Reviews
Fits: HONDA CB-1, HONDA CB250RS, HONDA CB250RSZ, HONDA CBX250RS, HONDA CL400, HONDA GB250 Clubman, HONDA superhawk, HONDA Super Hawk 3, HONDA Zervis., HONDA Hawk 2 CB400T, HONDA Hawk 3 CB400T, HONDA Hawk CB250T, KAWASAKI GPZ250R, KAWASAKI GPZ400/F/F2, KAWASAKI KR250/S, KAWASAKI Z250FS, KAWASAKI Z250FT, KAWASAKI Z400GP, SUZUKI GF250, SUZUKI GF250S
Headlight Bracket For 31mm
About quality and texture be neatly finished in black About the feeling of use I decided to compromise a little and use it, but it doesn't fit Products to buy together Winker bracket, bolt, nut, Difficulty of installation It's hard. It's not for APE100, so I installed it differently from the description Cost performance and comparison with other products I recommend other products even if they are expensive. It's not easy to install because it's a general purpose product. About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I bought this product because I wanted to finish it in black, but it doesn't fit well with ape100 because it's general purpose. I just read what was written in the review. So, contrary to the explanation, I installed it in reverse Bracket As the width narrows, the headlights spread out little by little, so I'm going to compromise moderately There was no Winker bracket, so I installed it as a standard Winker and it became Mickey Mouse View detail
At Ken TEC Exhaust System
The Silencer that came with the Ken-TEC Exhaust System is too quiet, so I bought it.
Silencer is not necessary, but it is fitted for neighborhood disturbance.
Soundly satisfactory.
However, the production is quite cheap for the price.
It was not straight to begin with, so I thought it was something like this.
I'm not sure about the durability yet, but it doesn't look like it will last long.
View detail
Substitution of License Plate Bolt
The cosmetics are expensive, but I am personally satisfied with them.
Actually, the 2nd model Grom was stolen, so I installed this bolt to prevent theft as much as possible. I used this bolt instead of a special tool because the tightening holes are in this shape.
It is a good Accent as it looks Titaniumium color.
After that, the color, etc. that were attached in NORMAL can be added to the quantity as it is.:I was lucky to find a 17mm set with a screw neck that was just the right size.
This is not my original purpose, but I made an imprement for your reference.
View detail
Power consumption is only low.
It is clearly darker than Halogen.
We contacted Manufacturer.
This product is darker than Halogen bulbs, but not brighter.
The Company does not guarantee the accuracy or completeness of the information provided.
The response was.
It cannot be used for Headlight.
View detail
There wasn't enough light.
I replaced the HI with the 01 BANDIT 1200 HI, but the Halogen is brighter and disappointing… It's a Projector Headlight, so it doesn't seem to be an optical axis adjustment issue. View detail
Fits: BUELL CYCLONE M2 [Cyclone]., BUELL FIREBOLT XB9R [Firebolt]., BUELL LIGHTNING XB9S [LIGHTNING]., BUELL LIGHTNING XB9SX [LIGHTNING]., BUELL THUNDERBOLT S3 [Thunderbolt]., BUELL X1 Lightning, BUELL XB12SCG, BUELL XB12SS, BUELL XB12X, HONDA CB400SF, HONDA CB400SF, HONDA NT650V DEAUVILLE [DOUVILLE]., SUZUKI XF650 FREEWIND [Free Wind]., TRIUMPH DAYTONA955i [Daytona]., TRIUMPH STREET TRIPLE, TRIUMPH TT600, BUELL Blast 00-05 for Rear, BUELL S1 Lightning 98-00 for Rear, BUELL THUNDERBOLT Shoulder Bag S3 T 98-05 for Rear, BUELL X1 Carbon Fiber Extreme 98-99 for Rear
High quality Break pads
I used the break pads for my bike and these are great break pads. Last longer and breaking quality is good. Overall performance is great as well View detail
It's a standard product.
I have one because it is a classic.
The roller part needs to be cleaned well, but is it really necessary to do that much work on the sides?
I have never used the longer one on the other side. It's a solid Brush, so I'm not sure how to use it...cleaning Driven Sprocket or something?
I thought it would be better for me to buy a regular Nylon brush.
View detail
time reduction
This time it was used to clean the Chain of GB250 CLUBMAN.
GB250 CLUBMAN is too narrow to clean three sides at the same time because of the narrow width of the chain, so we will clean two sides at a time. In any case, the cleaning time can be shortened.
I thought it would be good to have Brush's One Side anti-scattering Cover because dirt splashes when spraying Chain Cleaner and scrubbing with Long Brush.
After Chain cleaning, GEAR goes in better and feels good.
View detail
Lightweight and durable, no complaints!
[How is it used?
The pad pin of the brembo 4POTCaliper was getting rusty and the brake started to squeal, so I replaced it with a new one for the purpose of repair.
Was the one you received as per Image?
The product was in simple packaging with air Packing only. There is no problem, but it was not a solid Package of Manufacturer.
Was the installation difficult?
Hang in, but just replace the OEM pad pin.
No tools are required as long as the pin is removed.
How was your experience with it?
The weight is lighter, and I no longer have to worry about Rust, so I feel more comfortable.
However, the Snap pin to prevent dropout should be checked.
[Included Parts:were they on?
In addition to the Body Pin, a Snap Pin is included.
[Was there anything that disappointed you?
The dropout-proof RPin was Steel.
Since the Pad pin is Titanium, the Snap pin should be at least Material, if not Titanium as well.:I would have liked it to be Stainless Steel.
View detail
Fits: HONDA FUSION [Fusion]., HONDA FUSION SE, HONDA FUSION X, HONDA FUSION [Fusion] XX
A piece of the upper panels is missing
Hello, I received the product on time, a piece of the upper panels is missing.So it is useless.The fairings are beautiful but a piece is missing and I cannot mount them on my scooter -------------- -------------------------------------------- Good morning. I received the product on time is missing a piece of the Upper Panels. So it serves nothing. The hulls are beautiful but a piece is missing and I can't mount them on my scooter Powered by Google Translator View detail
Fits: YAMAHA GRAND MAJESTY 250 [Grand Majesty] (SG15J), YAMAHA GRAND MAJESTY 250 [Grand Majesty] (SG15J)
This is the coolest Short Screen!
I had been using the standard Long Screen for a long time, but when it got too dirty and the Screw that holds the Screen broke, I replaced it with a Short Screen. As a result, it is much tighter and better looking than I expected, and I like the Large change. The wind pressure on my body is definitely stronger, but above all, it is SMART and cool and makes running even more fun. View detail
It can be used normally
[How is it used?
Use in Touring
Was the one you received as per Image?
Street Image
How was your experience with it?
Performance is not a problem at all, but it is difficult to operate while driving because of the small size of the control button.
[Points to note]
How did it compare to other products?
The price is low and I am fully satisfied.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA FORZA [Forza] (MF06), HONDA FORZA [Forza] (MF06)
Turn signals forsa mf06
Excellent fit and quality. This prduct arrived quicklly and packaged very good. I would highly reccomend for a custom look. View detail
Fits: その他
Position side could not be lit.
The Blinker can light the Pilot lamp, but the Position lamp cannot light the Pilot lamp.:Pair (for Left and Right) Both are lit bonderly.
Plus contact of the mouth Gold, since we could see continuity between the two, did it not match the vehicle?
View detail
Fits: Others , APRILIA RSV1000R, DUCATI Monster900 ie, DUCATI Monster900, DUCATI Monster750, DUCATI Biposto 998, DUCATI 998SP, DUCATI 996SP, APRILIA RSV1000
I like the way it's made.
The Position of the Separate handle outside the company is too tight, so I bought this one which is a little Up.
The price is reasonable, but the construction is quite solid.
The texture of the paint does not look cheap.
The key Position has also become much easier and can be driven without discomfort.
I'm very happy with it
View detail
Fits: その他 12V car
sr400 1.5w To led Sequential Blinker
12v1.5w on body sr400 To led Sequential Blinker
High flasher did not improve and became very hot within a minute, so I stopped using it.
View detail
It's bright
This is the second time I have purchased the License Plate Light and the tail light short due to my own wiring error. I took measures against vibration, mounted them on an aluminum plate, and fixed them to the License Plate Bolt. View detail
Fluffiest ever!
[How is it used?
I use Microfiber Cloth for cleaning things that I don't want to scratch, such as vehicle bodies and helmet shields, and this product is the fluffiest and softest I have ever used.
It is too good to use for cleaning.
Was the one you received as per Image?
It was completely more than Image. I was really surprised in a good way.
How was your experience with it?
It is the best. It does not feel like it is going to scratch at all.
[Points to note]
It is too good to use and there are no precautions.
Highly recommended.
View detail
Fits: HONDA CB50, SUZUKI RM65, SUZUKI RH125, SUZUKI DR200, HONDA MB5, HONDA CR80R, SUZUKI TS250 X 87-89 for Front, SUZUKI TS125 X 85-88 for Front, SUZUKI SX200R SH41A for Front, SUZUKI SX125 R 85-91 for Front, SUZUKI SP250 85 for Front, SUZUKI SP125 86-88 for Front, SUZUKI RA125 SF13A for Front, SUZUKI GX125R 88 for Front, SUZUKI DR125 S SF41A for Front, SUZUKI DR125 E SF41A for Front, SUZUKI DJEBEL200 SH42A for Front, SUZUKI DJEBEL125 SF44A for Front, KAWASAKI KX65 KX65A for Rear, KAWASAKI KSR110 KL110A for Rear
3rd replacement Front Brake Pads
I've been replacing the Brake Pads on my MAGNA50 for less than a month.
I don't know about durability or anything yet.
I think the feel is good.
I had to replace it because it was worn out and no braking at all in the rain.
I still feel that it is difficult to work when it rains.
But this is a Fluid issue and
Caliper may be the cause of the problem.
It is unclear if it is performing as it should.
I'm on a moped, so I maintain my own Brakes.
If you're on a Motorcycle with more Speed.
It is better to hire a specialist.
View detail
Cheap and surprisingly durable! I expect it to be durable as well.
[How is it used?
I bought it to replace a DRCBlinker that was damaged while driving on a forest road. I bought the Sequential type, which was still rare at the time of purchase, for a trial price because it was sold at a discount.
Was the one you received as per Image?
A friend had previously used a non-sequential Blinker of the same design, which was not sequential, so the product looked just like the Image.
Was the installation difficult?
Since the previously installed DRCBlinker was an LED Type and the ICRelay had already been replaced, installation of this product was a simple matter of replacing four BlinkerBodies.
How was your experience with it?
The sequential lighting was very interesting when it first came on after installation, but I soon got used to it.
Visibility is a little poor during the daytime when the sun is strong, perhaps due to the thin body shape. Visibility is perfect from evening to night.
Mounting part is Material:Rubber will take some of the impact, so you don't have to worry about falling over on forest roads.
[Included Parts:were they on?
Nothing, no Instruction Manual.
[Was there anything that disappointed you?
If you can buy a Sequential type Blinker at this price, it is good enough.
I have been using it for about 2 years and the LEDs have never burned out, etc., and it is functioning well.
0Other items that may be useful include
Point and hang of installation
The factory-installed terminals are Plug type. So after purchasing, you need to replace it with your Motorcycle's connection terminal.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, but it is an easy-to-understand product.
If you are not confident "Decent friend." ask the PRO for help.
[Notes]
If the OEM blinker is a Motorcycle that does not have LEDs, replace the LED resistors or ICRelay with LED-compatible ones.
[ITEMS TO BUY TOGETHER
For vehicles with Valve bulbs in the OEM Blinker as described above, please purchase and install LED-compatible resistors or ICRelay for LEDs.
[Opinions and requests to Manufacturer
I would like to see a lineup of types with different designs at the same price.
View detail