Reviews
A constantly evolving Manufacturer
from before I've never done this before. is used
I have repurchased Matte Black from STAND, a collaboration between Nankai Parts and J-Trip!
When I received it in my hand and compared it with
Plating mirror surface was missing.
It looks cloudy like Uniqlo plating.
Or is there a secret that makes it rustproof?
The area of the Rubber on the receiver is now larger.
I think you can tell from the pictures.
Constantly evolving Manufacturer J-Trip
(Incidentally, DAYTONA part number 25298 has a 20mm Adapter on the front stand.
J-Trip is φ15, 17, 19, 22, 24, 27
DAYTONA is φ15.5, 18, 20, 22, 24, 27
Yes, it is subtly Gap!
I want to make it as close to the Stem hole as possible, so if you see this review, please give it a try.
Just 20mm is delicious in XJR1300 and FZr1000, so older Yamaha models would be good!
View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
It was above my imagination.
I use it on my Z900RS. L-Type Arm hangs behind the Swing Arm for easy lift up.
If you are working alone, it is easier to work with a piece of wood under the Side Stand as it is close to parallel.
View detail
SV650 in '99 car.
As long as the width is positioned properly, the Swing Arm can be used perfectly without interference or rattling. View detail
Dream rear stand
Very well made rear stand. Easy to use. Unfortunately due to tight construction, rear wheel can't be turned while bike on stand. Otherwise I'm very happy with this product View detail
It goes up impressively light.
I bought this STAND for Chain maintenance since gsx-s1000gt is not equipped with Center Stand. I had expected it to be able to lift up lightly from previous reviews and YouTube. When I actually tried it, I was impressed by the lightness that far exceeded my expectations. It may be an exaggeration, but it's almost like putting up a Mothers' bicycle STAND. j-trip is amazing.
At first, I was thinking of getting a V-accessory, but the staff at the motorcycle shop advised me that Stand for Beginner was the best recommendation if I was going to do it alone, so I bought it. As a result, I was right. I can lift up and down easily by myself without any worries. I can lift it up and down easily by myself without any worries.
View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
DAYTONA AdjustableSTAND
I use it for REBEL 1100, but I feel uneasy when using Single Body because of its heavy body.:Once the Set is complete there is no problem. I am currently using it with STAND in the Front tire lock. View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
Some parts are pricey, but no problem.
Chain and Wheel cleaning was inconvenient and price.
Buy this one which is Reasonable.
Assembly is required, but the height can be adjusted without any problem. The Hook and the Adapter for direct use of the Swing Arm are included from the start. I purchased a ZETA Swingarm Spool at the same time and used the Hook for its stability.
When using the STAND, hang the vehicle straight with the front brake applied →STAND on the Hook →STAND rearward tip down, and you are done.
Note that there is no Cover on the Hook, so I made a mistake at first and damaged the Swing Arm as much as I could….
There is no wobble, and the feel is satisfactory. Above all, I am satisfied with the maintenance performance of the Large width up.
View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
Just right for REBEL 250
I used it on my REBEL 250. It was very useful for my daughter, who just got her license, to practice clutch and gear changing, and for maintenance afterwards. View detail
Very easy.
I watched the official YouTubeChannel to prep it and it was very easy to use. Car wash and Chain Shiko are very easy. It is so easy to use that I wonder what I had to do with the Roller stand until now. If you wash and maintain your car frequently, this is a must-have item. Additional purchases are a V-receiver, a thing to keep the front brake lever pulled, and a bush to attach it to the car body. I purchased the "Helpful Rubber" as an insurance policy, but it has not been opened yet and has not been used. View detail
Very useful.
I bought this for maintenance because my spoke wheel came loose before and almost caused an accident. It is very convenient. It is also useful for washing the car. View detail
This is good, really easy to work around the front wheels. I also like that it is reasonably priced.
Up to now, when cleaning the front wheel area, the Pantograph jack of for Vehicle was diverted and used, but now it is used with the Quantity:Pair (for Left and Right) I was finding it very tedious to synchronize the On the other hand, I have not been able to get my hands on a front stand. This time, I wandered through Webig's homepage, and this product caught my eye because it was relatively inexpensive and would not take up much storage space when not in use, so I ordered it.
The main usages are as follows.
Product condition:beautifully packaged and without a scratch, the product weight is easy to hold in one hand with ease.
Dimension adjustment:Quantity:Pair (for Left and Right) The screws on both the top and bottom are simply loosened, adjusted to the appropriate dimensions, and then re-tightened.
Removal and installation:Simply raise and lower the handles to align them with the lower part of the front fork.
Storage:When not in use, it can be placed in a corner of a shed, so it does not require much space.
The troublesome work up to now seemed to be a lie, and I was keenly aware once again of the convenience, ease, and power of the special tool. I wish I had purchased it earlier. The price is also very attractive.
View detail
Easy to use
I was using STAND for the first time, but I got used to it and replaced it with V-receiver.
This type can be hung on the Hook while the vehicle body is tilted, so for the first time, it feels the same as STAND and Large.
This will expand the scope of work.
View detail
Easy Front up
I used it on my YZF-R1. It takes more force to raise it than I expected.
The tip of the clip seems to be a little shallow and I was worried that it might come off, but it seems to be large and sturdy.
The structure is such that the Gold genus directly hits the lower edge of the Fork, so those who are concerned about the Wound need to take measures to prevent it.
View detail
A little processing was required.
The inner diameter of the Adapter seemed to be a little small, so I could not install it, and since I did not want to cut down the STANDBODY side, I used a Leutor to cut down the inner diameter of the Adapter I purchased this time so that it would be large enough to fit. Although I was disappointed with the product itself, I am glad that the Adapter only was sold, even if it requires a little modification, because without it, I could not STAND-UP safely. View detail
Needs a little work.
The inner diameter of the Adapter seemed to be a little small, so I could not install it, and since I did not want to cut down the STANDBODY side, I used a Leutor to cut down the inner diameter of the Adapter I purchased this time so that it would be large enough to fit. Although I was disappointed with the product itself, I am glad that the Adapter only was sold, even if it requires a little modification, because without it, I could not STAND-UP safely. View detail
Easy to use!
A must for touching around Front. View detail
easy
I bought this for the purpose of applying ChainGrease and polishing the wheels, and it works well considering the price, although it does require a bit of effort to rotate the Tire. View detail
Not suitable for Side number vehicles.
It is a very effective maintenance tool for vehicles without a center stand. However, if the vehicle is a side number spec. vehicle and has a SIDESaddle Bag, the handlebar will hit the SIDESaddle Bag, so you will need to remove the Saddle Bag. It is better to use a HARLEYPantograph jack such as AstroPROducts for side number cars. View detail
During maintenance such as Wheel, ChainMaintenance, etc.
I purchased Maintenance Stand for the first time and used it for the first time.
To be honest, it was my first time. Will it lift properly?" And "Why don't we take down Motorcycle?" I was worried about a lot of things, but it was surprisingly easy to Quantity:Set is ready.
It may depend on the person, but you can put something thicker on the Side Stand from the beginning to keep the Motorcycle straight and Quantity.:I think it would be easier to Set.
I am concerned that the Gold price is too high and that the Hook will be damaged because it directly interferes with the Hook, which is unavoidable.
View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
It also worked with the YamahaBOLT Shoulder Bag.
Although the only model that was compatible with this product was the Rebel, I thought that it might be effective for the BOLT Shoulder Bag since the Swing Arm is round. I bought it with the intention of becoming a human sacrifice. As a result, I bought it thinking that it would be useful for the BOLT Shoulder Bag, but the Brake Caliper is located under the Swing Arm, and the stubborn Exhaust Bracket is in the way. The BOLT Shoulder Bag, however, has the Brake Caliper under the Swing Arm, and the stubborn Exhaust Bracket is in the way and the position of the Bracket is fixed. The Front Brake Lock is an absolute necessity. View detail