Reviews
Very good finish and texture, but I'm a little concerned about durability
I think this product has a good finish and texture compared to other things. Other products from China have a sloppy bonding area or a cheap rubber feel, but this product has a luxurious texture and is much more fluffy. But one thing I'm worried about is that it's slightly damaged by friction because it's softer than others. The good thing is that the price is quite cheap If this is damaged, I'm going to buy another one :) View detail
Surprisingly time consuming to install.
The car model is Exclusive Design, so it can be installed without interference.
Ideally, I would have liked to install it a little lower, but that was unavoidable.
I'm replacing the OEM Handlebar Clamp Bolt with the supplied Bolt.
It would be appreciated if the Instruction Manual could include the tightening Torque of Bolt. (OEMBolt is 25N?m)
I have read other people's (J.P.P.'s) review of the Large odd useful installation instructions.
I had a hard time tightening it as shown in the third photo because the Hexagon socket I had was too short.
View detail
It comes in handy
This is my impression after using it for more than a year after purchase. At first I was a bit nervous about handling it, but once I got used to it, I could move it to the position I wanted in one shot.
The STAND may or may not be able to move smoothly depending on how it is inserted, but once you get used to it, you will understand the hang and now it has become an indispensable product.
I installed the Side Stand side Mover in the wrong direction, which caused the Side Stand to go up, almost tipping it over (this was the first time, but not the first time). Also, does it depend on the vehicle?
View detail
Fits: KAWASAKI Ninja H2 SX, KAWASAKI NINJA H2 SX
Cospa is good
Engine slider replacement completed
The engine hanger was not replaced, but installed the same way as the OEM Product.
Bolt size is WorldWalkM10 and OEM ProductM8, but I used OEM Product's Washer and it fits WorldWalk well.
Length also OEM Product is Quantity:Pair (for Left and Right) I measured it and it seems to be just right at 65mm, because WorldWalk attaches it at the same length, differently at 70mm and 55mm.
Quantity:Pair (for Left and Right) The way it comes out is different in the following two cases, but it can't be helped.
Can I put this down to stretching my legs when my knees get sore?
View detail
Fits: KAWASAKI Ninja H2 SX, KAWASAKI NINJA H2 SX
The texture is good
Engine slider replacement completed View detail
Casually windproof effect.
Since it is a meter visor, I did not expect the wind protection effect, but I feel that the amount of wind hitting my body has been reduced.
The installation is just a matter of inserting it between the Headlight case and the Bracket on the car body.
It did not match the width of Screen so it was installed on the outside.
Since it is a Universal Product, it is necessary to bend or otherwise work around it.
View detail
Used for E300NT2
Along with the one for E470, I also purchased this 30-liter inner for E300NT2.
It is for WorldWalk's 30-liter, but since the shape is very similar to the N2, I thought it could be used for other purposes, but it was exactly the right fit.
Although they are very similar, they seem to be slightly smaller than those for the 47-liter.
However, it is within the margin of error, so there is no problem at all in using it.
This makes me want another E370 with an Inner! (Lol) 。
View detail
Diversion to E470
I was considering purchasing an inner bag from GIVI to prevent damage to my luggage, but WorldWalk said this one is Exactly, so I bought it.
The cushiony fabric is great for keeping hard objects from damaging the case and the items inside.
As mentioned above, there is a slight, really slight, gap between the Magic tape for fixing and the interior.
The door was easy to open and close, but there were no inconveniences such as difficulty in opening and closing.
They are also reasonably priced, so you don't have to hesitate to replace them when they get dirty or torn.
View detail
Cb300r Rack
The rack fit perfectly and is excellent quantity. Very easy install. The included bolts were too long. I would definitely purchase again if needed. View detail
Good product with good cost performance
I bought this to store my commuting luggage. The vehicle model installed is a ZOOMERX.
The price is lower than those of famous manufacturers, but I think the manufacturing is not bad.
Installation took about 15 minutes.
Size is listed on the Manufacturer's website, but this is the widest frontage section.
Please note that the bottom size is one size smaller than the top size because of the hemmed design.
View detail
Expect a rainy day
I haven't used it in the rain yet, but it is less susceptible to wind.
I had a hard time installing it with one person (the only one available), so I recommend at least two people to do the job!
View detail
I think it's good that it's not slippery
First of all, I think the best part of the product was that it could fix the slippery feeling in the knee grip at the time of brake without slipping. The thickness of the sticker is about 3.5mm, which is not as thick as I thought it would be, but I think it makes it easier to grip even in the normal riding position.
However, I thought the front side was not so much for function as for preventing tank scratches. Personally, I felt that it would have been better to use only the Seat side.:I thought it would be better if it was sold in two ways:1 Set of 4pcs. and 2 pieces in the back, so that we could choose according to our preferences and functions.
I think it is a good product to put up.
Also, please be careful not to let air in when applying, as the front side is a side surface and air may easily get in.
View detail
Mount bar
In the summer, the cell phone is free to shift, so we installed a mount bar to accommodate the GARMIN Navigation system. View detail
Almost satisfied
It looks cool and I like it. However, when installing it, the part that fits into the claw on the Exhaust System side is hard and difficult to insert. The side that receives the claw is like plastic, so it is fragile and large. One side of the claw was broken when I installed it. The feel of the product is fine. View detail
First replacement in 5 years
[How is it used?
I have been using it for 5 years and it is getting old, so I bought a new one.
Was the one you received as per Image?
Five years ago, rounded boxes were in vogue, but now square boxes seem to be in vogue.
Was the installation difficult?
It was installed without any problems.
How was your experience with it?
The old box was 30L, but this time it is 32L, which is large enough to hold a lot of luggage and is very useful.
[Included Parts:were they on?
It came with it, but you may not need it!
[Was there anything that disappointed you?
Mounting Bolt is long, so when installed, the bolt is visible from the back and does not look good.
The old box had an underlay, but this time there was nothing, it was naked.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Attached to YAMAHA BOLT Shoulder Bag
The DAYTONA Multi Fork Clamp was used for installation.
The noisy wind noise has been significantly reduced, and we can now hear the Exhaust System, which had been difficult to hear before.
The narrow width of the screen is good for those who do not want a large screen, but want a certain effect.
The installation was troublesome to adjust because of the many moving parts, especially because the bar of the plating is slightly in the shape of a "-". In particular, the plating rod has many moving parts, so it was troublesome to move one part and the other parts move in tandem.
View detail
Also Exactly in the Inner of GIVI's BOX
It is for a WorldWalk box, but I bought it as Cushion material for a GIVI 47L box.
I used to modify a soft case to carry a NotebookPC and put it on the bottom, but with this Inner, the shape is Exactly from the beginning, and if you can buy it for this Gold amount, this one is definitely a better value.
TOPCase, such as GIVI, without an inner case, things will slide around inside and move, so it is a good idea to have an inner case to prevent scratches on the case itself and to prevent damage to the things you put inside.
The material of the inner material could be a little more luxurious, but since it is a balance with the price, it can't be helped.
View detail
Fairly easy to move
I used it to turn around in a tight spot and it was easy to use without much effort.
Rust is uncomfortable and difficult to move depending on the orientation of the Stand Mover on the Side Stand.
View detail
Knee grip is easier.
I purchased this product because my knee did not hit a good position due to the special shape of the cowl around the tank. It is easy to attach as long as you position it properly.
Since I installed it, I can now get a firm Knees grip.
I have just started using it, but I think it is a good Items.
View detail
It's a good product
This product protects the muffler. But it seems impossible to protect it completely. If you drive at high speed, the protective device may break depending on the speed. There is a great risk if a broken fragment touches the engine or chain in the secondary accident. Please use this product only at low speed slip or fall in place. View detail