Reviews
I checked for conformity and it didn't.
Lowdown on FXDC.
The 1inShort Stand of a certain U.S. Brand has been Rusted so much that we decided to replace it with this one.
If it is made in Japan (including overseas production + quality control by Japanese companies), it is safe in many ways, and there is hope that maybe it will not rust so easily.
Now assembly.
Remove the old STAND, remove the Block for fixing the STAND to the Frame and the parts for fixing from the old STAND, attach the Block to this product and the parts for fixing... it won't fit!
The STAND side is slightly thicker and does not pass through the hole.
I thought I had made a mistake. I was surprised, but I didn't make a mistake.
Slightly thicker, this thickness, perhaps the thickness of Plating?
Thick plating is welcome for Large, but the assembly part must be made with that in mind!
It took about an hour of extra time, but we were able to assemble it safely.
Nowadays, even CHINA has better accuracy. 。 It is impossible.
I wonder what people who can't afford to cut down would do in this situation.
I've already removed the old one, and the mental burden of putting it back in is LARGE.
Harley is still Jack-up and waiting for delivery for return and exchange? There's no guarantee that the replacement will fit properly.
Incidentally, the quality of the finish of the product itself is not as good as that of a certain U.S. product.
But I thought it was totally OK for such a low price before assembling it.
If the quality is not normally assembled, even at this price. Ok." It will not be a
If this doesn't produce Rust for a long period of time, it might make up for this annoyance....
View detail
Fits: HARLEY-DAVIDSON Exclusive for NEOOriginalAlarm System
AlarmREMOTE CONTROLLER
I bought it as a spare, but the battery was completely drained and I couldn't check the operation. I didn't have the battery on hand and could buy it at a 100 yen shop, but I was worried if I could replace the battery and get it working. I have been using the REMOTE CONTROLLER for about 2 years now and have not had to replace the batteries yet, but it has been working well. View detail
This is not a Universal Product.
It could not be attached to all of the helmets we have, and we felt it was very ununiversal.
The material may be acrylic, but it is easily scratched.
View detail
It doesn't tighten up … at all …;
Whether it is an individual difference or the accuracy of the product, the body is not fixed at all even if the bolt is tightened to the limit.
Really disappointed…;
View detail
Fits: HARLEY-DAVIDSON Vehicles with OEM CVCarburetor
When I Rose again for Carburetor setting, …
I took the carburetor apart again for carburetor setting …
The Gasket has been stretched to a larger size and is no longer stuck in the groove;
It is not possible to reassemble the unit after setting it to "Rose".
Unfortunately, it was below my expectations…
I had no choice, so I reused the old one anyway…
View detail
Large Scale
The ring is slightly large, but I couldn't tell at first.
I hit it pretty hard and got in the middle of it.
Inner Tube is more flexible than before disassembly.
Removed because it was rattling
Comparing the old and the new, it is slightly larger.
Also on Inner Tube
I've tried to match it, but even with the Bush gap closed.
There is a gap between Inner Tube and
It didn't feel right. Something to be sharpened and used?
I could have cut it down and used it, but it was in the process of being embedded.
Narrow with the smell of Fork waste oil in the air.
I didn't get that far in the garage.
The inner sliding surface is also
Despite running nearly 50,000 kilometers.
This new item and the look of it.
It didn't change, so I reused it.
The rattles are gone.
View detail
Thicker than OEM
Cannot pass through hole in Crankcase, making it unusable. View detail
I wanted an explanation of which part is 6mm.
I bought it because it is 6mm and I wanted to put it in an M6 hole, but it would not fit.
Isn't the Screw part M8?
Could it be that the LED bulb is 6mm?
View detail
Slightly larger diameter
I purchased this as a replacement for OEMParts46516-01 BUSHING GUIDE.
I don't know if it's an individual difference, but the diameter is slightly larger than the quantity I purchased.:2pc. I can't get into it even if I type in both Set.
If you hit it hard enough, it might go in.
Damage to the Inner Tube may range from vertical scratches, etc.
I have experience working with OEMParts (46516-01), but it had a completely different hammering feel.
I couldn't help myself, so I bought a Drag Specialties Bushing (0404-0314) and worked on it.
The work was completed without problems with the same hammering feel as the OEM.
View detail
2 Clamps are not included in the package!
2 Stainless clamps missing! Not included in the package! You didn't check it when you packed it! Please ship ASAP!!!! View detail
if that's not possible
Worn on Helmet by Da Bull Ring
Installation was never so easy.
When I mounted it on the Helmet and tried to use it…
The removal didn't feel easy or one-touch at all.
Probably hard to put on and take off with the Gloves on.
I gave up and tried to remove it from Helmet, but I felt like I had no choice but to destroy it.
View detail
I was looking forward to it.
The product arrived on time, but the Element was crushed. I shaped it by hand to a certain extent, but the distortion is still not solved. It's a shame because I had high hopes for this product. View detail
Lens melts in an hour after use.
It was made of steel and light Design was good, but Lens melted after 1 hour of use.
When you take it apart, Valve touches on the Lens.
This product has structural defects and is not recommended.
Do you feel like Manufacturer is just buying cheap Chinese and selling it?
View detail
Not available
I used it on a 22mm Handlebar, but it was skunked and wouldn't stay in place at all.
I have no idea what you're referring to as for 22mm.
Shouldn't the size of the inside diameter be indicated as the number ofmm to be used?
It was cheap, but... "A cheapskate This is a product that embodies the
It should not be purchased.
View detail
We got another one.
It is indeed like a toy and I don't use it. View detail
We got another one.
It is a product subject to Objection without limit.
We await your response.
View detail
Fits: HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
Quality is not good
I had the replacement done at a specialty Shop and the Lever side Ring shattered upon adjustment! I'm glad I didn't start running it. I guess they didn't inspect it or anything. The return and exchange was also no good. It is better not to use the original without knowing the identity. View detail
Fits: HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily
Only looks
I put it together on a HarleyEVO FXSTC SHOWA suspension.
It's not useless, but it's not at all well made.
It seems to come off soon because there is no construction of the part that fits into the groove of the Outer.
Rubber didn't feel like incorporating in Pe LePera so I reused the old Dust Seal.
The cheap Oil Seal I bought at the same time is so far Large sturdy.
View detail
?
The car ran fine after the replacement, but one day when I started it, the BatteryLamp light came on.
When I checked with the tester, the Battery is not receiving power.
Two months and then it breaks down.
I think I've pulled a HaGap.
View detail
Fits: HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON DYNAFamily
worst case scenario
It installed to Xl883n, but the thickness of the paint is too much, but the accelerator grip is It does not go in unless you screw in forcibly, not to say that it does not turn, but it does not go in unless you screw in the Accelerator grip part. I stripped the paint off on my own and it was finally ready to be used.
I would never buy from the manufacturer again.
View detail