Reviews
Fits: HONDA DAX, HONDA CHALY
Tanaka Dax fender
Fitment is great and paint finish is beautiful. Fitted on a USA spec 1970 Honda CT70 that I am converting to Japanese spec. View detail
Fits: HONDA little cub, HONDA Super Cub 50, HONDA Super Cub STD-92 (12V model), HONDA Super Cub STD-92 (12V model)
Don't expect quality.
I had a headlight unit from another company attached to my LITTLE CUB, but after more than 10 years of use, the plating was peeling, so I replaced it.
The installation itself was not a problem, but the Socket does not seem to be durable.
I installed it at the end of September 2023 and from the beginning of December 2023 the Headlight started flickering occasionally and a few days later the Headlight disappeared while driving and became completely unusable.
I suspected that the Valve was out of ballast and tried to remove it, but for some reason it would not come off. When I pulled it out by forcibly turning it with pliers, I found that the Socket had melted. The melted valve had lost contact with the valve, and the resin was further burnt.
Since the price is reasonable, I think it would be better to use OEM products like Large for Socket and Valve, with Socket and Valve as extras.
View detail
Fits: HONDA CUB, HONDA MONKEY, HONDA dachshund, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Easy to change carb position
Casting seems very strong, however the casting port hole for the engine side is not perfect. I'll need to use a Dremel to tidy up the port as can be seen in the photo. Otherwise I feel it will not produce as good as power as it could. Installation is very easy on monkey due to being able to position the carb however you like. Product was priced well just a shame about the casting hole. Webike is always very quick with shipping A+ View detail
Don't buy it.
I bought a DID 530VX3 to Crimp an existing Chain to replace the Chain, but the Crimp pin broke off and I could not Crimp it.
I managed to cut the chain by using Leutor to drop the crimp at the end of the chain and then cut it, but it seemed to break.
It was not of the least use and dumped the Gold down the drain.
I bought a similar Tool from Amazon for about 3,000 yen because the parts seemed to be usable, and it broke the same way, so I assume the contents are the same.
I ended up buying DID's Kashimaru-kun and did the Crimp, which is an OEM-specified product, and was able to do the Crimp easily and without any danger at all.
View detail
Cute colors.
[How is it used?
Purchased for 4Lfor MONKEY.
Both the OEMTank and my previous Chinese Tank have rusted and I bought the Tank because it was cheap. The other Tank will be rusted out etc. while I use this Tank.
The color was a lovely Yellow color, which was the deciding factor in my purchase.
Was the one you received as per Image?
I am glad that the color was exactly as I had imagined in the picture of the product.
Unfortunately, it looked like the inside of the Tank was rusty, although only slightly.
I think the cospa is good.
Was the installation difficult?
Simply remove the OEMTank and attach it in the same manner.
Rubber parts for the tank are removed from the OEMTank and reused.
It is not that difficult a task.
I thought I had the Fuel Cock on tight, but it started leaking when I added Gasoline, so you should be careful and make sure it is closed tight. I re-tightened it and the leak stopped.
How was your experience with it?
First of all, it looks cute. As soon as I put it on, it felt right. I was glad I chose this one, because I could have bought a paint base, but it would have been too much trouble. If I get tired of it, I will paint this tank.
The size is perfect, and I'm happy with it.
[Included Parts:were they on?
Fuel Cock and Key x2pcs. and 2 types of GasolineTube were included.
[Was there anything that disappointed you?
It is supposed to be new, but it looks a little rusty inside the Tank, which is disappointing. Other than that, I am satisfied with the cosmetics.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
Focus on appearance
[How is it used?
Purchased for 4Lfor MONKEY.
I was looking for a down type muffler because the exhaust system and carburetor seemed to interfere with each other when replacing the carburetor.
Among them, I bought this product because it looked cool and was reasonably priced.
Was the one you received as per Image?
The color and shape were exactly as shown in the Image.
Was the installation difficult?
It is not difficult.
At first I thought the exhaust bracket was not long enough, but I was able to install it by installing the bracket near the with Gasket very loosely and tightening it after applying the bracket. I am glad that I was able to install the bracket, although I feel that it is not the perfect size.
There was no Instruction Manual for handling, but it was Large sturdy.
How was your experience with it?
I chose it for its looks, but when I actually installed it, I thought it was even cooler than I had expected.
I'm a little worried that the bracket part is not the right size, but so far I have no problem with it.
The sound was quite loud. It's not like an explosion, but the sound was on a level that might bother the neighbors.
I would have liked it to be a little quieter.
[Included Parts:were they on?
There were none in particular.
[Was there anything that disappointed you?
The size of the product is not Exactly, and there was some uneasiness when installing the product.
It is a conforming product, so it should be fine, but I wish it had a more Exactly feel to it.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: Others Universal
Broke after 3 months.
AF05E with AF35carburetor installed
Cover part is Material:Plastic, and I noticed that the Bolt was cracked from where it was stuck.
Fortunately, even if this part breaks, it is sucked in via Filter, so we have no choice but to use it as a normal Powerful!
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Replacement for OEM grommets
I got these as a replacement bush for my new fenders. They fitted much firmer in the holes and are a excellent price vs oem. Super basic and easy to install. A+ View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA MONKEY
Great oil gauge
Help add to the final look of your motor with this machined oil dip stick. same length as the stock 50cc but adds a little bit of class to the overall look of the engine View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Chain Slider Protection
Rubber protection boot feels high quality. Installation was very easy and simple, the fitment isn't 100% perfect around the chain cover bolting position but can hardly notice id say 9.5/10. It will protect my swingarm from my chain perfectly. Packing was very nice and shipping times from Webike is always very fast! Thank you Webike! View detail
It does not fit into the other 250 models.
I purchased this for use with Blinker relay, but it does not fit into Relay's Connector.
The shape is 250 type, but it does not stick to Male terminal because the direction of the terminal is 180° opposite to Connector.
It has no use as a Connector.
This ConnectorSingle Body can be used as a Harness, but I don't think that is what a Connector is.
View detail
Fits: HONDA APE, HONDA CUB, HONDA MONKEY, HONDA MONKEY
Poorly made, poor contact
I have used it several times and it is almost certain to have poor contact.
Spring is weak, Lamp side contacts are poorly made, and terminal height is different between hi and lo.
Do not buy this product as it is completely useless and cannot be reworked.
HondaOEMSocket also has many defects, but OEM is better.
View detail
Fits: HONDA round-eyed turnip, HONDA little cub, HONDA round-eyed turnip, HONDA little cub
Please sell more solid products.
[How is it used?
I was going to order HondaOEM Product for C90 because I wanted to have a meter over 60km/h since I replaced 90ccEngine in my LITTLE CUB that I got. Discontinued. I was told that the product was not rated highly by Webike, so I purchased this product, even though I thought it was not rated highly by Review.
Did you receive the item as per the Image?
It looked OEM-like and nice...but not this.
I'm going to write udderly below, but in a way. As per your Review. The product was not good at all.
Was it difficult to install?
In the era of pure Japan production Iron CUB The wiring around the handlebar is a mess, except for the Second Type Model, which is the most common Injection, and it looks terrible.
The difficulty level is low, so please be patient and follow the Wiring and install it! (And I wrote, but I don't think you should buy it) 。
How did you like it?
Listed in Review Meter stopped working." I have not experienced any symptoms of ... I don't use it that much." It would be more accurate to say that the "new" is a "new".
First, to attach the needle Gold to fix the Meter The claw-shaped part." If you understand the role of this part, even if it is a copy product, you would understand that such a flimsy material is not good enough....
The bulbs that illuminate the inside of the meter are dark & burn out quickly, and are rarely sold at Motorcycle supply stores because they are a different size bulb than the size used in OEM meters since at least the 1990s.
Even before the bulb went out, the Meter was too dark to see at night.
I was so brokenhearted at this stage that I returned to the Normal meter, as I knew from the review that the meter was likely to stop working even more...
Was "Included Parts:" attached?
OEM Product Speed Meter Assembly Similar toQuantity:The Meter is in a Set, with the Meter content bulbs and Wiring built in.
Were there any disappointments?
All of the above is true, and it's more than half the price of what the OEMMeter cost when it was sold, but it's not a product, so it's not a product. Dumping the Gold." I used a Point that I had received in this Review section, so I didn't have to pay for it, but it left me with a feeling of emptiness that all the hard work of typing the text had been lost...
Other items that would be helpful
Point and hang of installation
As I mentioned above, the nails to stop the fixing needle Gold do not function properly, so it will be difficult to install.
[Availability and clarity of the Instruction Manual
No, if you don't know what you're talking about, don't buy it.
However, some may be confused because the color of the wiring is different from that of the OEM Product.
[Notes]
Everything I've written so far. Better not to buy." That being said, I would caution that if you are still interested in purchasing the product, good luck.
[ITEMS TO BUY TOGETHER
A used OEMMeter that you can buy for a price you won't mind paying if it fails."
Disassemble this product and OEMMeter and Quantities:2pc. Set1 (Nicoichi) If we can combine the good points of each other, we may be able to turn it into a good product. (skill & knowledge & willingness to work)
[Opinions and requests to Manufacturer
Now that the Meter for OEMC90 has been discontinued, Don't sell this product! I will not say. I don't care if the price doubles. A product that works well." to the
View detail
Fits: HONDA ST90 (ST90), HONDA CHALY 70, HONDA DAX70, HONDA CUB, HONDA CHALY 50, HONDA DAX, HONDA GORILLA, HONDA MONKEY
Used in CUB110.
Installed at the time of oil change and also installed with bore up and it catches surprisingly well. View detail
Fits: HONDA MONKEY125, HONDA Monkey 125
I bought it wrong Cannot install on jb03
Quality and texture information is excellent for the price Model jb03 does not need to be installed for usability Purchase and install a 516-1432900 kitaco shift link on model jb02 It's not easy to install Cost performance and low price and low quality compared to other products WeBike packaging is always good. Shipping and packaging will arrive in a week Purchase concerns, precautions, and advice jb03 do not fit.Unable to install after ordering due to incorrect year inquiry... But I recommend it because the price is half the price compared to other brands View detail
Fits: HONDA APE, HONDA CUB, HONDA MONKEY, HONDA MONKEY
there is a problem
However, the base material of the contact point with the Valve is the same transparent resin as that around the Connector, so there may be a problem with the heat resistance of that part, or it may have melted into a sludge and deformed, making it unusable.
The period of use was about six months for weekday commuting use.
Since the OEM was a Black resin material only in that area, I assume that a heat resistant material was used there.
I assume that this product has a delicate Spring function that presses the contacts together or the contacts attach and detach, generating heat, which the material could not withstand.
Just before the damage, the Light was on and off due to vibration.
The contact point on the Valve side had also been cut off in the shape of the Socket side terminal at the Center contact point, probably due to poor adhesion caused by the Spring function.
The spring was stiff at the time of installation, and after installation, it was as if the spring had shrunk to the point of having no stroke.
We are now using OEM and have no problems, so we have decided that OEM is the way to go, even if it is more expensive.
View detail
Fits: HONDA MONKEY, HONDA DAX, HONDA CHALY 50, HONDA CUB, HONDA DAX70, HONDA CHALY 70, HONDA ST90 (ST90)
Recommended
If you don't care about how it looks, why not?
There is a matter of taste.
It's cheap, so I'm happy with it.
View detail
Fits: HONDA DAX, HONDA CHALY 50, HONDA CHALY 70, HONDA DAX70, HONDA MONKEY, HONDA CHALY 50, HONDA CHALY 70
Recommended!
It seems a little stiff.
It's extra because it's flat….
View detail
It would be nice if there were!
It looks different when it is there!
I want it to be attached from the beginning.
View detail
Recommended
Cospa!
Recommended!
Rust is concerned.
View detail