Reviews
![Easy Wrap Over Pants[Fall/Winter ApparelOutlet][special price]](https://img.webike-cdn.net/catalogue/images/93527/7700_bk_TS.jpg)
Warm is warm
I bought it because my Over Pants that I had used for years were falling apart. the Size may have been wrong, but it was not unusable, so I used it.
It is so easy to put on and take off that it is a big surprise. I thought it was wonderful that I did not have to take off my shoes. On the other hand, I felt a little uneasy because some parts were exposed.
My fears were proven true. The draft was cold. The protected part is warm enough to be hot, but the exposed part is cooled down by the wind. This is how it feels at low speeds in town driving, so the situation may change as the speed range increases.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), HONDA CBR1000RR, HONDA CBR929RRFire blade, SUZUKI GSX-R1000, SUZUKI GSX-R600, KAWASAKI ZX-10R, KAWASAKI ZXR400, KAWASAKI ZX-6RR, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA TZR250, HONDA RVF750, YAMAHA TZR250, HONDA RVF400, HONDA VTR1000SP, HONDA CBR954RRFire blade, HONDA RS250
Shallow angle
It came with a 10° Handlebar, which felt a bit tight, so I bought an 8° Handlebar.
Only drilling of the switch box is required, but I am satisfied because the position is relaxed and the front load is not lost.
View detail
I would also like to have a Sticker for regular Material.
I bought it to put on Goods that have nothing to do with Motorcycle at all.
The material is aluminum for Silencer, but I was wondering if there was a Sticker for other common materials such as vinyl chloride.
View detail
One point
The design is neither good nor bad.
I think it is a good design for One Point because it is quite bright Red.
NameValue is also a sufficient Brand, so I don't think there is anything embarrassing about wearing it separately.
View detail
Fits: HONDA ADV160, HONDA PCX e:HEV, HONDA ADV150, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX
The construction is good.
Material:Stainless Steel and well made.
However, I think that about 4,000 yen is appropriate at the highest.
Instruction Manual is also paperless and not included.
View detail
![Screen [Double Bubble]](https://img.webike-cdn.net/catalogue/images/30991/474_zerogravity_TS.jpg)
Not bad, but ….
I want to change the shape of OEMScreen and [Color] I bought it for the Smoke color.
The quality is not extremely bad, but I was concerned about the White powder like Wax that seems to have been used for finish polishing left between the bumps of the Screen and the thickness is thinner than the OEMScreen.
As a USManufacturer, the roughness of the construction cannot be denied.
It's a drop in the bucket compared to Screen, a domestic manufacturer of Magical racingetc.
Shape and [Color] I am satisfied with the density of Smoke.
Windproofing is not nearly as good as OEMScreen, but I don't care.
Logo sticker was included as a Large and Small bonus.
View detail
Fits: HARLEY-DAVIDSON 3ΩCoil cars
Smaller processing may be necessary depending on the type of car and the type of coil.
Purchased this product as Ignition wire for BMW.
First of all, the length was long, but that was not a problem, because it could be cut off if it was too long.
The connection terminals on the Ignition coil side were simpler than those of the OEM, and the quality of the terminals varied.
I had no problem because I assumed that I would have to change the connection terminal, but I think that those who use it as it is should check it with caution.
Durability is still to be determined.
View detail
Quantity:Set is convenient
Quantity so you don't get lost when buying.:Set sales are very convenient View detail
Fits: YAMAHA RZ50 (New), YAMAHA TZM50, YAMAHA TZR50 R, YAMAHA RZ50 (New), YAMAHA TZM50, YAMAHA TZR50 R
I bought it because there was no OEM Product.
I purchased this product because OEM Product is not available.
It blows up more energetically than NORMAL! I am satisfied with the feeling of use, but the price is high. The price is high, but it is an old car so it can't be helped.
View detail
Helmet In Box needed to be modified.
Product Description With this kit, you can replace the carburetor without the need to modify the Helmet In Box or Cowl." but when the PWKcarburetor was attached, it made contact with the Choke Knob faction.
When the rear suspension sinks, the carburetor almost comes off as it is.
Helmet inBOX processing and Choke Knob processing were used to overcome the problem.
I'm a little disappointed and will be replacing it with Wire-style Chalk.
I don't know if I installed it the wrong way or not... (It only sticks as it sticks!)
View detail
To insure against standing over.
It was a little odd that the cowl had to be removed, so it was a little large, but I was able to install it. I don't know the Torque for tightening, so it would have been helpful if it was written in the Instruction Manual. View detail
Black stainless
When replacing the disc with a new one, the lock nut for fixing was replaced with this Stainless black one.
It is a little pricey in terms of the number of units used, but I am satisfied with the appearance because it is rust-resistant Stainless Steel and Black, which makes it look beautiful.
View detail
Fits: BMW S1000XR, BMW S1000RR, BMW S1000R, BMW C400X, BMW F900R, BMW F900XR, BMW R1200GS LC Adventure water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1250GS, BMW R1250GS Adventure, BMW F850GS, BMW M1000RR, BMW M1000RR, BMW F900GS Adventure, BMW M1000R, BMW F900GS, BMW F850GS Adventure, BMW F750GS, BMW R1250R, BMW R1250R
It's made by Wonderlich, a company you can trust.
I haven't compared it to Chinese products, but I thought it was a sure bet since it is made by Wonderlich, a trusted name in the industry. View detail
GALE SPEED's Radipon's TankNipple's Angle conversion
The GALE SPEED radipon only comes with a TankNipple with Straight and no 90-degrees in Option, though,
for Rear with Angle can be fitted with this AngleNipple.
They are sold in the supplemental parts and can be ordered.
I wrote it here because I can't do imprints on ordered products.
Well, they are essentially the same thing, right?
The Snap ring can be installed, but the Rib part is slightly thinner than the Nipple for Front, so the Snap ring will rotate round and round if the Rib is left as it is. (No exclusions will be made) 。
I have not tried it, but it seems that substituting Nipple for Front for Rear is not possible.
If the O-ring is not old, it is Large sturdy, but you are on your own if you install it.
Hose is normal! Hose clamp is included. The inside diameter is not clear, but it is for brembo etc...
View detail
Fits: KAWASAKI D Tracker 125
Even though the car model Bolt On.
I bought it because it is Bolt On for my car model.
Caliper's Screw is covered by Caliper's Screw.
I can't remove the Caliper Adapter.
I think Straight is a good choice.
View detail
Waterproof property is not good
I bought this for Repair because the original Fender Eliminator License Plate Light was damaged. The light shines well and the visibility is good, but the waterproof property is not so good… Large rainfall causes water to get in… For now, I use it with Duct Tape wrapped around it, but I think it would be better to use it for a long time by coking etc. View detail
Tank capPad
The texture is good but the detailed workmanship is not good. Holes are misaligned. View detail
Fits: BMW C400GT, BMW C400X, BMW C600 Sport, BMW C650 Sport, BMW C650GT, BMW C650GT, BMW F700GS, BMW F700GS, BMW F750GS, BMW F800GS Adventure, BMW F800GT, BMW F800R, BMW F800R, BMW F800S, BMW F800ST, BMW F850GS, BMW F850GS Adventure, BMW F900R, BMW F900XR, BMW G310GS
Made by Wonderlich, a trusted manufacturer
Made by Wonderlich, which is reliable but expensive.
It would be nice to be able to easily extract power from the back of the Heller Socket.
View detail
ODBAdapter
Connect to SMART phone to see Motorcycle information. RPM, etc. View detail
Fits: Others , YAMAHA SR400, YAMAHA SR500
This is what you get if you shorten it.
OEM modified and installed on short fender
The holes in the Type 2 Fender do not match, so modification was necessary.
View detail