Reviews
Safe and secure JAPAN!
I often ride my car in the rain, and this bearing is resistant to rain and does not deteriorate easily! I strongly recommend replacing the OEM wheel bearing of Ninja250SL, which was cut by CostCut and the quality is not so good (laugh), because you can really feel the good performance of this bearing! The price is also lower than OEM! View detail
Bearing for Ninja1000 rear wheel
Outer diameter 52mm
Inner diameter 20mm
Thickness 15mm
KawasakiOEM Product No. 601B6304UUU 1804
Both SidesSeal type LLU with the best dustproof and waterproof.
Instead, friction Torque is sacrificed.
Since this is a TradeOff relationship, this is the only way for amateurs to get their hands on it.
NTN's products are also used by OEMs, but OEM Products are expensive, so NTN's products are purchased.
No problem at all
Please purchase C3 for the gap.
View detail
Bearing for Ninja1000 front wheel
Outer diameter 42mm
Inner diameter 20mm
Thickness 12mm
KawasakiOEM Product No. 601B6004UUU 1639
Both SidesSeal type LLU with the best dustproof and waterproof.
Instead, friction Torque is sacrificed.
Since this is a TradeOff relationship, this is the only way for amateurs to get their hands on it.
NTN's products are also used by OEMs, but OEM Products are expensive, so NTN's products are purchased.
No problem at all
Please purchase C3 for the gap.
View detail
Bearing for Ninja1000 Sprocket
Outer diameter 52mm
Inner diameter 25mm
Thickness 15mm
KawasakiOEM Product No. 601B6205UU 1782
Both SidesSeal type LLU with the best dustproof and waterproof.
Instead, friction Torque is sacrificed.
Since this is a TradeOff relationship, this is the only way for amateurs to get their hands on it.
NTN's products are also used by OEMs, but OEM Products are expensive, so NTN's products are purchased.
No problem at all
Please purchase C3 for the gap.
View detail
New is good for mental health
Used at the Rear sprocket of SUPER CUB
It's cheap and even if it fails, it's not a big deal, so you can DIY with peace of mind.
I was originally hooked on Smooth, so I don't know how it works.
But new is good for mental health.
View detail
Used for front wheels of CUB
Used for front wheels of CUB
I didn't have anything to do in GW.
First attempt to replace bearings at the same time as changing tires
The new one spins Smoothly and feels great!
I had considerable difficulty fitting the new ones.
Refer to youtube videos, etc.
I punched it out with ConcreteAnchor.
It was quite a challenge.
If I have to do it again, I will buy Puller.
View detail
Smooth and pleasant.
Used for rear wheels of CUB
I didn't have anything to do in GW.
First attempt to replace bearings at the same time as changing tires
The old one had a skinny feel when I turned it with my finger.
Expect it to be smoother with the new Large
Refer to youtube videos, etc.
I punched it out with ConcreteAnchor.
It was quite a challenge.
If I have to do it again, I will buy Puller.
View detail
Completely sealed, dustproof and highly durable
OEMWheel bearing rotation became reluctant, so all front and rear wheels were replaced at once. The breakdown is 6203ZZZ×1,6205ZZ×1,6302ZZZ×2,6303ZZ×1 total Quantity:I need 5pcs. The OEM was bare bearing and had no turning at all due to the mixture of old grease and garbages, so I was very impressed with the smoothness after the replacement. View detail
Completely sealed and dustproof Type
OEM wheel bearing was worn out, so I replaced all front and rear wheels at once. I expect the durability to be Large because it seems to be able to prevent Garbage from mixing. View detail
Good
[How is it used?
For Bearing Replacement
How was your experience with it?
The seal is solid and the product is a Large Hand Manufacturer.
There is no problem for now
How did it compare to other products?
[Points to note]
Use of special tools
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
OK
[How is it used?
For Bearing Replacement
How was your experience with it?
Rubber seal is ideal for waterproofing and guristubishi.
How did it compare to other products?
[Points to note]
Be careful not to strike at an angle or hit too hard.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
as one would expect
[How is it used?
For Bearing Replacement
How was your experience with it?
no problem
How did it compare to other products?
Reliable Large Hand Manufacturer
[Points to note]
Be careful not to strike at an angle or hit too hard.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
It's a sealed Bearing, so maybe it will last longer than OEM?
[How is it used?
I used it when I bought a used SEROW and Restore it.
Was the one you received as per Image?
Because the wheel bearing of SEROW225 & 250 is an open type without a lid. "Grease spill." Ya "Mud and water intrusion." This product is a sealed type, so you can be assured of its durability.
Was the installation difficult?
It is easy if you have a special tool, but you can replace it without it. You can find it in the video search.
How was your experience with it?
I can't tell the difference because the original OEMBearing didn't degrade much. "I replaced it with a new one. "This will keep you Large for a while." The Large threshold is a sense of security.
[Included Parts:were they on?
BearingBody only
[Was there anything that disappointed you?
Not at all.
Other items that would be helpful
Point and hang of installation
If you're not familiar with it, it looks difficult (actually, it's not), so you might want to check it out in a video or something before trying it.
[Availability and clarity of the Instruction Manual
It's only Body in the box, but I don't think that's a problem because people who buy this product in the first place will have one goal in mind.
[Notes]
When hammering, be horizontal.
[ITEMS TO BUY TOGETHER
It's a good idea to buy Grease.
[Opinions and requests to Manufacturer
Please supply us for a long time.
View detail
I just received my 6301ZZCM. 。 It was not a C3 clearance.
I bought this for my Motorcycle FrontWheel bearing.
It seems that C3 is for Wheelbase Ring and CM is for Motor.
I would appreciate it if you could handle C3.
View detail
Same as OEM
The OEM is gone and I bought the JapanManufacturer one. No problem at all. View detail
nsr50 Wheel bearing
[How is it used?
Wheel bearing of nsr50
Was the one you received as per Image?
Yes
How was your experience with it?
It's rotating in Smooth.
[Points to note]
You have to get it in deep.
How did it compare to other products?
I don't think it will change.
View detail
NTN for peace of mind
It is solidly made and has a high quality and can be used with confidence. View detail
NTN with high accuracy
I thought the Bearing replacement needed to be replaced regularly.
It's a reliable NTN, so I have no complaints.
View detail
NTN Ball Bearing6303ZZ
On the 2001 Honda Forza MF 06, after 15,000 km, the suspension bearing of the right rear wheel hummed. Replaced with NTN products. After that I drove 3000 km, I'm happy with the result. When pressing in the bearing, so that the seat does not wobble, you first need to heat the suspension part with an industrial hair dryer to a temperature of 150 degrees C. This product has a metal protection for the balls, bearings with a plastic ring are installed on the scooter at the factory. View detail
Front together
This part is also purchased against the dimensions of the OEM. The accuracy will be high. A cheap one is enough if the consumable parts are replaced regularly. View detail