Reviews
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
OEMs are safe, but …
I installed it on a 2011 CB, but there was no Instruction Manual, so I had to go ahead and I referred to the imprints I purchased
LargeThey were helpful
It took about 30 minutes to install it, but it was difficult to set up the STAND I did
I still can't get a hang of it
Because it's OEM parts, I'm not worried about it, but the U shape that attaches to the body of the car is the first thing that comes with the Hook I'm worried that I didn't fit in and straighten out
View detail
As expected of an OEM product, precision is high!
There were only two kinds for VERSYS, and the price was the same level Product The most large strange thing was the installation of Spring, but I investigated on the Net and used ? It was easy to install by the principle of lever The parts I purchased are installed by myself In the past, the Center Stand of the old Motorcycle was attached except for the Off car Is it cost related?
View detail
Kawasaki center stand
I am satisfy with Kawasaki centerstand. It is very strong and has good price . Also they provide bangking sensor for centerstand. I would like to recommend to you. View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Installation is perfect for the OEM Product
There are no details on how to install it and I installed it based on blogs and other sources
The mounting hang of the spring is to hook the spring to the STAND and the motorcycleBody Then you can fix the bolts of the STAND afterwards
The spring has a high spring multiplier and it is impossible to install it later without tools or an amateur
After the spring is installed, you can take a stick like a driver from the Right Side of the STAND Pulling the STAND backwards from the Left Side, you can pull it through the Bolt We're going
Pointing the Bolt with the Right hand while pulling the STAND backwards works well
If there are two workers, ask them to hold the STAND and pull it backwards, the work will be more efficient It is
All you need is a tool, but you'll need to apply grease between the STAND and the Bolt If you can get it from Amazon or other sources, it's perfect
The exhaust pipe is in the way and it is difficult to bend it well It's difficult
You don't have to bend it completely to pull it out, so if you bend both tips, that's fine
View detail
Recommended
All motorcycles should have one. A motorcycle parked on a center stand takes up less room. A center stand is more stable than a side stand and it is useful for maintenance work. This stand fitted perfectly and was easy to put onto the motorcycle. View detail
About the evaluation of RS middle support
It was a lot of twists and turns to buy this middle support. The first time I placed the order, I was deducted by the customs and asked for a high customs clearance fee. In the end, I returned the shipment. This time I was shooting. I was lucky and not taxed. If you don't dare to buy counterfeit parts in China, it is better to use the original factory. The package is punched in, and each screw, accessory, and packaging are neatly classified and clear at a glance. The installation is fairly smooth, it took a lot of effort to install the rubber ring, and the last installation of the spring also took a lot of effort. Maybe the correct method was not found, and the paint was scratched. After installation, I am very satisfied, and I don’t have to look for a helper anymore when checking the oil level! In order to buy this support, it took a lot of twists and turns. The first order was deducted by the customs. I asked for a high and expensive customs clearance fee. Finally I was returned. This time I was shooting, and I was lucky. There are counterfeit parts in the country that are not dare to buy, or the original factory is good, punch card packaging, each screw, accessories, packaging classification is neat and clear, at a glance. The installation is still smooth, that is, the rubber ring costs a lot of effort to install it, and the final installation of the spring is also a lot of effort, may not find the right way, the paint surface is scraped A little, after installation, very satisfied, no need to find help when viewing the oil level! (translated by Google Translator) View detail
very good
Shopping at webike for the second time, good factory parts, reasonable price, well-packed, perfect installation, and punctual logistics. It is much more convenient to lubricate the chain and wash the car with the lift center bracket. It is worth having, and it is a pleasant one For shopping experience, it is recommended that webike put on more original accessories to facilitate the purchase of car friends. The second time shopping in webike, very good factory parts, reasonable price, well-packaged, perfect installation, logistics is also more punctual, with the car center bracket lubrication chain and car wash are more convenient, worth having, a very happy Shopping experience, it is recommended that webike be put on more original accessories to facilitate the purchase of riders(translated by Google Translator) View detail
I ought to have attached it earlier
Half year after buying a vehicle, I was planning to do, I decided to do it because the Body was cheap and seems to be easy to install, so I thought about what to do, if I had a Ratchet belt Super easy, ready in 20 minutes, Wheel cleaning ChainMaintenance makes it easier View detail
US Honda CTX700
This part fits my US Honda CTX700 perfectly. It is fairly easy to get the bike on the stand, with good form. Make sure to get Center Stand Stopper 35-21-01 as well to keep the center stand from hitting the chain. Shipping was fast and it was well packed. Installation was a breeze! See this video for installation guide: https://www.youtube.com/watch?v=VEiN7SPPR3o Thanks Webike!! Excellent service!! View detail
NC750X main stand
The main stand fit well for 2018 NC750X. Installation is easy except for the mainspring if you do not have the proper tool. I use the ratchet strap to pull the tension of the spring that completes the job whole easier. View detail
Convenient to have
It is for S125, but it can be installed without problem with R125.
Since it can be used during Maintenance, we prioritized any Custom.
View detail
Main stand
Item received in good condition and well packed. Received within one week. Quality is okay. Have not yet fixed bt seems legit durable. View detail
Good quality, but heavy weight
The MINIMOTO DAX Stand & Footpeg is a good quality item. Had mine for several years, and the metal, paint and rubber is still holding up as good as any OEM Honda parts. It's very solid, but a downside is high weight. I guess the metal contains a lot of iron, and it could/should have been produced in a lighter steel metal blend. The weight is not that bad if you remove the center stand as I did. I also think it looks better that way. But keep the center stand laying around, it's very handy and quick to attache if you need support for the bike when removing any of the wheels. View detail
Good quality, but high weight
This DAX Main Stand from Tanaka Trading is the same item as the one from Minimoto, and it's great quality. Had mine for several years and the metal, paint and rubber is still holding up as good as any OEM Honda part. It's very solid, but a downside is heavy weight. I guess the metal contains a lot of iron, and it could/should have been produced in a lighter steel blend. The weight is not that bad if you remove the center stand as I did. I also think it looks better that way. But keep the center stand laying around, it's very handy and quick to attache if you need support when removing any of the wheels from your bike. View detail
NC700S
Very good condition and fit installation to my bike. Will definitely order again if I need more parts. Thank you so much for a very good experience. View detail
![RDMOTO Center Stand [Center Stand RDMOTO -]](https://global.webike-cdn.net/photo/impression/54/54f538b2f93ead64217ae67f5d992866L.jpg)
Second Type Model Optimal Center Stand for TDM 850
I was looking for Center Stand for Second Type Model TDM 850 and found that I got this product.
Arrived in about two weeks after ordering, installation started on the spot, and the work was completed in about an hour.
Although it is a simple design, since STAND is easy to hang, it is Large satisfied.
The only dissatisfaction point is the signal wait etc. When the STOP footpeg touches the Left foot when stopping at.
View detail
It is convenient to have it in service
Although I thought that I do not need it at the beginning, I think that it is better when maintenance of Chain, etc. is easier than coming out Motorcycle stand. I wonder if it got a little Large when I braided the lower side with a string with Bike Cover. View detail
It is difficult to adjust the flip angle.
I attached it to NORMAL's 12 V MONKEY.
Maintenance became easier, such as Chain adjustment.
However, adjustment of flip angle is troublesome.
In my case, the Stand Assist bar was in contact with the road when Left folded, so I cut it a little with a Gold saw.
Also, since it interferes with Spring of Side Stand, we try not to use Side Stand as much as possible.
View detail
Balance worst
Originally the Center Stand of Option.
For that matter, the center of gravity Balance is bad from the poor installation position, making it difficult to set up the Center Stand.
The heavier FJR-1300 can lightly stand Center Stand.
This STAND, Large in installation Large strange upper arm An Large change in Balance.
I want somehow.
View detail
DL650 middle support
The goods are well packed and transported home without damage. It is very simple and convenient to install according to the drawings. The installation holes are tightly fitted, very in place, and there is no error. It is recommended to install and purchase the used accessories, which is conducive to long-term parking, chain and tire maintenance. After installing the middle support, the car's ground clearance becomes smaller, and the pedal probe needs to be replaced with a longer one. The goods are packed well and the transport is not damaged at home. According to the drawings installed, very simple and convenient. The installation hole bit tight seam, very in place, there is no error. It is recommended to install accessories for use, which is conducive to long parking, chain and tire maintenance. After the installation of the support, the car from the ground clearance smaller, pedal probe need to replace a longer. (Translated by Google translation) View detail