Reviews
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
MONKEY125 beware.
Purchased for maintenance of MONKEY125, such as oil replacement.
Be careful when lowering.
If you lower it too vigorously, your hand may get caught between the Arm of STAND and the License Plate.
Hands get caught, License Plate gets bent….
but with great strength and stability.
View detail
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
STAND for liter machine with excellent cost performance
It's like a CB1300SF exclusive.
Since it is a collective pipe, there is no Center Stand.
It is very useful.
View detail
Questionable quality inspection of products
I received it ahead of schedule, but when I was setting it up for installation to fit my Motorcycle's size,
The Clamp's corner Pipe was not penetrating the ArmHolder's insertion hole (One Side).
I had no choice but to use a slotted screwdriver as a chisel to remove the BALI.
DAYTONA, please inspect your products carefully.
View detail
How about one for Garage?
I purchased this product for the first time for Chain Maintenance.
I was nervous when I put it up for the first time, but Quantity was there without a hitch!:Set is ready.
It is so convenient that I wish I had introduced it sooner.
I am satisfied with the quality of the product, but I have one point,
The hook part was bare gold and it looked like it might scratch the Swing Arm,
I covered it with Fuel Hose, which happened to be available.
Other companies' MAJOR products have already taken countermeasures in this area, so please check this when purchasing.
View detail
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
It is like for CB1300SF to begin with.
It is a 1300 Sioux Four without a Center Stand because of the assembly pipe. I was worried about maintenance because it is very heavy and there are many stories about it falling down and breaking a bone. I have heard many stories about people breaking their bones when they fall over because they are so heavy, so I have been concerned about this for a long time. I would like to use Large stand. View detail
Great Looking & Practicable Spool for Stands
I was very impressed by the quality, I thought for the price the metal quality would be ok, but it's very good. I install it on my new +5 swingarm on my monkey and it fits nice and tight. Highly recommended, will make life much easier with a stand. View detail
good
My car is Hayabusa Suzuki The existing short clamp is dangerous because the car is heavy, but after changing to a non-gyner product, it is possible to stand stably View detail
RearMaintenance
I have been using JTrip's STAND for a long time and have two types of Hooks. Now that I have a new hook on my car Both Sides, I needed a hook on the STAND side to match the new hook, and I thought the Rubber hook I purchased this time would be suitable for that. I have actually used the Rubber hook and it was a good decision because I only need about half the force I used to use. Another good point is that it does not get scratched. View detail
I'm not sure when it was lost.
I bought it because one of the four was gone and the other was cracking.
It explains that double-sided tape makes it harder to remove.
If so, I wish they would put it on from the beginning.
It was a hassle to put it on, so I used Vinyl Tape to prevent it from coming off.
View detail
Easier than Rear stand.
Rear and Quantity:I purchased a set and just pop it in the hole in the back of the Stem. The size of the hole is different depending on the motorcycle, so there are various materials:It has an Aluminum collar.Pull down the Lever and it lifts up easily. It is easier than FOR Rear. But Small Motorcycle:Z900RS CAFE has already installed DOREMI COLLECTION front emblem, so I think it has a lot of load on it, I have given up on it as it can't be helped. If it cracks someday, I will repurchase it. I have no complaints about the front stand. View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
ChainMaintenance and cleaning of rear wheel wheels
Purchased for ChainMaintenance and rear wheel wheel cleaning.
Use the Front Brake Lock to keep the front and rear from moving back and forth.
Easy Lift Up Stand Round Type for rear wheels
Raise the Swing Arm of REBEL1100 is Round Type because it is round.
Otherwise, it won't hook up well.
The rest is done by turning round and round by hand.
When using the product, please do so on a flat surface.
View detail
Small Stand Hook.
I installed this Stand Hook on my SC59 CBR1000RR, and I have noticed that if the Stand Hook is long enough, the whole Swing Arm weld often flies off when the bike falls over. This Stand Hook is very small and I think it will minimize the damage when it falls over. I slip down once after installing the Stand Hook and the Stand Hook was not damaged. I also use the Rear Stand made by the same company, but the Stand Hook is not so small that it is difficult to lift up, and I think it is very easy to use. View detail
Heavy objects are easily lifted
There are many products out there, but I chose J-TRIP. It is already easy. However, L-Shaped Receptor and Small Motorcycle seem to be incompatible, so I purchased a V-shaped Receptor separately and am now using it. View detail
For cleaning front wheel
Purchased for cleaning Front wheel, not used for Rear as there is a Center Stand.
After applying the Center Stand, float the Front a little and apply this STAND to the Quantity.:Set.
The non-slip Rubber is a little difficult to insert because it is more effective than expected.
It looks good for use according to the Instruction Manual.
By idling the front wheel, cleaning is much easier.
View detail
Chain Cleaning and Lubrication
I put the rear wheel on the Maintenance Roller Stand and cleaned the Chain, but the Tire was heavier than expected and a little difficult to turn. I am a beginner, but I managed to do it. View detail
![[Repair Parts] U Type Clamp Attachment](https://img.webike-cdn.net/catalogue/images/109969/29982_TS.jpg)
diversion
It was installed in the STAND of J-TRIP.
There was a rattle, so we eliminated the rattle with an appropriate Bracket.
View detail
Rugged STAND
It is BoxSTAND, Off-road motorcycle owners should have at least one.
I think it would be easier to put the Block under the Side Stand, tilt it to Left, and then put it in from the body Right.
BoxSTAND is so sturdy that once you buy one, it will last you a lifetime.
View detail
Very lightweight
This is a very lightweight STAND. Originally, we were using a STAND made by another company, but it was heavy and a little inconvenient when carrying it or loading it on the transporter. The Battle factory STAND we purchased this time is very lightweight and can be carried easily with one hand. The feel of the STAND is not a particular problem, but it is a little less rigid than the steel ones made by other companies, but I thought that was a trade-off with the lightness.:I like it because it is Stainless Steel and looks very Parenthesis. The bosses are set up differently for each car model, so you should be aware of that when purchasing. I highly recommend this product and I am very satisfied with it. View detail
J-TRIPShort low ler Rear stand
I purchased this for my MT-09.
We considered cheaper companies A and D, but after reading your review, we decided to purchase JT-RIP.
Because there is no room in the length of Garage, we decided to use Short. It is also stable enough.
It helps with maintenance, but if it were cheaper, I would have no complaints.
View detail
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
It is useful for maintenance.
I am using it for maintenance of CB750four. I have to remove the Center Stand because it is wearing the assembly tube. Before I purchased this product, I had a hard time adjusting the chain, changing tires, etc., fighting the fear of tipping over. Now I can do maintenance around Front and Rear by changing the place to hang the STAND. （The only thing is that it is hard for old people to bend down and rotate the jack with the pin spanner, although it is unavoidable due to the structure. View detail