Reviews
Full Exhaust System with Japanese Vehicle Inspection Correspondence
[How is it used?
I use it in Touring Main
Was the one you received as per Image?
It is exactly as it looks in the picture, but it was cooler than what I had imaged!
Was the installation difficult?
Exhaust pipe and silencer were difficult to join and leaked without modification.
I contacted Manufacturer and they said that Joint gasket was not necessary, but the exhaust leakage did not stop, so I used liquid gasket!
I think it is a matter of the angle of installation etc., but it did not work as I expected.
How was your experience with it?
The sound is larger than NORMAL, but it is not explosive by any means.
I feel as if the airflow has been lightened.
Exhaust System weighs much less than NORMAL!
[Included Parts:were they on?
There
[Was there anything that disappointed you?
None at all
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI KATANA, SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT
It's best not to use it, though.
Worn to prevent scratches when standing up. It would be better if I didn't have to go out….
The effectiveness is unknown.
To install, simply remove the OEMBolt and install with the supplied Bolt across the collar.
I think it would be better to use Torque wrench.
Since it is a two-point fastening, there seems to be little burden on Frame in the event of an accident.
View detail
V-max 1200 Rear Brembo caliper support
V-max 1200 Rear Brembo caliper support. Perfectly compatible with Brembo 2p calipers. It is also an overlacing product. View detail
Fits: SUZUKI KATANA, SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT
It is easy to install.
I had a hard time deciding which one to go with because they are from various manufacturers, but I decided to go with the OVERRACING Slider installed on my Grom.
The price is a little high, but the quality is worth it and I am satisfied with it.
Bolt is quite tight to loosen, but easy to install.
It seems to protect the body of the car well if it is only a standing strike, but I would be careful not to play an active role w
View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI KATANA, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F
I'll never roll over …
I don't want to be in the care of this guy. View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA Monkey125, HONDA Monkey125, HONDA DAX125
stem nut
It fits perfectly to Honda monkey JB03 Needed holed stem nut for Quadlock mobile phone holder. Of course Package was wrapped perfectly as usal from Webike View detail
Over race fenderless kit
I had the other brand of fenderless kit but I couldn't stop buying new one of overacing one Ffenderless kit they all looks pretty same but this one is different Bit pricy but quality of details are perfect and very stud I Love it! View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125
It's a small thing.
I need it to change Caliper.
It's not very obvious, but I'm not sure if the Over text is a good idea.
Rear also wanted to Over.
View detail
About Pad Overhang
I was casually looking at the new product introduction from WEBIKE, and I saw that the UP Type of Rear caliper support for the new Crab is now on sale from OVER, so I bought it.
I knew that there were some manufacturers that sold a rear caliper support for Crab, but all of them were of the type that was installed on the underside.
As for the installation, we would like to describe our concerns about the Pad, as we have received information from others about the Pad sticking out in their impressions.
First, I installed the Support+NewCrab on the OEMdisc and looked at the contact surface of the Pad and felt about 1mm of contact on the outside.
Next, we removed only the Pad of the new Crab and placed it on the OEMdisc with the OEMPad perpendicular to the OEMdisc. The height of both the Pad of the new Crab and the OEMPad were the same.
As a result, the Pad protrudes 1mm from the periphery of the OVER-made Support, so it is necessary to shave this off.
When shaving the new CrabPad, it would be helpful to trace the outer circumference with Magic or similar to give a guide when shaving.
In our case, we attached a carbide rotary bar to a cheap wired electric drill from Home center and scraped it off, but a File or similar may also be used for a diagonal drop.
If you continue to use an OEM disc with only Caliper+Support replacement, it may be safer to drop a little more than 2mm, since the chamfer of the OEM disc is larger than that of the MADE IN SUNSTAR disc. Therefore, it may be safer to drop a little more than 2mm.
*There may be some errors due to individual differences, so matching the actual product is the best way to be sure.
As for the weight, OEMSupport weighs 391g including the bolt and OVER Support weighs 299g including the bolt, which is about 92g lighter than OEMSupport.
Both of the mounting Bolts are replaced with Titaniumium Bolt.
The total of Caliper support + new Crab + MADE IN SUNSTARRear Disc this time made it possible to reduce the weight by about 400g, but the cost was also quite high, so I thought it was not worth the effort to change.
However, the BlackCaliper felt cheap with SP's Swing Arm, so it is now cooler.
The lightweight under Spring is … I haven't been able to run it that much yet, but it's likely that I don't know much about it.
View detail
OverRear Sets
I was not sure whether to choose "Over" or "gCraft", but I decided to go with "Over" because of the Exhaust SystemSwing Arm and "Over" because I thought it would be more cohesive and have more clarity when installed. View detail
Fender mountstay
It is very good and solidly made! View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125, HONDA GROM
It's so good ??
I replaced the G-Class Firmly, and it has improved the Mission entry to an unbelievable degree. View detail
Full titanium muffler
Clearance with the Swing Arm and Rear Sets, the style is just as I expected and the sound and performance are perfect. View detail
It's expensive, I guess.
As usual, the Instruction Manual is not very helpful, but it is pre-assembled, so it's not hard to find.
There is no doubt about it!
View detail
Fits: HONDA GROM, HONDA Monkey125, HONDA DAX125, HONDA GROM
No matter how you install it ….
The texture as a Sprocket cover is very good.
However, there is a problem with the shift holder part (I don't know if it is an individual difference of the car body or a product problem), the bearing is not at the center of the shaft and the shift pedal does not move smoothly.
When actually driving the car, it would often not go from 2nd to 3rd gear. After removing it, I was able to drive without any problems.
I am very disappointed because I have bought many Over products and have been satisfied with the quality and feel of the products.
View detail
Fits: YAMAHA MT-09
Pad protrudes from disc.
As you can see from the Up photos, the accuracy is very low. The disc is OEM, Caliper is when using brembo's new Crab. MT-09SP (2022). View detail
Over Racing Grom fork bottoms
As we already know, Over Racing is the best in the Japanese motorcycle custom scene. Unfortunately, TASC Texhnix does not sell fork inserts. The customer would have to ship the forks to Japan for servicing. View detail
Fits: KAWASAKI ZX-4RR, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI ZX-4R SE
Not possible to share with 250.
However, the Swing Arm and Rear tire interfere with each other because the Tire is one size thicker than the 250 and the Chain is 2 links shorter than the 250. I tried to solve this problem by setting two small Driven Sprockets, but still only 2mm of Clearance was secured.
In addition, the vehicle height has been raised by about 1 cm at the license plate position, and the vehicle body tilt has become much larger when the side stand is set up.
It was disappointing because this is an expensive product and this should have been mentioned in the product description beforehand.
View detail
Fits: HONDA Rebel250 S Edition, HONDA Rebel250 S Edition, HONDA Rebel250, HONDA Rebel250
The brilliance of the MirrorPlating is a great parenthesis ??????
The appearance, balance, and sound are all perfect for me ?????? View detail
It is necessary for Circuit driving.
Rear Sets from the old Over. View detail