Reviews
It matches well, but has little windbreak effect.
I thought a lot about the blaster cowl before purchasing it. I am very satisfied as it does not harm the RS design and seems to fit well with the tank line.
The paint quality is good and no special defects were found in the product.
However, since the shield is smaller than that of the Sanggik, there is no significant change in wind protection effect.
-------------------------------------------------- -------- I had a lot of concerns with Blaster Cool before purchasing. It does not harm the RS design, and it seems to fit well with the tank line. The quality of the painting is good and no special flaw was found in the product. However, the shield is smaller than the live geek, so the windproof effect does not change. Powered by Google Translator
View detail
Very satisfied.
It fits well and looks great, like a genuine product!
There is a slight interference with the manifold on the right side, so it is inconvenient to widen the gap with the included washer. It would be better if this part was corrected during the manufacturing stage and shipped.
Also, there was a slight defect in the paint, but since I purchased it overseas, it was cumbersome to exchange, so I'm just going to use it.
-------------------------------------------------- -------- It fits well and cool like a genuine product! The right mani folds are slightly interfered with, so there is a hassle to open the intervals with the enclosed washer. In addition, there was a slightly bad painting surface, but it was cumbersome to buy overseas. Powered by Google Translator
View detail
It's a small difference, but I'm very satisfied.
There doesn't seem to be a big difference in length compared to the original, but there is a noticeable difference when installed with a fenderless.
The paint quality is good, but the silver line color is slightly different compared to the genuine product.
There is a slight difference after installation, but it definitely has the effect of making the bike look bigger, so I am very satisfied. -------------------------------------------------- -------- There is no big difference in the length of the pure, but it is significantly different when it is mounted with the font. The seal quality is also good, but the silver line color is slightly different compared to the genuine product. It's a bit different from the installation, but it's definitely a bigger bike. Powered by Google Translator
View detail
Fitting is outstanding!
The fitting is good and I am satisfied with Large! View detail
It has been 2 years since I ordered it….
It has been two years since I ordered it and I still have not received it.
I am already dismayed.
I can't tell you how many times I have had delivery delays.
I know they don't care about meeting deadlines.
I thought MotorcycleBody wouldn't wait this long.
If you are planning to purchase Parts from this Manufacturer
I think you should think very carefully before ordering.
You may have a bad experience.
View detail
Fits: KAWASAKI KX450
Purchase recommended while parts are available.
[How is it used?
I purchased this product to refresh the exterior of my KDX220SR, which had become crusty due to UV rays and age-related deterioration.
Kawasaki OEM Parts already has an exterior other than light cowl. Discontinued. I was wandering around Webike's site and found this product, so I ordered it immediately! Thank you very much.
Did you receive the item as per the Image?
I heard that originally you could choose between Lime green or White, but now only White is on the lineup... I must be grateful just to be able to get the exterior of a Motorcycle that is 20 years old.
Was it difficult to install?
It is a completely simple process and is simply installed in the reverse order of the OEMShroud that was removed from the vehicle body.
How did you like it?
The design is the same, so nothing has changed in terms of functionality, but as I mentioned above, my vehicle had a crusty exterior, so it is now beautiful to look at.
It is a world of complete self-satisfaction, but I am happy just looking at my car in its Beauty exterior.
Was "Included Parts:" attached?
Quantity:Pair (for Left and Right) Side cowl of Quantity:This is a 1 Set only product, with no Included Parts:or Instruction Manual.
Were there any disappointments?
Nothing, I want a Shroud with the same design as the OEM Product." was the hope, so it is sufficient.
Other items that would be helpful
Point and hang of installation
In a sense, this product is also like OEM parts, so there is no hang or anything, but it is definitely better to temporarily assemble the product and adjust the overall adjustment before fixing it in place, just to be sure.
In my case, Side cowl, Rear Fender and Fuel Tank are Other Brand Products. I checked if the gap was not too wide, or if the distortion was not too much, etc., before fixing them in place.
[Availability and clarity of the Instruction Manual
No Instruction Manual, no, but as noted above. All you have to do is remove the same type of parts that were originally installed and install them in the same way." Therefore, an Instruction Manual will not be necessary.
[Notes]
Nothing in particular, but if it is an Other Brand Product Screw holes won't fit." As I mentioned above, this is a situation that can happen on a rather regular basis. "Temporary group." Check the individual balances carefully in the following table, and make modifications as necessary to ensure that they are installed properly.
[ITEMS TO BUY TOGETHER
Since the motorcycles themselves are more than 20 years old, sales of OEM parts as well as other brand products are about to end.
It may be a good idea to replace what you can while you can afford it! (including keeping it Stock).
[Opinions and requests to Manufacturer
As a Minor car enthusiast, I would appreciate it if you could reproduce the product from time to time, even if it is only after orders have accumulated.
View detail
Fits: KAWASAKI KX450
As expected of an OEM product, the precision is perfect.
[How is it used?
I purchased this product to refresh the exterior of my KDX220SR, which had become crusty due to UV rays and age-related deterioration.
Kawasaki OEM Parts already has an exterior other than light cowl. Discontinued. I was wandering around Webike's site and found this product, so I ordered it immediately! Thank you very much.
Did you receive the item as per the Image?
I heard that originally you could choose between Lime green or White, but now only White is on the lineup... I must be grateful just to be able to get the exterior of a Motorcycle that is 20 years old.
Was it difficult to install?
It is a completely simple process and is simply installed in the reverse order of the OEMShroud that was removed from the vehicle body.
How did you like it?
The design is the same, so nothing has changed in terms of functionality, but as I mentioned above, my vehicle had a crusty exterior, so it is now beautiful to look at.
It is a world of complete self-satisfaction, but I am happy just looking at my car in its Beauty exterior.
Was "Included Parts:" attached?
Quantity:Pair (for Left and Right) Side cowl of Quantity:This is a 1 Set only product, with no Included Parts:or Instruction Manual.
Were there any disappointments?
Nothing, I want a Shroud with the same design as the OEM Product." was the hope, so it is sufficient.
Other items that would be helpful
Point and hang of installation
In a sense, this product is also like OEM parts, so there is no hang or anything, but it is definitely better to temporarily assemble the product and adjust the overall adjustment before fixing it in place, just to be sure.
In my case, Side cowl, Rear Fender and Fuel Tank are Other Brand Products. I checked if the gap was not too wide, or if the distortion was not too much, etc., before fixing them in place.
[Availability and clarity of the Instruction Manual
No Instruction Manual, no, but as noted above. All you have to do is remove the same type of parts that were originally installed and install them in the same way." Therefore, an Instruction Manual will not be necessary.
[Notes]
Nothing in particular, but if it is an Other Brand Product Screw holes won't fit." As I mentioned above, this is a situation that can happen on a rather regular basis. "Temporary group." Check the individual balances carefully in the following table, and make modifications as necessary to ensure that they are installed properly.
[ITEMS TO BUY TOGETHER
Since the motorcycles themselves are more than 20 years old, sales of OEM parts as well as other brand products are about to end.
It may be a good idea to replace what you can while you can afford it! (including keeping it Stock).
[Opinions and requests to Manufacturer
As a Minor car enthusiast, I would appreciate it if you could reproduce the product from time to time, even if it is only after orders have accumulated.
View detail
Fits: KAWASAKI KX450
Buy while you can get it.
[How is it used?
I purchased this product to refresh the exterior of my KDX220SR, which had become crusty due to UV rays and age-related deterioration.
Kawasaki OEM Parts already has an exterior other than light cowl. Discontinued. I was wandering around Webike's site and found this product, so I ordered it immediately! Thank you very much.
Did you receive the item as per the Image?
I heard that originally you could choose between Lime green or White, but now only White is on the lineup... I must be grateful just to be able to get the exterior of a Motorcycle that is 20 years old.
Was it difficult to install?
It is a completely simple process and is simply installed in the reverse order of the OEMShroud that was removed from the vehicle body.
How did you like it?
The design is the same, so nothing has changed in terms of functionality, but as I mentioned above, my vehicle had a crusty exterior, so it is now beautiful to look at.
It is a world of complete self-satisfaction, but I am happy just looking at my car in its Beauty exterior.
Was "Included Parts:" attached?
Quantity:Pair (for Left and Right) Side cowl of Quantity:This is a 1 Set only product, with no Included Parts:or Instruction Manual.
Were there any disappointments?
Nothing, I want a Shroud with the same design as the OEM Product." was the hope, so it is sufficient.
Other items that would be helpful
Point and hang of installation
In a sense, this product is also like OEM parts, so there is no hang or anything, but it is definitely better to temporarily assemble the product and adjust the overall adjustment before fixing it in place, just to be sure.
In my case, Side cowl, Rear Fender and Fuel Tank are Other Brand Products. I checked if the gap was not too wide, or if the distortion was not too much, etc., before fixing them in place.
[Availability and clarity of the Instruction Manual
No Instruction Manual, no, but as noted above. All you have to do is remove the same type of parts that were originally installed and install them in the same way." Therefore, an Instruction Manual will not be necessary.
[Notes]
Nothing in particular, but if it is an Other Brand Product Screw holes won't fit." As I mentioned above, this is a situation that can happen on a rather regular basis. "Temporary group." Check the individual balances carefully in the following table, and make modifications as necessary to ensure that they are installed properly.
[ITEMS TO BUY TOGETHER
Since the motorcycles themselves are more than 20 years old, sales of OEM parts as well as other brand products are about to end.
It may be a good idea to replace what you can while you can afford it! (including keeping it Stock).
[Opinions and requests to Manufacturer
As a Minor car enthusiast, I would appreciate it if you could reproduce the product from time to time, even if it is only after orders have accumulated.
View detail
Not bad...
Very expensive but at least good quality. Delivery is fast thought. Happy with the purchase. View detail
I tried to be a human pillar.
I just installed it.
It is still too hot to ride.
I was sweating just installing it.
I thought this one was cooler than the Bikini cowl by the same manufacturer, which has many reviews, so I bought it even though there are no reviews of the product.
I didn't mind the SIDE design etc. and thought it was definitely better looking in person than in the Site photo.
To install, remove the light lens, and then fasten it by playing with the bolt that supports the light case?
Here, when the Bolt is tightened from the outside of the Cowl, the Cowl is slightly dented, but I think it is Spec.
Next, fasten the bolt on the back side of the Horn, which is a challenge unless you have good dexterity.
I will post photos for your reference if you are considering it.
View detail
the worst
I wanted the basic aluminum color, so I bought it because I thought it was an unpainted product. However, the quality of the product is too bad. It's like a defective product, but the manufacturer says there's no problem. I just use it because it's a hassle to return it. Please consider the purchase of unpainted products by referring to the photo View detail
good Visor
very good item Be sure to focus your comments on the product. We do not accept your post if you use same alphabet, number, or mark over 3 characters in a row. We would delete the images if you post the unrelated images to the products or motorcycles, or you post the images that do not meet a requirement of the below. Then we evaluate your post as text. HTML tags are not allowed. Reviews require prior approval before they will be displayed View detail
It can be installed without any trouble.
Texture and accuracy are not as good as they are cheap.
I can install it for the time being, but I would have preferred to keep the OEM version instead of changing it.
View detail
Exclusive, after all!
I used to install Universal Product's products, but the size and small design were not so good, but Road Comet is still a dedicated product and has an outstanding fit!
The paint job is beautiful and the rounded shape is my favorite!
If you want a Bikini cowl, it was a 3 month wait, but it is worth the wait.
View detail
Left Side indentation.
There is a dent on the Left Side and when I requested a replacement, I was told that the dent was for Light adjustment since the mold was taken from an OEMCowl.
Light cannot be adjusted with a recess! Light adjustment is not done with a recess, but with a hole through which the Driver is inserted. I would like to see a clean hole or a flattened hole.
Clear on Carbon is also wavy and drooping!
Please deliver a better product since we are paying a high Gold amount for this product.
View detail
For Paint Base
[How is it used?
I was going to install a Chinese Cowl on my MC21, but after waiting for it to arrive after ordering, I cancelled the order and chose Saiya.
The OEM used Cowl is now enough to buy one Scooter....
Was the one you received as per Image?
Upper and SIDE (Under integrated) Of Quantity:Consists of 1 Set of 3pcs.
Screws and Nut for installation were included as described.
The finish of the paint is good because it is a gel coat that is supposed to be painted, but there are foreign objects on the edges. (probably a pool of FRP resin) The workmanship was not perfect, to be honest, because there were
Was the installation difficult?
In past Impressions, it was mentioned that the mounting holes on the Upper and SIDE were misaligned, but I had no problem with that.
Screws for fixing without any additional drilling (both with the body side, of course) could be fixed. (The photo shows a temporary fastening, so some parts may not be attached.)
However, Headlight could not be installed no matter how hard I tried, so I redrilled the fixing holes.
Also, unlike OEM, there are fewer Product Contents, which is good for ease of installation, but all SIDE and UNDER parts must be removed for maintenance.
How was your experience with it?
Material:The FRP is strong, so it is not at all PeLePera like Chinese Cowl.
As for the CowlDesign aspect, it is somewhat similar to OEM, so it is recommended for both preserving valuable OEMCowls and for Restore of vehicles without Cowl.
As expected, White Gel will float if left as is, so it would be good for those who can paint to some extent.
[Included Parts:were they on?
Screws and Nuts are included, but some of the fixing Rivet for the Screen and Fixing Screws to the car body are required separately.
[Was there anything that disappointed you?
It would have been a perfect score if only the finish on the edge and the position of the hole for the Headlight could be improved.
【Review】
Material:It is good that the FRP is strong and has little risk of breakage.
Although external cowl always has a hole position problem, I was able to install the cowl without any difficulty.
Since OEMCowls are becoming more and more difficult to obtain, it is quite nice to paint FRP Cowl in your own way.
View detail
Carbon print looks impressive adding a modern sporty appearance
About quality and texture, I can confirm that the quality is great and that the material used is ABS (Acrylonitrile Butadiene Styrene) plastic with a carbon print finish.About the feeling of use, The carbon print looks impressive adding a modern sporty appearance.Products to buy together, This right side cover set comes with the bracket and fasteners needed for the fitment but to complete the installation you will be needing to add a Honda Monkey sticker to your cart also.Difficulty of installation, I can say the fitment of the right side cover was very easy due to supplied bracket that attach the cover to the frame is simple to align and position the cover before securing with the supplied fasteners.Cost performance and comparison with other products, The pricing of this product is great you are receiving an impressive modern looking right side cover, that is made from ABS plastic just like the Honda left side cover. There are cheaper options but the design, material used and finish is not as good. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff even added one of their stickers to the order which I'll be adding to my helmet. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Wind protection effect is questionable.
[How is it used?
The wind at high speeds is hard to drive in, so I installed the windshield in the hope that it would provide wind protection.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is easy to install as long as you have a Wrench.
How was your experience with it?
After installation, I went out for touring several times and could not feel the wind protection effect.
Aside from the windshield effect, I think the Meter is now easier to read and looks cooler, so that's a good thing.
View detail
AeroGrill installed.
Installation is easy and requires only 3 screws.
I think it looks Carbon Style and cool.
KOSO's products are also inexpensive, which is a nice gem.
View detail
Good news *optimized for little ones
I am short and have short legs.
Lowered with Lowdown Kit when purchasing GB350S
Seat uncoated and lowered to the limit.
The side cover was in the way and the footing was not good.
I wanted to keep the GB350S Logo, but when I asked the manufacturer about it, they said it was a little bit too small.
I bought it because I thought it might improve my footing.
The Side Cover Left Side can also be fitted with the original key.
The Left Side has a slight bulge of the Side cover on the inside due to its structure.
The Side cover of the Right Side is almost flat, which contributes to a large footing. Thanks to this, the right foot can step on the ground firmly.
When installing Right Side, it can be installed by lifting it up slightly without removing the tank.
Minus1 because there was a hole in the License Plate and it was unnecessary for me who wanted to Design.
View detail