Reviews
Fits: YAMAHA YZF-R1M, YAMAHA YZF-R1, TRIUMPH STREET TRIPLE 765 S, TRIUMPH STREET TRIPLE 765 R, TRIUMPH STREET TRIPLE S 660, YAMAHA MT-03, YAMAHA MT-25, YAMAHA FZ1, TRIUMPH STREET TRIPLE 675 R, TRIUMPH STREET TRIPLE 675, KTM 125 DUKE, KTM 250 DUKE, KTM 390 DUKE, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-09 SP, YAMAHA MT-09
Interference with Grip when installed as is
[How is it used?
OEM Bar Weight and Replacement
Was the one you received as per Image?
The color was a little lighter than expected and the fact that it was a split system was unexpected.
Was the installation difficult?
It was very easy as it was only stopped by one Screw.
How was your experience with it?
The feeling of use is neither pleasant nor burdensome.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
When installed as is, it interfered with the ThrottleGrip and prevented the Axel from turning. Since the inside diameter was 15mm, we used two 12mm M6 flat washers to lift the Axel.
Other items that would be helpful
Point of Installation
The pure Normal Thread Screw was an M6 screw, but this product is a countersunk screw, so care must be taken not to overtighten it, as it can easily lick.
View detail
Fits: DUCATI STREETFIGHTER V4 S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4 R, DUCATI PANIGALE V4 SP, DUCATI STREETFIGHTER V4, DUCATI SUPERLEGGERA 1299, DUCATI PANIGALE 1199, DUCATI PANIGALE 1199 S, DUCATI PANIGALE 1199 R, DUCATI SUPERLEGGERA 1199, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI STREETFIGHTER V4 S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4 R, DUCATI PANIGALE V4 SP, DUCATI STREETFIGHTER V4
A walking stick before you fall3
[How is it used?
We chose this product because we wanted to protect the Swing Arm.
I chose Red to match the body color and am satisfied with the color, which is ideal.
Was the one you received as per Image?
Swing Arm is more overhanging,
Protection is not complete.
Was the installation difficult?
A handling Instruction Manual is included, which describes the torque for tightening the fixing bolt.
I'm not sure if mine was an outlier or not, because the Left Side Bolt length is too short,
Fixed parts had to be machined.
How was your experience with it?
Unlike the Front, it rotates with the Wheel,
Easy to loosen, Locktite was applied to the fixed Bolt.
[Included Parts:were they on?
A handling Instruction Manual was included in the package.
[Was there anything that disappointed you?
The key Swing Arm cannot be protected.
View detail
Installation is Large
No Manual etc., installation is tricky.
If the OEM bolt is used, it may crack with carbon, and flange bolt etc. must be purchased separately.
Also, the hole drilling is slightly misaligned, so it needs to be pushed in forcefully or some modification is required.
In my opinion, Magical racing”s Rear Fender Chain Guard integrated” would have been better.
And Rai TEC is about the same price to buy 3 Carbon parts around Rear except Rear Mudguard,
Magical racing Front Fender - I also had the manual when I purchased other parts. Above all, I have a sense of security in a domestic product.
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, DUCATI MONSTER 821, DUCATI MONSTER 1200, DUCATI MONSTER 1200 S, DUCATI MONSTER 1200 R, MV AGUSTA BRUTALE, MV AGUSTA F4, YAMAHA MT-07, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R6, YAMAHA XSR 700, YAMAHA XSR 900, YAMAHA YZF-R7, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09 TRACER, YAMAHA MT-10
Subsequent postscript.
The O-ring between the tank and the cap becomes large due to the volatile gasoline.
If you soak it in boiling water for about 5 minutes, it will return to normal.
After a few days, it starts to stick out and come off when touched.
I noticed it popping up while driving, but it was on the highway, so I stopped at Parking to check it out and it was gone. w
In case you are wondering, the cap lid has an O-ring, but it seems to enter the water.
Not a problem if you don't run in the rain, but it's hard to wash the car with water.
I feel like CoreSat 4 is a better choice.
View detail
Fits: DUCATI MONSTER 1200, DUCATI STREETFIGHTER 1098, DUCATI MONSTER 1200 S, DUCATI MONSTER 1200 R, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD 821, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD 821
Simple
I installed Lightech front wheel axle slider on Ducati StreetFighter 1098 with aluminum adaptors include. The installation is simple, nylon slider body is a bit slim compared to another axle slider such as SW motech. View detail
Considerable processing is required!
The finish is Small with some scratches and the texture is inferior to that of FOR JAPAN MODELManufacturer.
The Right Side was able to be installed with only a hole drilling.
The problem is the Left. The distortion was so bad and the dimensions were not enough, so I had to remove a lot of it while repairing.
The instructions stated that a tie band and glue were needed, but that was before the problem. I thought about returning it, but I was so frustrated that I did something about it and installed it!
View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R SE
Rear sliderGreen color
I like Rai TEC products and use them in various areas.
Anyway, it looks beautiful and has a high dress-up effect.
I bought an additional Rear slider because there was no Rear slider in the Birdock Star product line.
Each part is Green color, which gives a sense of unity.
View detail
Fits: YAMAHA YZF-R1M, YAMAHA YZF-R1, TRIUMPH STREET TRIPLE 765 S, TRIUMPH STREET TRIPLE 765 R, TRIUMPH STREET TRIPLE S 660, YAMAHA MT-03, YAMAHA MT-25, YAMAHA FZ1, TRIUMPH STREET TRIPLE 675 R, TRIUMPH STREET TRIPLE 675, KTM 390 DUKE, KTM 250 DUKE, KTM 125 DUKE, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R6, YAMAHA YZF-R7
Fitting
Doesn't fit if you have domino grips so buyers beware but good Color and the quality is good, colour wise it's not as bright I wthought it would be and it didn't take long to arrive View detail
![Repair/Option Parts]Bolt kit for Adjustable License Plate Holder](https://img.webike-cdn.net/catalogue/images/73791/tar009.jpg)
Fits: Others
Check Bolt's Size
I thought it was short because my Memo said M8x30.
I knew it was short…
The Black Dish Bolt with an intensity of 8 is in storage because it is not found anywhere else.
I wonder if the Color Washer has any use…
View detail
Fits: APRILIA RS 660, APRILIA TUONO 660, APRILIA RSV4 FACTORY
Aprilia RS660 Fender Eliminator
The Ry TEC products seem well-made.
It was just that the Fender part was a little shorter than I had expected.
I thought it would have been a little more stylish if it was just below the Tail lamp. 。 I am satisfied with the product because the Fender is shorter than before.
Is it difficult for a beginner to install a license lamp?
There is also the task of taking Earth to MotorcycleBody, which requires knowledge.
The Blinker will also be exposed to the Wiring, so you will need to prepare parts to cover it! I installed a homemade machining box on the Rai TEC product so that the Wiring is not visible. (Waterproof processing and external protection to prevent water and mud from getting on Wiring even in the rain)
If you can tinker with Motorcycle to some extent or have wiring knowledge, Large is sturdy.
I also skipped the Fuse in the Tail section once.
The Instruction Manual is of course the English version.
View detail
Cool!
I installed this when I bought my new car.
I think it's good that it doesn't look like it was just put on.
Material:I think you can also do DamageControl when falling with DURACON.
Easy to install, but may take a little hang to remove.
I would like to drive carefully so as not to be taken care of.
View detail
Fits: KTM 1290 SUPER DUKE R, KTM 890 DUKE, KTM 890 DUKE R, KTM 790 DUKE
Be careful not to forget to buy
It is always necessary to attach this Manufacturer's Protector.
Don't forget to measure the Size before you buy.
View detail
Fits: MV AGUSTA F4, MV AGUSTA RIVALE800, MV AGUSTA F3, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE 10-15, MV AGUSTA F3
Good
I used it on my F4-BRUTALE.
Design or good.
Quantity:Pair (for Left and Right) Since it can be removed separately, it is convenient when you use the Rear Stand.
View detail
Fits: MV AGUSTA BRUTALE 10-15, MV AGUSTA F4, MV AGUSTA RIVALE800, MV AGUSTA F3, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE800, MV AGUSTA F3
I bought this to put on my F4-BRUTALE.
It's pretty good
One Side is independent, so it is convenient when you use the Rear Stand.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX636, KAWASAKI ZX10R
Clutch SideLeverSwitch interferes
The brake lever is fine, but there is a problem with the clutch lever, so I gave it a 3 star satisfaction rating.
The protrusion to push the clutch lever switch is too large even though the car model is supposed to be Exclusive Design.
If it is not processed, the Lever adjustment function will die and LeverSwitch will always be pressed, so it will be impossible to start the engine in 1st gear.
If the protrusion is shaved with a stick file and adjusted, the problem will disappear, but the purchase of the person who cannot do the processing is not recommended.
View detail
Preparation for Bar end mirror
Purchased on the recommendation of others.
I'm considering repainting it in OEM colors because the shape is good, but the color doesn't match slightly.
View detail
The finish is messy.
The surface finish is textured, dull and wound. View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R, HONDA CBR1000RR-R SP
Small processing required
The bolt is M4×25, but it's 2~3mm longer than the original one.
It looks like you need to cut and use, etc.
View detail
Fits: KAWASAKI ZX-10RR, KAWASAKI ZX-10R SE, KAWASAKI ZX-10R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI Z900, KAWASAKI NINJA 250R, KAWASAKI ER-6N, KAWASAKI NINJA 1000, KAWASAKI Z1000, KAWASAKI ER-6F, KAWASAKI Z750, KAWASAKI Z800, DUCATI MONSTER S4, DUCATI ST2, KAWASAKI NINJA 250, KAWASAKI NINJA 400, KAWASAKI Z400, KAWASAKI ZX-6R, KAWASAKI ZX-4RR
Distrust of the people at LighTech
I have purchased this product and am using it now. This product is exclusive for each model of car, however, I asked LighTech directly before purchase how the bolt diameter is different for the same car. The Adapter looks different. I asked him how the shape of theAdapter was different, but he didn't respond by email. I asked further how the shape of that Adapter was different and there was no email response. I bought it for a while and was able to install it, but I have to distrust the people at LighTech. The thing is good. View detail
It doesn't mean anything.
It doesn't work particularly well for me as I don't do Race when I put it on, but I think it's a good dress-up.
Frame to Material:Carbon Style looks good in Parenthesis.
Also, I think it's good that the car body doesn't become extremely heavy even if it's Carbon.
I think it's a completely self-serving thing to put on.
View detail