here in Metro Manila. I have not fitted it yet. I just hope it will fit well on my project bike. Packing was very excellent. No visible damage to the package and the contents inside. Thank you very much Webike, I will now browse and check for more parts View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Pendulum protection
Excellent swingarm protection, not from the factory, so the chain scratches the paint on the swingarm. I put it, it got up like an original part, the quality is very good, I will still take it. -------------------------------------------------- -------- Excellent protection of the pendulum, there is no from the factory, so the chain scratches the paint on the pendulum. I set it up, I got up as an original part, I will take the quality very good. Powered by Google Translator View detail
Fits: HONDA Mighty Ducks (ST90), HONDA Shirley 70, HONDA Dax 70, HONDA Shirley 50., HONDA dachshund, HONDA Mighty Ducks (ST90), HONDA Shirley 70, HONDA Dax 70, HONDA Shirley 50., HONDA dachshund
Color diameter does not match ST70 ….
I am Restore DAX (ST70) and bought a beautiful Axle Shaft.
The texture is a little disappointing, but I don't think it is a problem at all for practical use.
However, one thing that was not so good was that the diameter of the collar was too small. The Brake Side was fine, but the Sprocket Side could not be used because the collar diameter was too small for the seal into which the collar was to be inserted.
Perhaps a different year DAX Seal is needed?
View detail
4L Wind Tank
4L style! backslide (^o^) /But the amount of fuel will be a little less than OEMTank, so please be sure you are satisfied with your order before purchasing. View detail
Fits: HONDA CUB, HONDA CUB, HONDA CUB, HONDA CUB
footpeg
Used when installing specula
Brake pedal shaft is too inaccurate.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Cospa is good
Purchased additional items because of the good cosmetics.
I use it with White's TL Seat depending on my mood.
The ride is neither good nor bad.
The installation is a normal Seat replacement, but the hole position is
It is a little tight.
View detail
Not exactly what it was originally intended for.
Although it is not the original purpose, the spring of the stand switch interferes with various external parts installed, so I bought it to let it go.
It can be used just fine when co-tightened in the Footpeg Bracket hole under the Engine.
View detail
Plating section is Material:Plastic and cheap….
[How is it used?
I bought it to put a reflector next to the headlight to make it look like an old car.
Was the one you received as per Image?
The base part of the plating is made of Material:The large size is about 50mm in diameter, which I think is a good size.
Was the installation difficult?
The M6 Screw was long, so we cut 5mm off and used it.
How was your experience with it?
I am glad I purchased it because it gives off a cheap but good atmosphere.
Durability will be verified in the future.
[Included Parts:were they on?
Rubber cushion for fork mounting is included.
[Was there anything that disappointed you?
Plating part is Material:Plastic and cheap point. (It is actually cheap, but …)
Reproduct such as ▼BRC seems to be a little small in large size, but the foundation is Material:It seems to be Aluminum, so it is difficult to obtain the OEM equivalent.
View detail
Fits: HONDA dachshund, HONDA Shirley 50., HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Shirley 70
quality for the money
I purchased this product to use as a multi-reflector, but when I received it, there was an error in the dimensions of the Rim and Lens, so the Lens was uneven and there was a gap between the Rim and Lens. Also, the positioning protrusion of the Valve insertion part has a gap, which seems to be fine for Halogen bulbs, but when the LED Valve is installed as it is, it is tilted against the pattern of the reflector.
So I managed to install it by modifying it in various ways. I think the quality is good for the price.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cub Pro110, HONDA Cub Pro50
Just right with moderate quality.
Carrier originally had Bamboo Kawa Plating for CUB, so I put it on, but I thought Black would look good on JA45 Green Light, so I bought it. It was not so luxurious, but matched with the cool feeling of CROSS, which was what I was aiming for. The price is about half of the manufacturer's product, and I can now put thin luggage in it. The only thing I regret a little is that the body is painted black, but the included screws are silver. I read this imprement before I bought it, and it said that the CUB needed to be modified, but the CROSS was large and sturdy. View detail
Miscellaneous.
I bought Side Panel because I liked it.
I did not check it as soon as it arrived and installed it just now.
Poof...
Something likeQuantity:Pair (for Left and Right) The holes are clearly visible after they were plugged one by one, and can be clearly seen in the right light.
View detail