Reviews
There is a difference color effect!
CRF 250 rally. Red is a distinctive Motorcycle, but I received the impression that Design is tightened by White and Blue Sticker. Sticking is also easy. View detail
Awesome decal
Decal was shipped nicely in a box. Decal measurement was perfect. The decal was easy to apply . It looks nicely on my rear swing arm. It sticks perfectly too.. View detail
Buy with no loss
I pasted it on the 2017 type CRF 250 L, but glue is strong and firmly attached, and the appearance has also improved.
Even if I hit the gate in the garden a bit, I do not wear scratches!
It will be like Racer!
View detail
It is Recommendation as a Material that cuts Number PlateNumber!
- When participating in various Races, the number Plate fee does not become stupid every time.
- I am in trouble if necessary numbers are missing when I want it.
Since there was such a trouble, I originally tried purchasing this product used as Background of Number PlateNumber as a material to cut Number PlateNumber.
Three 300 mm × 450 mm Seats are included and it seems that it is possible to cut out a lot of Number Plate Numbers.
It is troublesome to create it unlike the completed Number, but I can cut it out to my favorite Size and I do not do a sudden shortage as I stock it myself (Lol)
As it is thick, it is also Recommendation for Number Plate of Off-road motorcycle.
It is fun to use it like making a favorite pattern and putting it on Helmet.
[Click here for the impression when used as BackGRAND ↓]
https : / / imp. webike. net / article / 341167 /
View detail
good
I think that Design is good, but be careful not to enter the air when sticking. When air enters, it is difficult to pull out because the adhesive strength is strong. View detail
Background easy to paste and durable even for one year
To purchase JNCC COMP-RClass, I purchased Blue's Background and purchased it.
Originally I liked Design and texture of Number Plate Number of FACTORYFX, so I chose this product without hesitation.
The texture of Seat is as expected and I think that it is probably the same material as Number.
It seems that it is based on Off-road competition, it is thicker and stronger in adhesive strength than ordinary Cutting sheet.
Although it is thick, we can usually cut it with Scissors and Cutter Knife, so the molding work was no problem.
Also strong against Wound, it will withstand washing with high pressure washer.
I think that you can use it for more than 1 year if you treat it as Large Off.
So, I think that COSPA is bad for use at Race who fights only once.
It is Recommendation at Off-road race that will participate throughout the year!
Three 300 mm × 450 mm Seats are included, so Quantity : 1pc. , Quantity : Pair (for Left and Right) You can use two copies.
The pasted vehicle is 2016 Husqvarna TE 250.
Size of 300 mm × 450 mm is not Large enough to cover all of SIDE's License Plate, but I think that the Number Plate of the competition is at most 4 digits, so it is sufficient to adjust the Largeness of the numbers to be pasted must.
View detail
Easy to stick thick. And Cool.
What to prepare : Spraying, Cutter Knife, Dryer, Tools to remove Seat and Exhaust Guard
Before sticking Decal, first remove Exhaust Cover, Seat and clean the surroundings. Finally wipe with Ethanol etc. to degrease. Leave the Cowl attached to the car body attached.
Because Tail cowl has a step, if you paste Decal as it is, the step will float later.
Once decal is turned over and placed in Cowl, where the level difference is Magic etc. draw a Line on the mount. After that, trace a few times with Cutter Knife from the top of Line, you can easily split the mount into 3.
Before splitting, put 5 drops of lottery detergent in the mist and spray on the back and both hands of Decal. It is OK to blow enough to become Vishabisha.
Next we wet the car body as well by spraying in the same way.
Peel off the middle of the mount divided, paste it on Cowl. From the middle of Decal's striking, I will stick past the moisture away from the outside by the belly of the finger.
After making the helicopter part of the step, warm up Decal with Dryer, press Decal on the helicopter, and keep pushing for a while as it warms up (About 10 seconds)
In this way, if you paste both ends in accordance with the level difference, peel off the remaining mounts of the three parts one by one and treat it in the same way.
You can stick it very beautifully if you use Dryer and treat it as a cut end.
Decal itself is quite thick, so it will never cut in the middle of pasting.
It was the first Decal paste with the first car off this time, but if done by the above method, it can be very easy to paste it neatly.
Regrettable price is a bit high, but quality is very good!
And Cool! It's all important here!
View detail
Is Seat's material different depending on Color?
I pasted Black of the same product to the Side cover of KLX 250 before. Seat was also thick and had adhesiveness so it was easy to paste on Beauty without wrinkles easily. This time also I tried to paste White on the Side cover of KLX 250, but it was severe that it did not compare with Black Seat. Seat was thin and hard, even if it was warmed by Dryer, the elongation was bad, the glue stuck to the Side cover despite repositioning but glue stuck out from Seat.
It was not used and it was easy to paste it on Beauty where I pasted it with Black Seat that was left over.
Is it due to a lot? Is Seat's material different depending on Color? Is it a product made by United States?
There is a feeling of gambling in purchasing for purchase.
View detail
SHOWA to Front fork!
I bought it for PCX's Front fork.
Length seems just right.
Length3. It's 5 centimeters wide and 14 centimeters wide..
View detail
I bought it without a picture.
Tentatively, I bought two pieces.
If I thought it was White or Black, it was Red, it was a Red character and a HONDASticker with a Wing mark.
Size is 21 cm in total length, Wing mark is Length 3. 7 cm, horizontal 5 cm, HONDA is Length 2. 5 cm,
It's 16 cm wide.
As the size of Sticker, letters are a bit smaller than that.
View detail
Fits: HONDA CRF250R, HONDA CRF250X, HONDA CRF450R, HONDA CRM250R, HONDA CRM250AR, HONDA XR250, HONDA CR250, HONDA CR125
Even though it is a special item ...
Because it is made in United States ... It is slightly different from the shape of Fork Guard. I thought that it was probably because there was no problem so I did not need a little Cut at Scissors. Design thickness adhesion is perfect. View detail
Hi all, This product is of the highest quality and finish, looks great and easy to apply. I would highly recommend this product to anyone.
Hi all, This product is of the highest quality and finish, looks great and easy to apply. I would highly recommend this product to anyone. View detail
It is a good product - - -
Photographic items "CRF" Although it is one of Logo 's,
I received the goods "Honda" It was Logo's one. Whether it is an error
I checked the quotient ProductNo, "Honda" Fit in Logo
It seems to be. You can read it from the title of the product as well.
As for me, Logo was OK because neither way is OK,
Those who ordered by looking at the photos think that it was better to be warned.
View detail
Is it such a thing?.
I thought what kind of thing it is because there is no product image,
It is an ordinary Manufacturer Logo sticker.
By the way, because it is a solid logo Sticker in horizontal letters,
People looking for Sticker of cut character type buy other items - - -.
Regarding wearing it is not different,
Black stains may start to stick from the edge of the pasted part, which may make your appearance worse.
Well whether it is reasonable considering the price thing.
It is recommended because it is a price that can be used for shipping fee adjustment.
View detail
ImageUP!
Again this is the best for Front fork!
The feeling that I pasted is a good feeling. However, around Seal the glue
Since it protrudes, it is necessary to wipe clean with Alcohol.
The edge got dirty finish for a moment.
However, since Material is thick, I think it is also optimized for scratch prevention.
View detail
cool.
Because it is a thick Material, some Earls etc. can be stuck cleanly.
Parenthesis OK! I recommend you. However around Seal
Since paste sticks out, Alcohol etc. after pasting
It needs to be beautiful.
View detail
Fits: HONDA CRF150R, HONDA CR80R, HONDA CR85R 96-07
Slight cut and paste is necessary.
Design is also good and the material is also thick, so some scratches are quite a bit! In the relationship of Brake hose some Cut was necessary but it stuck well. View detail
It is only looks
This is really just a product that looks like it. Parenthesis If you do get better, that's fine so it's enough.
However, when I applied it while wetting with detergent diluted water at the time of pasting, the whole was white like a few days later. It was too dirty so peeled off once, dried with Dryer and pasted as it was. I think that Decal is Clear and because the front side of Front fork is slightly textured. When pasting this I think that it is good to paste carefully well.
View detail
Fits: HONDA CRF250R, HONDA CRF250X, HONDA CRF450R, HONDA CRM250R, HONDA CRM250AR, HONDA XR250, HONDA CR250, HONDA CR125
It's just cool
I referred to other people's reviews. Originally it is not for CRF 250 L, but I think that it is a dedicated item simply by Cut with Scissors just a little. It will be prevention of Wound and it will be satisfying as it becomes Racer tick. View detail
I am satisfied with Design
Design likes it, but color is not suitable for a car class specially. As you can see from the image, Red is pretty dark. It's easy to paste, it's okay not to worry about prevention of Wound or hitting insects, but I wanted you to make the color just closer to the color. View detail