Reviews
Good product but paid import tax.
The product appears original and in good condition. It's a shame, however, that having paid import taxes nullified the lower price of the item. so waiting 15 days for shipping is not worth it if you have to pay the same price as in Italy, which arrives the next day. -------------------------------------------------- -------- The product is original and in good condition. Too bad that the fact of having paid the import fees has frustrated the lower price of the article. So having waited 15 days of shipping is not convenient if you have to pay for the same price as Italy, which arrives the next day. Powered by Google Translator View detail
Fits: HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA CROSS CUB50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA CROSSCUB110
Does not fit 23 year old JA56 products
I ordered several parts from We Bike and installed the ones that fit.
Surprisingly, there are too many incompatible parts.
It does not fit the JA56 model, which is an officially imported product from Korea.
Machining is required when installing. Please keep this in mind when purchasing from Korea.
-------------------------------------------------- -------- We are ordered by ordering various parts from Webike, but there are too many parts that are unexpectedly compatible. It is not suitable for the JA56 model, the official imported product of Korea. When mounted, processing is required. Please refer to the purchase of Koreans. Powered by Google Translator
View detail
Very good looking, but...
Pulling on the brake wire is important, but securing the rotating bracket is impossible with a screw lock, and the bracket inevitably moves. However, I think that a more ingenious bracket is needed instead of just using the OEM bracket. View detail
Fits: Others Universal
Yo...
Installed on the License Plate of Mrs. Rebel250.
I have pushed and pulled this product with it installed before and it went gasketed, but it bent with the License Plate, so I think it has no strength at all.
but purchased and installed again lol
This product is a little larger than the License Plate, and the main points of this product are that it is lightweight and can be easily installed. (´∀`)
Incidentally, when using the included anti-vibration sponge, the gap between the license plate and the panel becomes too large and the panel floats.
Overall, I think it is a good product for dress-up purposes.
View detail
![StretchHOTInner Gloves[Fall/Winter ApparelOutlet][special price]](https://img.webike-cdn.net/catalogue/images/125924/rr8854_1_TS.jpg)
somewhat thick
As Inner Gloves are slightly thicker, they are warmer.
However, if you put on thick gloves that are too tight, the fingertips will be compressed, and the fingertips will be cold. 。
Consult with the Gloves you have on hand.
View detail
![PREMIUM ZONE Cap boltCollar [for M8 Bolt].](https://img.webike-cdn.net/catalogue/images/15903/91926_1_TS.jpg)
The color is different because it is a good opportunity!
Since the OEM was a subdued color, we purchased a different color, Blue.
Since the Screen Offset Bracket is made by DAYTONA, it is the same shape and color as the Screen Offset Bracket.
Well, as long as it's beautiful, it's fine. In a way, it's also called individuality. 。 That's fine!
View detail
![[NISSIN Repair Parts for Caliper] Caliper Mount Bolt](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0154/533808_1_TS.jpg)
Fixing Screw
It is used for the Fixing Screw of the Brembo caliper section.
It was not easy to purchase this Size and length to fit, so I was able to buy it nearby.
View detail
![Baby Face x T2 Racing Collaboration Bar End [Single Item]](https://img.webike-cdn.net/catalogue/images/68834/5T0A3035_TS.jpg)
Fits: HONDA NSR250R
Bar End
Bar End, Design is good, so it is replaced.
It is not bad looking.
Quantity:Pair (for Left and Right) Quantity:2pc. The price is a little expensive because it is sold as a single pc.
View detail
Short Stand
Short Stand is safe because the car body will stand up when Lowdown. View detail
Maybe I don't need Front.
I put it on a 2022 XSR900.
Some say it is better not to put it on because it may slip and aggravate the situation, but I assume it will fall over at low speeds.
I thought that the Protector has little protrusion, and since it has a Radiator, I think it is not so meaningful even if it is attached, since it is originally wide.
I hope you don't experience any effects.
Deep socket 10mm is Quantity:2pc. Set is required, so please be prepared.
View detail
stick out firmly.
I put it on a 2022 XSR900.
Some say it is better not to put it on because it may slip and aggravate the situation, but I assume it will fall over at low speeds.
The back seems to stick out and make sense. I hope you don't experience the effect.
Deep socket 10mm is Quantity:2pc. Set is required, so please be prepared.
View detail
Windproof effect is increased.
I installed ExplorerWindshield on my CL500 and love it.
Purchased LargeScreen for additional wind protection
70mm upward and 60mm larger in width.
The windproofing effect has been improved, so Standard Screen
It's good for people who are tall and concerned about Wind Cutting noise.
However, in my case (Height 171cm) The top edge of the Screen is exactly at eye level when you are sitting down.
It bothered me so much while driving that I went back to Standard Screen.
Just taller as above. (180 cm or more) Then I think the top edge will be slightly below eye level.
Combined with the windproof effect, I think it is satisfactory enough.
View detail
![STD Series Chain 420DS Steel [with Clip (RJ) Joint]](https://img.webike-cdn.net/catalogue/10626/420_ds_TS.jpg)
Fits: HONDA MONKEY 125, HONDA NSF100, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO, YAMAHA YZ65, KAWASAKI KLX110L, KAWASAKI KX100, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z125 PRO, HONDA APE100, HONDA APE100 TypeD, HONDA ATC70, HONDA BENLY90S, HONDA C50 SUPER CUB 50 Custom, HONDA C50 SUPER CUB 50 Standard, HONDA C50 SUPER CUB 50 DELUXE, HONDA C50 SUPER CUB 50 BUSINESS, HONDA C50 CUB press 50, HONDA C50 CUB press 50
exchange
The Chain we are using is getting old and we are purchasing this to replace it.
The price is not that high, and the Enhanced Version is said to be 20% stronger than the standard version, so I expect the rest to be long-lasting.
It would have been nice if there were RANups in other colors besides Steel to choose from.
View detail
![[Repair Parts] Flange Bolt](https://img.webike-cdn.net/catalogue/images/119029/00-00-0268_01_TS.jpg)
Exhaust System Fixing
I wanted a Black type Fixing Screw for the Exhaust System part, so I bought it.:1 Set of 4pcs. and the price was not that much. View detail
Chain cut
Since the installation chain is unknown, I bought a little longer and bought this one for a trial because it was cheaper here to cut it.
Although it will not be used often, it corresponds to chain size, 420 to 530, so it will be useful to have 1 pc.
It seems sturdy for the price, and seems to be fine for use.
View detail
Fits: KAWASAKI NINJA 1000, KAWASAKI NINJA 1000, KAWASAKI NINJA 1000 ABS, KAWASAKI NINJA 1000 ABS, KAWASAKI NINJA 1000 ABS
Ninja1000 1-2nd generation Radiator side Pad
Pad between Radiator and Cowl on Ninja 1000.
1-2 generations are common 39156-1775
3rd generation 39156-2140
4th generation 39156-2522
Radiator is the same, but the Cowl is different and so is the cut.
After 10 years of use, SpongeMaterial deteriorates and cracks.
I don't have any problem with it, but I don't like it mentally, so I replaced it.
Double-sided tape is applied from the beginning.
From removing this Double-sided Tape.
Since Tape remains on the Radiator side, Sticker peel and Scraper are used to remove the glue.
After cleaning with Parts cleaner, we sanded and perforated the area.
The positioning of the paste went easily.
This is a relief for a while.
View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03
Nice construction and good design.
Design is good, good make,
It is good for dress-up.
You can enjoy color combinations.
Installation can be a bit tricky...
The drawback is that if it falls over, it is difficult to remove.
If you are going to ride on a mountain pass or Circuit and there is a possibility of falling, you can use a cheap Bar End.
It is a good idea to replace them when they fall over.
View detail
Adjustment
I personally like this Mirror design because it is easy to match with the car body.
This is the first time I have tried to use TurnerSpec. but the adjustment is Large strange. when I try to adjust the Lens, the Turner part is pushed and turns before the Lens part.
I understand that it is natural in terms of functionality.
If the car is to be gapped on the road, we are looking at OEM diversion.
View detail
Fits: APRILIA RS125, DUCATI MONSTER S2821, DUCATI Panigale 899., APRILIA RSV1000 Series, APRILIA RS250, YAMAHA , TRIUMPH DAYTONA675, APRILIA SL750
I went with Gold...
I bought it to go with the rear stand, but I think it would be fine with other Manufactures.
The color jumps with age when exposed to the sun, I think the same for the others.
If so, I'm glad it was inexpensive.
View detail
Bar End
The price is high, but the product is definitely made in Japan. View detail